How can i configure raid 1 on hp ml350
How can i configure raid 1 on hp ml350? Software/Hardware used: HP ML350, RAID
How can i configure raid 1 on hp ml350? Software/Hardware used: HP ML350, RAID
10045 pts.
Dell Poweredge T100 RAID 1 setup
I have a new Poweredge T100 It is running SBS 2003 R2. It is supposed to be set up for RAID 1. In MyComputer, I can only see the OS Dive (C:) and DATAPART (D:). I see no indication of RAID or mirrored drives. How can I tell if the RAID 1 is set up correctly. At this point I see no indication of...
I have a new Poweredge T100 It is running SBS 2003 R2. It is supposed to be set up for RAID 1. In MyComputer, I can only see the OS Dive (C:) and DATAPART (D:). I see no indication of RAID or mirrored drives. How can I tell if the RAID 1 is set up correctly. At this point I see no indication of...
Server OS failure need to configure 2nd disk RAID 1
the server had an os fauilure and i would like to build it on the first disk and add the second disk later but configure them both to be Raid 1. Is that possible
the server had an os fauilure and i would like to build it on the first disk and add the second disk later but configure them both to be Raid 1. Is that possible
Logical Partition Windows Server 2003
Hi I am using windows server 2003 standard edition,with three RAID DISKS and I created RAID 0,with capacity totalling to 408 GB,now I want to create a partition.I can't get it right, need help
Hi I am using windows server 2003 standard edition,with three RAID DISKS and I created RAID 0,with capacity totalling to 408 GB,now I want to create a partition.I can't get it right, need help
RAID configuration
I am setting up an additional server as my application server. I have five SCSI hard disks, 1 GB each. The database is projected to grow to nearly 3 GB. How can i configure the system to help proper startup, provide sufficient storage capacity, and protect the database from data loss? Can anybody...
I am setting up an additional server as my application server. I have five SCSI hard disks, 1 GB each. The database is projected to grow to nearly 3 GB. How can i configure the system to help proper startup, provide sufficient storage capacity, and protect the database from data loss? Can anybody...
Raid 5 performance
We're going to re-do the disk configuration on a server due to need for more disk space. It's currently mirrored, raid 1, with 2 10,000rpm drives. We are planning to switch to raid 5 with 4 15,000 drives. Would this be bad for performance?
We're going to re-do the disk configuration on a server due to need for more disk space. It's currently mirrored, raid 1, with 2 10,000rpm drives. We are planning to switch to raid 5 with 4 15,000 drives. Would this be bad for performance?
RAID stripe and cluster size configuration
Does anyone know some way of testing/ tuning the best performance out of a DAS RAID. ie. Different Stripes and formatted clusters for the different types of raid.
Does anyone know some way of testing/ tuning the best performance out of a DAS RAID. ie. Different Stripes and formatted clusters for the different types of raid.
RAID 5 configuration on Dell PowerEdge 2800 hard disk failure
Using DELL Poweredge 2800 with a Raid 5 configuration of 2 hard drives capacity 85GB Ultra 320 SCSI. Hard disks have been showing failure. I tried to bring the hard drives ONLINE by FORCE option provided in the utility manager to configure RAID and got the hard drives up but couldn't login to...
Using DELL Poweredge 2800 with a Raid 5 configuration of 2 hard drives capacity 85GB Ultra 320 SCSI. Hard disks have been showing failure. I tried to bring the hard drives ONLINE by FORCE option provided in the utility manager to configure RAID and got the hard drives up but couldn't login to...
RAID to HP ProLiant DL360 G5 Server
how can i configure raid setup to hp proliant dl360 g5 server?? please anybody answered me...tenx
how can i configure raid setup to hp proliant dl360 g5 server?? please anybody answered me...tenx
RAID management with IBM System x3400
hi iam new here and i have some questions to all of you who is working on RAID. 1. i have x3400 IBM SERVER and it has 2 disk with 74 GB each while installing with server cd the only availabel option raid 1 i selected that and after that i install w2k3 server standard editions now i want to make...
hi iam new here and i have some questions to all of you who is working on RAID. 1. i have x3400 IBM SERVER and it has 2 disk with 74 GB each while installing with server cd the only availabel option raid 1 i selected that and after that i install w2k3 server standard editions now i want to make...
