• Circuit Cards

    Which circuit cards require 2 card slots in a CS1000

    Vt335 pointsBadges:
  • Change Nortel S8000 from Three-phase to Single-phase power

    We have just purchased 50 nortel gsm s8000 frames from europe. these frame are set up to use three phase power. We need them to be single phase power. is it possible to make this change and if so how. Or where would I find this information? The 3 phase power unit is part number NTQA90CD The single...

    Dcfour910 pointsBadges:
  • Is there a way to convert a Nortel GSM S8000 frame from Europe, from 3 phase power to single phase power.

    Is there a way to convert a Nortel GSM S8000 frame from Europe, from 3 phase power to single phase power. I was hoping that there would be a simple solution via a Nortel CAP or Procedure. user submitted question

    ITKE56,100 pointsBadges:
  • ring back

    Is there any way to make a 2500 phone ring back to itself for testing purposes? At the present time we need two people to do this testing. I was told that there was a code you could dial and then hang up and the phone would ring back to itself. Any ideas? Nortel CS1000 5.5 system

    Lhood5 pointsBadges:
  • Calling out on a Nortel plus ICS system

    I have the pleasure of installing a used Nortel plus Phone system. It came with all the good stuff, Applications module, an ICS w/TM, 6 port combo fiber optics card and two CI T1 cards. I replaced one CI card with a LS/DS 4 line Trunk card, and was able to call in and talk to every handset but can...

    Newline4you10 pointsBadges:
  • Nortel IPT Engineering skill sets needed

    What are the skill sets required for a Nortel IPT Engineering?

    SMK5 pointsBadges:
  • Can you use ESA with Carrier Remotes that need to dial different PSAPs?

    I have a 4.5 switch that has 2 Carrier Remote sites loop 56 and loop 40. I have the loops TARGed out and point 911 calls to local truncks installed on the remote loops. 911 dialing works now but I have 3 different routes built that dial 2 different PSAPs. If I set up ESA (we need the on site...

    3MMM5 pointsBadges:
  • Connect a Innovaphone product to a Nortel CS 1000 5.5.12 with SIP

    I would like to setup a Innovaphone IP302 between a KIRK1500 DECT system and a Nortel CS1000 version 5.5.12 with SIP The communication between the Kirk1500 and the IP302 is OK The connection between the IP302 and the CS1000 is the problem! I receive the message forbidden on the CS1000, when I try...

    Sunep5 pointsBadges:
  • Nortel Station Module

    Do you have to power down the phone system to add a station module on a Nortel Modular Plus ? It already has 2 combo fiber cartridges in it.

    Robert7035 pointsBadges:
  • Problem:The client could not connect to the remote computer

    When connecting to the application server several times it gives an error as in the subject and then after a few trials it goes through. Intermittent failures on connection. when trying to join domain i failed with errors indicating that DNS was not resolving the domain name. Or Domain name server...

    Eduado0 pointsBadges:
  • Routing Between Subnets and between networks

    1.I have two separe networks 192.168.0.0 and 192.168.1.0 ,they r physicall connected. What should i configure and where to configure so that host of each network can connect to other host in other network. 2.I have two separe Subnets(after subnetting a class B network),they r physicall connected....

    Chinmoymohanty0 pointsBadges:
  • 10Gbps backbone

    hi i need some help completing a uni assignment. i have a 10Gb SMF cable backbone and i need to connect to a router that supports this. it also need to interface with the rest of the LAN, cat5e cable. i cant seem to find anything viable. any suggestions??

    Mattjgregory0 pointsBadges:
  • Network Resource Allocation cum Planning cum Technical Problem

    This is the real commercial problem face by my company. Well, the reason I ask this problem is I salute and respect all of you as I believe all of you are as good as network solution company out there, or even better!! Lets me rephrase the entire problem again. Company expand so fast that the IT...

    Hunkgym5 pointsBadges:
  • Design NEW network cum NEW IT infrastructure-2

    Company expand so fast that the IT infrastructure is not fast enough to cater high volume of traffic; the initial design is not scalable. The number of new branch offices setup caused the company pay a high price in the leased line communication. Salesman and management staffs dial into company...

    Hunkgym5 pointsBadges:
  • Microsoft exchange 2003

    Hi guys, i just got a contract in a new company tha wants to start using microsoft exchange 2003. could you kindly explain how to go about cinstalling and configuring their network for exchange. thank you

    Bornvee0 pointsBadges:
  • Remote Syslog with MySQL and PHP

    Dear All, i want to set up a Remote Syslog with MySQL and PHP on system with whitebox linux,can some tell me a step by step on how to install and configure this,also the requirement needed to complete the task Regards Edwin

    Eduado0 pointsBadges:
  • Cisco 7606 Vs. the compitition, Foundry XMR series or other.

    My company is looking to purchase a new router, we are looking at expanding our cable tv division down the road with video/ video on demand and need to upgrade our current router due to bandwidth constraints, my question is does anyone have a different router good or bad. All answers are welcome...

    Dfng200215 pointsBadges:
  • VPn solution required for remote IP telephony

    We would like to have remote ip telephony connectivity for our office so that it will be helpful for our remote users and our Royal customers to have ip soft phone which will be connected to our network through VPN tunnel to our IP PABX and dial out locally. We are having ADSL modem connectivity...

    Gobinatty0 pointsBadges:
  • Synchronization of application servers

    hi all my company has about 30 application servers,so when i want to install something i have to do it on 30 servers which is very time consuming.due to this I Need a way to update all application servers using a single installation routine. can someone help please

    Eduado0 pointsBadges:
  • Setup an sms to email gateway

    Required to setup an sms to email gateway so that customers can SMS the problem they face with Internet or other systems and it can be uploaded into the systems using an email.

    Eduado0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following