• Configuring a Deciosn Data 6615 Printer – Unlock Key Sequence

    I know this is an old printer, but I am trying to find out how to unlock the printer and change the configuration. I can't remember what is the key sequence is to unlock the printer. PLEASE HELP... Thanks - Bob

    Rbryant10 pointsBadges:
  • iSeries (AS/400) – Wanting to print to PDF using GhostScript or other software

    We have PostScript files on the AS/400 and we need to convert them to PCL for printing and also to PDF. Having much trouble getting Ghostscript even to compile on the AS/400, so I am looking for another "free" method to do what we need. Our software runs in a browser window connected to the AS/400...

    DougRaw0 pointsBadges:
  • RAW ASCII DUMP printer issue.

    I have a printer that has a print job named RAW ASCII DUMP that the printer has been trying to print for over a day. I cannot delete the job and I have tried to stop and restart the spooler service and reboot, but it is still in the print queue (SP?). I need help trying to get this job out of there...

    BuffaloPearson0 pointsBadges:
  • Windows Print Driver Settings

    When printing from Word 2003 to a printer on the network (that is configured using a TCP/IP port) the intial 'Print' window appears to take priority over the print driver. I open Word and click print. On the initial screen the Collate box is unchecked, but if I click Properties and configure...

    Skepticals0 pointsBadges:
  • Generic TCIP Print Server to talk to AS400/ISeries/I5

    We are unable to get the AS400 to talk to a generic D-Link TCPIP Print Server. We can ping from the 400, but we cannot print to it. We setup a remote writer and the spool just stays in a "send" status. Can this be done, if so how? thanks, Mark

    Markp220 pointsBadges:
  • problems with device type.

    I made changes on a Device Type, them I restarted the server. But this changes not appear in spool file. Do you Know why? Regards, Wladimir

    WladimirBA0 pointsBadges:
  • Network Printing over VPN

    Hello, I am currently having an issue printing to network printers over our new site-to-site VPN tunnels. We have two remote networks with a couple HP network printers and the AS/400 cannot connect to them. I also cannot ping computers on the remote networks but all the computers can connect to the...

    Dterry4580 pointsBadges:
  • continue carreer

    Which one of this two has the hihgest rating pay salary and the most demanding jobs, Getting a Bachelor degree in information technology or getting a bachelor degree in networking engineering?

    1hmoiforinfo0 pointsBadges:
  • Printer default issue in XPPRO

    Good client presented this problem to me. We tried several tactics, and now are at a loss. His latest words to me: "I'm running Windows XP Pro, build 5.1, SP2. The printer that the system defaults to at reboot/startup is an HP 6210 "All In One", while the older workhorse that I want to use most is...

    EDtHeAd0 pointsBadges:
  • Zebra printer will not print CORRECTLY through Oracle application(s)

    Glad to see that some of you all have experience with Zebra printers!!! My problem is that I cannot get my custom Oracle application to print correctly to a Zebra TLP 2742 printer. The problem started when an (older) hand held "pistol" scanner failed. Connected to a laboratory balance via Omnilink...

    Poppaman20 pointsBadges:
  • Print job hung in deletion

    Hi All: I currently have a print job hung in ?Deleting printing? which is what is actually stated in the ?Status? field. The printer in question is an HP-G95 which is connected to an HP JetDirect 170X. All users connect to this printer using the Standard TCP/IP Port configuration and thereby using...

    Rjournitz5740 pointsBadges:
  • Wireless Printer Server – Will this work?

    Hello Everyone, I simply want verification and/or advice on the following idea. I have not researched this yet because I wanted other people's opinions. Here's the scenerio: - An office with two PC's and three printers - All three printers are connected via USB onto one of the two PC's and being...

    Juscelino0 pointsBadges:
  • Group Policy (gpedit.msc)

    I was told that one could control, or turn on and off automatic updates for MS Office (2003) by doing it through policy editor. Is this true? and if so where in policy editor can I find the whatfor to do it? Or where do I go to turn it off?

    HarryO690 pointsBadges:
  • Sharing a printer

    Hi I currently have an HP Laserjet 4000T attached to my computer at work - using LPT1. I want to be able to share this printer with the receptionist so that she doesn't have to go to the other room to get her printing. How would I go about this? I have shared it on my computer as HP. But I don't...

    Jade057110 pointsBadges:
  • PC printfiles not being deleted from QUEUES on IBM1332 used as 400 and network printers

    I have several IBM 1332 printers set up to print from the AS400 and print from PC applications(EXCEL,WORD,etc) for networked users. The 400 printing has priority and then PC applications are released. We are having sporadic problems with the PC generated printing not being deleted until we do it...

    Bigmac461,000 pointsBadges:
  • Composing a network-switches and routers

    I am looking for information to help me decide whether to buy a larger Switch or larger Router? I think I need to get all equipment on the same device? I have a small business network with 2 desktops, 3 to 4 laptops, 2 multifunction Printer/Fax/copy/scanners via USB dedicated to PC?s; 1 USB Photo...

    Kfink040 pointsBadges:
  • Printing to a Zebra 160S

    I have a Zebra 160s we want to utilize to print plain text labels. (It's a replacement for a dying dot matrix printer.) The printer is connected to our AS400 using a Jetdirect card. I can print to the printer using TL Ashford's Barcode400 software. However, I would like to use the existing programs...

    Beverly0 pointsBadges:
  • Stop bit problem: USB to Serial Converter attached to motion controller, unable to set for 7-E-2

    I have three different USB to Serial converters, one of them an isolated converter from B&B. One brand of motion controller I work on uses EVEN parity / 7 data bits / 2 stop bits as its default. I find that none of my converters will work on the controller in this configuration. If I borrow a PC...

    Kfink040 pointsBadges:
  • Upgrade step from win nt and win 2000 to win 2003

    I have windowsNT and window 2000 servers with active directory which i want to upgrade to windows 2003,all servers meet requirement for new vesion.Now can same help me on how to upgrade?what steps should i take

    Eduado0 pointsBadges:
  • installing network printers automatically

    Hi, We are running Win2k3 server and Xp SP2 workstations. Since we are an educational institution, we have quite a few different logon/usernames. Integrated are two network printers. My questions is what is the best way to automatically install those two network printers on each workstation and for...

    Kclcit0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following