Radius Questions

1

NPS RADIUS auth problem
We have an NPS RADIUS auth. problem. Currently we are running a site with 1 RODC and 1 RWDC in paralell as we are transfering all the services to the new RWDC and preparing to demote the RODC. What is left to transfer before i demote RODC is NPS. We were testing RADIUS yesterday evening [...]

Answer Question   |  May 2, 2011  11:38 AM
IAS Server, Radius, Radius Server, RODC
asked by:
70 pts.

Tacacs and authentication on Cisco routers
We have ACS 3.X server for tacacs + and radius authentication in our lan switches. right now i am able to login through tacacs+ only. I want to enable tacacs+ as well as local telnet login . This will help me to login in switches if the tacacs will fail.

Answer Question   |  January 7, 2011  7:58 AM
ACS, Authentication, Cisco Routers, Radius, Telnet
asked by:
400 pts.

RADIUS Server Authentication
Hi Im in a dilemma on how this process works,especially about the shared key. Im currently learning Fundamentals of Network Security and came across this chapter on access-control protocols where they talk about RADIUS,TACACS+ nad Kerberos. I have never set up a Radius system before. This is what the book says that got me confused. [...]

Answer Question   |  November 22, 2010  3:28 PM
Network Policy Server, Radius, Radius Server, Windows Server Authentication
asked by:
5 pts.

Deploying IP address authentication in Radius server
Dear All, Please provide me a solution, where we want to bind IP address with MAC ID of the wireless client and should be authenticated by Radius Server. Is this solution exist? I will be very thankful if you could provide me the solutions.   Akash  

Answer Question   |  April 20, 2010  7:48 AM
Authentication, IP address, IP Address Authentication, Radius, Radius Server, Radius Server Windows 2003, Windows Server 2003, Wireless
asked by:
10 pts.

Guest Access on an 802.11x network
I am trying to set up 802.11x security on our network. The domain machines authenticate fine but a guest machine isn’t able to get access. I have set up a policy for it on the Radius server using it’s Mac address and the Wireless access point recognises the assigned VLAN but lists it as not [...]

Answer Question   |  October 20, 2008  11:15 AM
802.1x authentication, Radius, VLAN, Wireless Access Protocol
asked by:
70 pts.

AP-5131 WAP RADIUS Configuration?
I am in the process of helping my boss apply some basic security to our current WLAN. The company has not applied security to this point since the information we have is not really that confidential and we are in a cynder block building which kills most of the signal before it even leaves the [...]

Answer Question   |  May 21, 2010  4:22 PM
Radius, WAP, Wireless Access Points, Wireless networking, Wireless security, WLAN, WLAN access points, WLAN management software, WLAN protocols
asked by:
215 pts.

Hardware needed for implementing a call termination company?
I plan on implementing a call termination company in Latin America and I have looked at the Hypermedia GSM gateway as a potential component. Is there any additional hardware I need in order to start selling minutes? Do I need a billing/RADIUS solution and how would this work? Would the radius solution authenticate with the [...]

Answer Question   |  April 3, 2008  1:25 PM
GSM, Radius, VoIP
150 pts.

Cisco AcessControlServer – Authentication
Hi I’m configuring a Cisco ACS for our diploma thesis and now i have this problem: The Authentication of the IETF Radius-server operates properlym but the authentication of the nac doesn’t work. All clients come in my quarantine-vlan. In the logs there is the SharedRAC: Quarantine_RAC displayed. I had configure 3 components in “Shared Profile [...]

Answer Question   |  March 27, 2008  10:10 PM
Access Control Server, ACS, Cisco, Radius
asked by:
5 pts.

Poblem Setting Radius Attribibute 22 (Framed-Route)
Hello, Can anybody tell me where to set the radius attribute 22 (framed-route) on a windows 2000 IAS server. Thanks

Answer Question   |  November 1, 2007  5:30 AM
Networking, Radius, Windows, Windows 2000 Server
asked by:
55 pts.

Can’t Find IAS Attribute 22
Hello, I am trying to create a new Remote Access policy. The policy will be for a single user, whose account will be used to log on from a 3G Wireless router, with other computers behind it. To achive this without using NAT on the router I need to set up some attributes under the [...]

Answer Question   |  October 18, 2007  2:45 AM
IAS, Radius, Windows 2000 Server
asked by:
55 pts.

1