• Remote access from a public IP to a private IP with Windows Server 2003

    I have a problem with my Windows Server 2003 SP1. I configured it as a router with 2 NIC (WAN and LAN) to provide internet access to our clients as an ISP, and this is working very well. My problem started when a client asked me for remote access directly from a public IP address to his private IP...

    WindowsServerATE335 pointsBadges:
  • Cisco Site to Site DMZ Question

    Server A: 192.168.1.219 Server B: 192.168.2.220 10.10.10.10 1 gateway at 10.10.10.1 on Server B. Server A needs to connect to Server B. A can ping anything on 192.168.2.x but it cannot ping 192.168.2.220. Server B has two nic cards, hence two IP's, the internal of 192.x and the dmz 10.x. The...

    bradob160 pointsBadges:
  • NIC Does the NIC changes the binary data to analog signal or to digital signal ?

    Sir , Does the NIC changes the binary data to analog signal or to digital signal ? I mean did the data traveled on cat 5 cable between two pc connectd through NIC is in Digital OR Analog signal ?

    Kkdave15 pointsBadges:
  • Configuring local stroage network

    on my XP machine, I have 2 NICs (one connected to a GB network and on only to a switch connected to only 2 networked disks [Ximeta Netdisks]). On the GB connection (my local area connection) I am running all the standard protocols and on the other NIC (my local storage network) I am running...

    Veltkamp0 pointsBadges:
  • W2K Advance Server 2 nics, DHCP and DNS enabled, clients cannot connect to internet, server can

    Hello, I have a W2K Advance Server using a router with the following informatipon provided, the one board NIC is conected to a router which I can connet to the internet, the clients cannot: On board NIC: Connection Specific DNS: swbell.net DCHP Enabled: Yes Autoconfiguration Enabled: Yes IP Address...

    Dlwick30 pointsBadges:
  • Is it possible to setup wifi on a 3rd Nic in win 2k3?

    We have 1 domain with 30 client computers setup to it. We would like to offer public wifi from the same internet connection with a 3rd NIC card but we are unsure on how to set it up. Also we don't want public computers to access network resources. Our setup is Cable modem to server >>>...

    Sockoe15 pointsBadges:
  • Deleted Driver

    I reformatted an HP Pavilion xt963 computer with windows xp sp 3, I then went to connect to my dsl and no connection, I found out that the reformat deleted my nic driver. How can i download it? There is no network adapter section in my device manager, and I can't find the driver on hp's website,...

    Jacwpent5 pointsBadges:
  • What hardware is needed for VPN

    Hi Guys, I'm hoping you can help me. I need to find out what extra hardware I will need to get to provide VPN access into my workplace. We currently have a DSL connection into a Westell 2200 Modem into a Linksys BEFW11S4 router into a Windows 2003 server with one nic. My questions are: 1) Do I need...

    Fullonjohn5 pointsBadges:
  • windows 2000 server with 2 nics, can access server but not internet

    windows 2000 server with 2 nics, can access server but not internet

    Budfox12340 pointsBadges:
  • two networks two internet conections only want too use one

    my problem is this i have my home network with a windows server 2003 runing DHCP, and providing the whole of my network with internet using two NIC cards, my next door neighbour wants too be able to access the files on my network the problem is he also has the internet and when he is conected to my...

    Wabit5 pointsBadges:
  • drives shared on 2 servers via crossover cable on secondary nic’s

    I have 2 servers, Win 2003, connected with a crossover cable to the secondary nic's - I can map to server 1 from server 2, but not server 2 to server 1. Get user restricted error, but can't find what to change, and is the problem on server 2 rights (not allowing maps to server 1), or server 1...

    Caspar5 pointsBadges:
  • VMWARE guest creation using a template

    OK I made a template and all is good, I just need to figure out how to get the deployed server from template to use a different name and not the name of the server used in the template. Sysprep I thought I read somewhere takes care of that but what exactly are the steps? Also where out there is...

    Banktech225 pointsBadges:
  • How do I check if NICs are paired?

    I've got a server (Win2K3) with 2 Nics, one enabled, one disabled. How do I check to make sure the nics aren't paried before I enable the other nic? Also, how do pair the nics if they aren't?

    Jesse.L5 pointsBadges:
  • Toshiba laptop NIC disabled?

    I wiped the hard drive and installed WinXP Pro on a Toshiba Satellite A105-S4254. All good except canNOT access office network at all. Device Manager does not show a NIC. From Toshiba's site I installed the "Toshiba Fast Ethernet LAN Adapter Driver for Windows XP/2000, but still nothing listed...

    TVMC5 pointsBadges:
  • enable and Disable networkcard in as400

    Hi, my name is Gabreil and I want to know how can I disable and enable the networkcard from my as400 V5R3 because someday may light from the company go down but I have and UPS and my iseries as400 server still up, but the network card I hope that the netwokcard are autobloqued, because the IP are...

    Ggat25 pointsBadges:
  • Can someone recommend Gigabit network cards & switch? Which ones to buy or not to buy?

    We are upgrading our network for 6 of our users to be able to utilize gigabit LAN access and our budget isn't big (about $250-$350 range for the switch). We have the Cat6 for the runs, replacing the 24-port switch, and adding NICs. I don't know what is good or bad in the small-scale gigabit world,...

    Rayhorn1365 pointsBadges:
  • Superscopes with Windows Server 2003

    Can you install a Superscope on a single network segment with only one NIC installed in the server? If you can please outline how the NIC is setup.

    KEN-OB15 pointsBadges:
  • Multiple NICs cause connectivity loss

    I have 2 NICs in a computer. They are for different subnets. If I have both of them enabled, then my primary NIC that gives me internet connectivity fails to allow me to get out or ping to the net. If I disable my 2nd NIC, then my primary NIC works fine and I can get out. I do need to have both of...

    Rameeti5 pointsBadges:
  • Teaming NICs across Multiple Switches

    The powers that be have decided they want to try to team our server NICs across multiple 4506 switches. Is this possible? For example, a server has 4 NICs, and they want 2 NICs to be connected to a 4506, and have the other 2 NICs connected to another 4506 to create redundancy and load-balancing. **...

    Ctrost0 pointsBadges:
  • R2

    does anyone know if windows server R2 is compatible with exchange 2003?

    Wolfden0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following