Protocol Analysis Questions and Answers

Recent IT Questions

1 - 20 of 41
<<PREVIOUS 1|2|3 NEXT>>

TCP Retransmissions b/c of Checksum Incorrect

We have a problem where some users will complain of slow application response time (on the LAN) from our ERP server, but others will be fine. After many hours of troublshooting I've discovered the following: - Packet Sniff's of affected users shows TCP Retransmissions because the Checksum is...

View Answer   |  Jul 19 2007  3:55 PM GMT
Networking, Ethernet, Network testing
asked by tbitner

  495 pts.

intermittent dns issues not affecting entire network

Hello, everyone. There are two users in my office who are suddenly unable to access some internet sites that they have always been able to access before. I am able to navigate to the sites from other machines in the office with no problems. The two users who are having problems are receiving the...

View Answer   |  Jun 29 2007  11:53 AM GMT
Tech support, Networking, Network monitoring
asked by kfettig

  5 pts.

Dell Optiplex GX520 hibernation/sleep mode issues

Hello, We have several Dell Optiplex GX520's on the network running Windows XP pro. They randomly fall into sleep mode. Moving the mouse will not wake them - you have to push the power button to get them out of sleep mode. Also we are not able to remotely wake them to do patch updates or remotely...

View Answer   |  Jun 26 2007  3:45 PM GMT
Tech support, Hardware, Networking
asked by jmello

  0 pts.

Ristricting sites in group polices on server 2000

hey, i recently tried to restrict certain sites in group polices for a particular group on my network, however the restriction seems to have replicated itsel to the other policies on the network including me the administrator. I went thru the group policies etc., internet securities, so on and so...

asked by Intuition

  0 pts.

What is NAT port forwarding?

Describe in brief how you would set up port forwarding on a NAT router to allow a PC on the LAN to publish its web to the internet.

View Answer   |  Jan 31 2007  6:23 PM GMT
Hardware, Networking, Network management software
asked by 111110

  0 pts.

Routing Between Subnets and between networks

1.I have two separe networks 192.168.0.0 and 192.168.1.0 ,they r physicall connected. What should i configure and where to configure so that host of each network can connect to other host in other network. 2.I have two separe Subnets(after subnetting a class B network),they r physicall connected....

View Answer   |  Jan 10 2007  4:12 AM GMT
Hardware, Networking, Network management software
asked by chinmoymohanty

  0 pts.

odd NIC problem

Howdy all... I have a win2k3 member server with 2 onboard Intel PRO lan connections. One is 100mb the other 1000mb. On the 100mb connection, I can set either a DHCP or Static TCP address and it works fine. On the 1000mb connection, it works fine on DHCP, but absolutely refuses to connect with a...

View Answer   |  Oct 20 2006  5:47 PM GMT
Tech support, Hardware, Networking
asked by TheVyrys

  0 pts.

Network Monitoring tool

Hi I am new to network monitoring. I am looking for pure software based network monitoring/analyzer/traffic generator application that will support 10, 100 and 1G ethernet interface. The application need to run on a laptop sothat when a tech goes out he will be able look at the network from the...

asked by syoganat

  0 pts.

Monitoring the Network

Hi, I have multiple remote sites. I would like to monitor the network and analyze the traffic and its performance in general. For example, how the bandwidth is consumed, if certain activities are unnecessary and how to improve the networks performance by blocking through the firewall like...

asked by maryam82

  100 pts.

Software based WIN Simulation

Hi, I need to test out an application over WAN. The testing includes the response time with different delays and bandwidth requirements. Is there any piece of software (preferably opensource/freeware)which can simulate the WAN for me? The idea is to install two NICs in the Windows/Linux machine,...

View Answer   |  Aug 30 2006  2:30 AM GMT
Hardware, Networking, Network management software
asked by SADnBLUE

  0 pts.

Installation and updates

Howdy folks, Tryin to keep things going around here....need some advice. I have Win2003 servers and Active Directory.....single domain....approx. 100 client computers.....one location. Am upgrading all computers from Office XP to Office 2003. My project: Install Office 2003 and all updates...

View Answer   |  Aug 2 2006  9:36 PM GMT
Tech support, Help Desk, Disaster Recovery
asked by TheVyrys

  0 pts.

Unable to detect a parity error with Windows SDK on a PCI serial card

We are using a 9-bit protocol which sometimes sends a mark state and sometimes sends a space stage. When a space state is sent we want to be able to get a parity error in SDK. We can see the parity error in the hardware register but we want to be able to see the error with Windows SDK software. ...

asked by kfink04

  0 pts.

Network Resource Allocation cum Planning cum Technical Problem

This is the real commercial problem face by my company. Well, the reason I ask this problem is I salute and respect all of you as I believe all of you are as good as network solution company out there, or even better!! Lets me rephrase the entire problem again. Company expand so fast that the...

View Answer   |  May 15 2006  10:17 AM GMT
Tech support, Disaster Recovery, Hardware
asked by hunkgym

  5 pts.

Design NEW network cum NEW IT infrastructure-2

Company expand so fast that the IT infrastructure is not fast enough to cater high volume of traffic; the initial design is not scalable. The number of new branch offices setup caused the company pay a high price in the leased line communication. Salesman and management staffs dial into company...

View Answer   |  May 14 2006  8:21 AM GMT
Tech support, Disaster Recovery, Hardware
asked by hunkgym

  5 pts.

static ip is in the spam list

HELLO ALL, My static ip is in the spam list. What should I do? Thanks a lot

View Answer   |  Apr 12 2006  7:07 AM GMT
Networking, Network management software, Ethernet
asked by UNIVERCITY

  0 pts.

Event ID 13508 in microsoft windwos 2000 server

Hi all I have a three servers with windows 2000 (service pack4 ) and its running active directory and DNS also. My global catalog server (PDC) am calling as server ?A? , others are server ?B? and server ?C?. These are two servers are acting as BDCs. One of the BDC?s Hard disk was crashed last...

asked by management

  0 pts.

Reg. POP3 Service....

Hii Everybody, I have installed Active dir. with win server 2003 and Exchange server, in my home PC for practice purpose using loopback adaptor.... My problem is that using microsoft webmail i am able to send and receive the mails, but using Outlook express i can not..... i checked POP3 and...

View Answer   |  Feb 20 2006  0:55 AM GMT
Tech support, Hardware, Networking
asked by Balasaheb

  0 pts.

NMAP IN WIRELESS

Hello, Can any one explain me what is NMAP , how NMAP works and how to use it. Kind Regards, Gopal.

View Answer   |  Dec 29 2005  9:10 PM GMT
Tech support, Hardware, Networking
asked by breathe

  0 pts.

Postfix and DNS

I have installed Postfix on my server with DNS. I am not sure what information I should provide here so let me explain the setup and goals. I have SuSE Enterprise 9, Apache, Static IP address. In other words a hosted website/server. The goal is to also have this as a mail server. I am able to...

asked by Sapient

  0 pts.

WIRELESS BRIDGES

Dear Sir's, I have two wireless bridges. Master and Slave which are 800 ft apart and two high gain antennas are attached to these units. I am finding a disconnection problem with these bridges. It works for a while but gets disconnected and after doing powercycle on the slave end the...

View Answer   |  Dec 26 2005  9:06 PM GMT
Tech support, Hardware, Networking
asked by breathe

  0 pts.

1 - 20 of 41
<<PREVIOUS 1|2|3 NEXT>>