Windows Server 2003 system state.
Hi guys. This is my first post but I have read lots on the site which has helped loads so thank you!!  I have a Windows 2003 Small Business Edition server which was running a Raid5 up until a few days ago. Unfortunately it suffered 2hdd failures over a weekend and so I could not [...]

Answer Question   |  October 21, 2012  12:14 PM
RAID 5, RAID failure, system state, Windows Server 2003 32-bit

Drive failed in RAID 5. Hotspare did not kick in.
One drive failed in a 6 drive raid 5 array. There was a hot spare but it did not kick in. It says offline. What needs to be done to return the array to full working condition? I would like a hot spare as well.

Answer Question   |  September 21, 2010  4:09 PM
RAID 5, RAID failure, Windows, Windows Server 2008, Windows Server 2008 R2

RAID management with IBM System x3400
hi iam new here and i have some questions to all of you who is working on RAID. 1. i have x3400 IBM SERVER and it has 2 disk with 74 GB each while installing with server cd the only availabel option raid 1 i selected that and after that i install w2k3 server standard [...]

Answer Question   |  March 9, 2009  8:34 AM
Disk mirroring, IBM System x3400, Partition Magic, RAID, RAID 5, RAID 5 fault tolerance, RAID configuration, RAID failure, Storage management