HOW DO TAKE NUMBERS OUT OF A SWITCH THAT HAVE BEEN CDP’D TO THAT SWITCH AND REPLACE THEM WITH NEW NUMBERS. WE ARE ADDING BLOCKS OF 200 CONSECUTIVE NUMBERS TO REMOTE SWITCHES AND NEED TO CHANGE OUT THE EXISTING NUMBERS FOR THE NEW CONSECUTIVE NUMBERS.
Answer Question | February 7, 2011 9:08 PM
CDP, DSC, Nortel CS 1000, RLI, Switches, Switching
We are expanding and this is my first ISDN DTI installation. Can anyone just help me get my mind around the procedures. Thanks
Answer Question | October 11, 2010 5:46 PM
CMS, ISDN, ISDN Configuration, ISDN Equipment/Services, Nortel CS 1000
How can i see the list of the used and available pick up groups (RNPG) ? In which LD should i look and what are the command lines to be used
Answer Question | October 17, 2010 10:29 AM
Avaya, Nortel CS 1000, RNPG, VoIP Configuration
I have a CS 1000 running over a PRI. One of the external services we use to process calls requires that we embed a pause in the dial string. As an example: Certain calls to certain area codes and exchanges will be routed through this external service. When the CS 1000 see’s someone has dialed [...]
Answer Question | May 19, 2010 4:32 PM
CS1000, Nortel CS 1000, Routing and Remote Access
Does anyone know how I set up a linear hunt group for Nortel CS1000? I need to have 3 extensions in the hunt, number one will ring and if not answered it would roll to 2nd phone and the 3rd number will ring at the same time on 9 phones. I know I need MCR [...]
Answer Question | August 20, 2009 6:16 PM
hunt group, IP telephony, Nortel CS 1000
Is it possible to set up Automatic Call Distribution on the Nortel CS 1000 without using the agent login functionality?
Answer Question | July 22, 2009 3:18 PM
Agent Login, Automatic Call Distribution, Nortel, Nortel CS 1000
We own a Nortel CS1000 Option 61 and I will like to dial to a cell phone just by dialing a number and then the extension number. For example Jones ext is 2444 to dial his cell just dial 82444.
Answer Question | November 12, 2009 6:37 PM
Nortel CS 1000, Nortel CS1000 Option 61
Which circuit cards require 2 card slots in a CS1000
Answer Question | May 20, 2009 2:15 PM
CS1000, Nortel, Nortel CS 1000
Is there any way to make a 2500 phone ring back to itself for testing purposes? At the present time we need two people to do this testing. I was told that there was a code you could dial and then hang up and the phone would ring back to itself. Any ideas? Nortel CS1000 [...]
Answer Question | May 4, 2009 4:56 PM
Nortel, Nortel CS 1000, Nortel Ethernet Routing Switch 2500 Series
I forgot to include the phone system in my last question. I have a Nortel CS1000 system and the user cannot transfer calls all the time.
Answer Question | April 22, 2009 6:35 PM
Nortel CS 1000, Telephony
We Recently installed a Nortel CS1000. Can anyone tell me what load (i.e ld 20) in the virtual system terminal and the command sequence to change the call pickup group (RNPG)?? everything seems to be ok in the GUI interface for these extensions, but I’m finding a lot of times the gui changes don’t take.
Answer Question | January 16, 2009 3:07 PM
Nortel CS 1000, PBX, RNPG, Virtual System Terminal
What are the exact steps to programing a ISDN line in the Nortel CS 1000?
Answer Question | December 4, 2008 3:33 PM
CS1000, ISDN, Nortel CS 1000
I would like to setup a Innovaphone IP302 between a KIRK1500 DECT system and a Nortel CS1000 version 5.5.12 with SIP The communication between the Kirk1500 and the IP302 is OK The connection between the IP302 and the CS1000 is the problem! I receive the message forbidden on the CS1000, when I try to connect [...]
Answer Question | November 24, 2008 9:09 AM
Gateway interfaces, Gateways, Innovaphone, Innovaphone IP302, IP phones, KIRK 1500, Nortel, Nortel Communication Server 1000, Nortel CS 1000, SIP, SIP trunking, Telecom