• Taking and restoring Ghost image for Windows in RAID 5

    I want to take Ghost image for windows in RAID5 and able to restore the image again when the system fails or something happened in the drive.

    Mizomotaz40 pointsBadges:
  • How to install Windows Server 2003 in SCSI HDD with RAID 5 setup mode

    I have a Windows Server 2000 installed with SCSI HDD with RAID 5 setup. Now, I want to install Windows Server 2003, but when I try to install with floppy without reconfigure ride setup, the HDD isn't detected. Please, can you help me?

    sajurvpaytm15 pointsBadges:
  • Dell Poweredge 2800 will not reboot after RAID 5 install

    I have a Dell Poweredge 2800. My situation is that i added 2 hard drives and setup Raid 5 successfully. I installed windows server 2003 and it finds the drives. "a disk read error has occurred" Any help?

    ITKE54,840 pointsBadges:
  • How to backup RAID configuration

    I want to backup RAID configuration, but I don't know how to.

    Shekharss5 pointsBadges:
  • Free IT Book: Network Security Technologies and Solutions

    From the back of the book: "A comprehensive reference to the most cutting-edge security products and methodologies available to networking professionals today. Understand and implement current, state-of-the-art network security technologies to ensure secure communications through the network...

    MelanieYarbrough6,345 pointsBadges:
  • Exchange 2003 server running on Windows Server 2003 that is running out of space on the system partition

    I have an Exchange 2003 server running on Windows Server 2003 that is running out of space on the system partition. I have a RAID 5 configuration. I want to replace the drives with larger ones and resize the partitions in the process. I had two thoughts as a way to do this. One would be to install...

    ITKE54,840 pointsBadges:
  • Adding a new HD to a RAID5 (Server 2003)

    Hello, I need to add a HD to an already existing RAID5. After I add the disk I need to extend my C volume to 25% and add the rest of the space to a D volume that I have created. Does anyone have any steps for these operations that they would care to share to make things easier for me? Thanks in...

    Cquinn5 pointsBadges:
  • From mirror to RAID

    Hi there folks, A client's system has disks with mirror protection. The goal is to stop the mirror protection and start RAID5 with hot spare. I'm going to enter DST, stopr mirror and then start RAID with hot spare. Do I need anything else? Thank you all for your help.

    Aringarosa295 pointsBadges:
  • Is a 3 drive RAID 5 array a good idea?

    I am specifying a new server and have been told that a 3 drive RAID 5 array is not a good idea as I will not have a bootable drive in the event of a array controller failure. A better idea is O/S on a RAID1 mirror with apps too, and data on RAID 5 array of 3 drives. Any comments please.

    Matty751215 pointsBadges:
  • Repurposed Disk In Raid

    Hi All, We have a very old Dell 2950 (RAID 5) that is of course out of warranty. We are planning on replacing that server next month but in the mean time we have a failed drive we want to replace but we want to repurpose a drive of the same size and speed from a retired server instead of putting...

    TechieAndy5 pointsBadges:
  • Does a RAID 5 rebuild include deleted data?

    I understand that common data deletion removes the header and leaves the data. Also most disk mirroring software will include the deleted data. The only real way to normally get rid of deleted data is to copy the existing data to a new drive. If I choose to replace the drives in my array, would the...

    kw116215 pointsBadges:
  • Windows server not boot

    Added two more drives to the existing RAID5 array as logical drives. But after adding the Windows failed to boot. Physically removed the disks but Windows failed again. Any solution to this problem to boot Windows again? Kindly help.

    adminnetworks5 pointsBadges:
  • Windows Server 2003 system state.

    Hi guys. This is my first post but I have read lots on the site which has helped loads so thank you!! I have a Windows 2003 Small Business Edition server which was running a Raid5 up until a few days ago. Unfortunately it suffered 2hdd failures over a weekend and so I could not repair the raid as...

    Natedoggy5 pointsBadges:
  • RAID Configuration in HP Proliant DL360

    I just bought an HP Proliant DL360 G6 Server, I have install the HP Smart array and Configure the RAID 0 and 5 with a 5 HDD SAS 147 GB HDD, I installed Window 2003 E.Edition 64bit on RAID 0 but can not see the RAID 5 which should be the other HDD. Can some one show me how to configure it aft OS is...

    DBOY40 pointsBadges:
  • Punctured Stripe on RAID 5 Array

    We have been having massive problems with a storage array (Dell md3000i). The issue has been escalated to the highest levels of Tech Support, at which point they advised us that we have a "punctured stripe" on our array. The prescribed resolution is to vacate, wipe-out and re-build the array, then...

    ITKE54,840 pointsBadges:
  • How could I expand the volumes and RAID groups to RAID5(6+1)?

    The case is the celerra is captive, that means no navisphere. We have two RAID Groups (4+1) and one Hot Spare. How could I expand the volumes and RAID groups to RAID5(6+1)

    Mohamed198325 pointsBadges:
  • RAID performance

    Which has better performance Raid-1 or RAID-5 ?

    12253585 pointsBadges:
  • Cloning C and G drives on Windows Server 2008

    I need to clone my C drive and G drive on a Windows server 2008. The C drive is a mirror and the G drive is a 6 disk raid 5. What is my best option for cloning this setup?

    TeachMeIT975 pointsBadges:
  • HOW TO CREATE RAID 5 ON A WINDOWS SERVER 2003

    I WANT TO CREATE RAID 5 ON A WINDOWS SERVER 2003. I HAVE ANOTHER QUESTION 1) I HAVE 3 HARD DRIVES, WHICH HAS ALTOGETHER 70 GB, IT'S CONSUMING FAST THE SPACE, SO I WANT TO ADD ANOTHER HARD DRIVE , THERE ARE 6 SLOTS IN MY SERVER CAN I ADD ANOTHER HARD DRIVE IN THE SERVER AND WANT TO ADD THE SPACE OF...

    Pramod225 pointsBadges:
  • Add a drive to a Raid 5 without destroying the data

    Can you change the amount of drives in a raid 5 array? For example we now have 6 136 GB drives in our raid 5 array. Can we add one more drive to the array as either a hot spare or actually part of the array? Currently the array uses all 6 drives.

    Karl Gechlik9,860 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following