HP ML110 G5 server Raid error
I use a HP ML110 G5 Server with RAID1. When the Raid was broken and i rebuilt it under Windows 2003 Server with the Array Configuration Tool it worked. When the rebuild is finished, some data on the drives are destroyed and the system is unable to reboot. Any suggestions? user submitted
I use a HP ML110 G5 Server with RAID1. When the Raid was broken and i rebuilt it under Windows 2003 Server with the Array Configuration Tool it worked. When the rebuild is finished, some data on the drives are destroyed and the system is unable to reboot. Any suggestions? user submitted
Loading Windows Server 2003 - Raid 5 (3 X 500Gb Drives)
Please forgive my ignorance, I usually deal in code and applications, servers and loading OS's onto them is like talking Klingon to me right now, but I'm learning. I was stupid enough to buy a Dell PowerEdge 800 server with 3 x 500Gb disks already installed (and configured) as a RAID 5. I could...
Please forgive my ignorance, I usually deal in code and applications, servers and loading OS's onto them is like talking Klingon to me right now, but I'm learning. I was stupid enough to buy a Dell PowerEdge 800 server with 3 x 500Gb disks already installed (and configured) as a RAID 5. I could...
Raid 0 Migrating - RAID mode in BIOS causes BSOD
I have a Dell xps 420 that came with Vista 32 bit. I have switched over to Vista 64 bit (and as far as I can tell updated all my drivers). I want to run raid 0. I would like to use the Migrating feture and avoid having to do a fresh re-install. The issue I am having is every time I enable raid mode...
I have a Dell xps 420 that came with Vista 32 bit. I have switched over to Vista 64 bit (and as far as I can tell updated all my drivers). I want to run raid 0. I would like to use the Migrating feture and avoid having to do a fresh re-install. The issue I am having is every time I enable raid mode...
Can RAID 0 volume be deleted and re-added with no data loss?
I have a Dell Precision 690 Workstation with an LSI Integrated RAID controller. I have a 2-disk RAID 0 (what LSI refers to as an IS or Integrated Striping) volume. Recently the motherboard was replaced (and the RAID controller is integrated onto the motherboard). Ever since the motherboard...
I have a Dell Precision 690 Workstation with an LSI Integrated RAID controller. I have a 2-disk RAID 0 (what LSI refers to as an IS or Integrated Striping) volume. Recently the motherboard was replaced (and the RAID controller is integrated onto the motherboard). Ever since the motherboard...
RAID
I currently have four 1 Terabyte HDD. I'm planning on setting up a RAID 1, however I would like to get more space. I researched RAID 5 and read plenty of negative opinions about it. I hate to waste so much space, but I can't take such a large risk for data loss. If anyone could recommend a...
I currently have four 1 Terabyte HDD. I'm planning on setting up a RAID 1, however I would like to get more space. I researched RAID 5 and read plenty of negative opinions about it. I hate to waste so much space, but I can't take such a large risk for data loss. If anyone could recommend a...
How to build or install RAID in Windows XP?
hello to all, i m using window Xp and now want to installed RAID ,but i ve no idea, so kindly ,how to installed RAID and wat is the installation method, thank you.
hello to all, i m using window Xp and now want to installed RAID ,but i ve no idea, so kindly ,how to installed RAID and wat is the installation method, thank you.
hp server installation HP ML350T05 server with 4 quantity 146 GB SAS hard disk drives
i have HP ML350T05 server with 4 quantity 146 GB SAS hard disk drives. i want to configure raid and mirroring. but i dont know anything about it. plz suggest a to z process to do that. suggest any link which referrs this issue.
i have HP ML350T05 server with 4 quantity 146 GB SAS hard disk drives. i want to configure raid and mirroring. but i dont know anything about it. plz suggest a to z process to do that. suggest any link which referrs this issue.
RAID 5
I JUST WANT TO KNOW, HOW TO CONFIGURE RAID5? I DON'T HAVE KNOWLEDGE ABOUT RAID I KNOW WHY IT USED BUT DON'T HAVE MORE KNOWLEGE SO PLEASE GIVE KNOWLEDGE IN TOP TO BOTTOM
I JUST WANT TO KNOW, HOW TO CONFIGURE RAID5? I DON'T HAVE KNOWLEDGE ABOUT RAID I KNOW WHY IT USED BUT DON'T HAVE MORE KNOWLEGE SO PLEASE GIVE KNOWLEDGE IN TOP TO BOTTOM
Best RAID for Database Server
We have 70+ users connecting almost 125 machines to connect to an Intel 5000VSA 4dimm Board Server with 2 Xeon processors, 6 SATA (on-board RAID 0, 5 or 10), 1 IDE port. I want to put the best possible RAID with 200/250GB SATA drives, with Best Redundancy and Performance, irrespective of the cost....
We have 70+ users connecting almost 125 machines to connect to an Intel 5000VSA 4dimm Board Server with 2 Xeon processors, 6 SATA (on-board RAID 0, 5 or 10), 1 IDE port. I want to put the best possible RAID with 200/250GB SATA drives, with Best Redundancy and Performance, irrespective of the cost....
