• Printing from AS400 A4/Portrait/132 car

    WHat do we have to do ( WSCT ) in order to be able to print in PORTRAIT a spoolfile that has 132 caracters on an A4 document

    William110 pointsBadges:
  • Auto Load USB Printer Firmware When Printer Turned On – Linux

    I am using a derivative of Puppy Linux. I compiled the driver for the HP Laserjet 1020 printer. For the printer to work the firmware has to be loaded every time the printer is turned on. I have added the following command to the rc.local file in Puppy Linux which runs every time Puppy Linux boots...

    Bdika5 pointsBadges:
  • Adobe Acrobat 9 Pro won’t print multiple pages

    We have just installed Adobe Acrobat 9 Pro and are unable to print multiple pages from it. Checked the print setup and it looks good. If it's a 5 page print job, it cycles through as if it were going to print all 5 pages, but it only prints 1. We are printing to a Canon IRC2620. Running XP Pro SP2....

    Littlejuanito7420 pointsBadges:
  • Uninstalled papercuts and having trouble with print server on Windows Server 2003

    Hi there i have recently uninstalled a trial copy of paper cuts within my domain, im running windows server 2003 sp2, im finding im having to restart the print service every so often in the day as no one can print, in the "printers and faxes" page on the server you can see that the size of the page...

    Philcrox160 pointsBadges:
  • 400 to 400 printing

    I need to have a spoolfile on AS400#1 that is directed to an outq on AS400#2 as it is created and/or move it manually from outq on #1 to outq on #2. A remote outq exist on #2 but I seem to be missing something on how to access it from #1. The remote outq on #2 will print on printer created on #1. I...

    Bigmac461,000 pointsBadges:
  • iSeries configuration for a DeskJet 940C

    I'm trying to set up a networked DeskJet 940C using a *RMT (LPR/LPD) OUTQ. Per IBM doc, I'm using *HP500 for the MFRTYPMDL, but I can't seem to get the remote outq right. I've tried 'text', 'raw', 'prt1', 'pr1', and 'lpt1' in both lower and upper case with no success. I would want to set the...

    Moriarty510 pointsBadges:
  • Is *JOBCTL needed to view job logs?

    I have read IBM's Security manual and Work Management manual and I know that *JOBCTL is needed to change job priorities and other things for jobs on the system, but I do not see any statements that say *JOBCTL is needed to view the job logs of other user's jobs on the system. Does anyone know if...

    Bkr0963c0 pointsBadges:
  • Bold printing with an HP P1006

    I have an HP P1006 that will not print bold when emulating from BosaNova. All of the other HP printers here emulate an HP LJ 4 and print perfect. If I attempt to emulate this printer as an HP LJ 4 nothing prints at all. I get the same results when trying HP III, or HP II. In summary. I either get a...

    DLM2007285 pointsBadges:
  • Outlook 2007 – Printing ‘tasks’ with calendar

    I have permissions to several calendars that I print their next day's appointments for them to carry with them throughout the day. In Outlook 2003 I was able to print their tasks as well. In Outlook 2007 that area is grayed out (in the 'page setup' part of the print window). I am able to print...

    Marie18315 pointsBadges:
  • AS400 Development/Testing

    Hi, To minimise our laboratory costs, I'm looking at a solution, which will allow me to test our products with an AS400 using the latest OS400 versions, without having to purchase an iSeries. Crazy? Maybe! SAP provide MiniSap (Windows based), which is a basic version of their system, but can be...

    AS400MR0 pointsBadges:
  • MAC NOTEBOOK NETWORK PRINTER ISSUES

    6 COMPUTERS (NON MAC) CONNECT AND PRINT FINE TO THE NETWORK PRINTER. MAC NOTEBOOK RECEIVES ERROR MESSAGE (CANNOT CONNECT TO IPP HOST) WHEN TRYING TO PRINT. ANY IDEAS? THANKS FOR ANY HELP..

    Rustyyy15 pointsBadges:
  • Iseries 5.4 HP Printing.

    We have been replacing our HP printers throughout the organization. I have updated the new IP address within the wrkdevd and updated the driber info. Now when the user prints from the AS/400 it will print portrait instead of landscaped....where should I be looking....this is driving me nuts! THanks

    Rmason345 pointsBadges:
  • Adobe Acrobat 9.0 won’t print

    I installed Adobe Acrobat Pro 9.0 several months ago and have printed from it several times in the past several months. Today it stopped printing. Every time I try to print, it saves to a .pm file instead. I am able to print from MS word and other programs, so it isn't my printer. I have tried...

    AArmani5 pointsBadges:
  • Converting overlay document on AS400 to PDF using Infoprint Server

    I am using Infoprint Server to convert an AS400 printed document using an overlay to a PDF document. The PDF document created is not aligned like the printed document from the AS400. It is off by about 1 line vertically and 2 or 3 spaces horizontally. How can I get the PDF document to be aligned...

    MATCJay20 pointsBadges:
  • Attaching a printer to AS/400 directly via a network port

    Our network is down, our iSeries is up and running fine(from the console). Can we directly connect a printer to the back of the AS/400 via one of the network ports?  How do we define this printer?

    AS400 - Ask the Expert485 pointsBadges:
  • AS400 printing

    ever since i upgraded from V5R1M0 to V5R3M0, i get a CPA3305 on some of my spool files when I send them over to my twin ax connected 6400 line printer. i purchased an *ipds card when i upgraded to V5R1 per my third party software vendor. if i give the message a T, part of the reports get cut off...

    Mkraus0 pointsBadges:
  • AS400 disk initialize info

    Hi All, I am trying to find printable results or logs for a disk that has been initialized successfully by using SST or DST. The procedure normally completes with a single line of "COMLETED SUCCESSFULLY" I need more infomation like model, serial no, sectors or some proof that this particular disk...

    Jf79210 pointsBadges:
  • Printing from Ops Navigator

    I can open my main printer attached to my iSeries using Opts Navigator. When I click on one of the reports to view it I get an error message. The message says "AFP work bench viewer has encountered a problem and needs to close". I have another PC that does not give me the error so I can view the...

    Thunderbird0 pointsBadges:
  • AS400 intreface with other platforms

    Can anybody tell me how to interface As/400 with other platforms say windows or linux for example

    Cute98862892710 pointsBadges:
  • Is it possible to reorganize a very big transaction in one night?

    I want to reorganize a very big transaction file in day end process and it cannot finish within 1 night. The problem is RGZPFM command lock that file ,so the day after , user cannot use that file because it is locked. Do you have any ideas to help me?

    Cookiekitty110 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following