• Routing between two nics on the same server connected to different networks

    I have a need to route traffic from 172.16.32.0 network to 159.60.51.84 network.  I can't seem to access a website from the 159 network from the 172 network. static routing doesn't work for me. Any help would be great.

    Lzamora5 pointsBadges:
  • Limited Connectivity in a Network Enviorment

    I have been having this problem on serveral PC's. I have to setup up a new PC on our network and i am getting a limited connectivity error on the NIC card. I have checked all the setting on the PC. I tride to use another PC and i got the same error. I looked into the SP2 error and the recommended...

    Sterling0125 pointsBadges:
  • NIC Bridging on VM problem

    I have a ESXI 4.0 host with 4 nics setup for teaming (fault tolerance and load balancing). I have 2 vms setup on the host, when I setup bridging using 2 or more nics on the vm, the bridge nic shows bytes sent but 0 bytes received and the physical nics show sent bytes 0 and bytes being received. I...

    Reggies90 pointsBadges:
  • SLED 10 does not boot GRUB properly post partition expand

    I recently installed a NIC and while doing so, was not aware of the space required in my system partition, hda5, with added files. After reaching 40KB, I terminated the NIC install, and ran Gpart software to expand the partition. This was completed successfully and upon rebooting, the system...

    Datatoo5 pointsBadges:
  • NIC Bridging

    Should I use nic bridging on the vm guest that is on a single vlan if the esxi 4.0 host nics configured for teaming? Why or Why not?

    Reggies90 pointsBadges:
  • Problem bridging nics that have been teamed on ESXI 4.0

    The NIC teaming (Load Balancing) is setup on the ESXI 4.0 host, and when I attempt to setup bridging on the Windows 2003 Server VM guest, the VM stops communicating.

    Reggies90 pointsBadges:
  • Bandwidth and Connection Speed

    I have a question regarding bandwidth and connection speed. I know that bandwidth is provided by the ISP Service but I wanted to know that the does the wireless or wired NIC card in our computer uses the bandwidth provided by ISP to connect to the basestation(Router) or the connection speed between...

    Fahad135 pointsBadges:
  • Networking with two cable modems

    Hello everyone, please read and give me your comments: I have a LAN at home with two wired PC's, one wireless PC and one wireless Laptop all sharing the iinternet from a cable modem through a wireless router. I need the best speed I can get on of the wired PC's (I will call it PC1), Will I get any...

    NimBiotics50 pointsBadges:
  • Can I create high availability (HA) with switches and network interface Card (NIC) bonding?

    What's the best way to create high availability utilizing a couple of switches and NIC bonding? I'm looking at stacking four Dell PowerConnect 6248's, then bonding two NICs on my servers and having one NIC go to one switch and the other NIC to another switch. I'm assuming if the two switches my...

    NetworkingATE1,545 pointsBadges:
  • Conflict with multiple NICs

    i have 2 nics in a server : first nic 1 gb for domain with ip 192.100.100.1 second nic 100 mb connect with router with dhcp ip use for internet the 2 nics conflic together so, i stop one of them to continue working is any idea to work together ? hlp pls ?

    Army125 pointsBadges:
  • Windows XP client with two LAN cards, both wireless and local?

    hi i m danial i want to know that it is possible that windows xp working with tow lancards at a time i meant to say i have linksys accesspoint which i connect to my isp and i coonect it with my wirless lancard at a time my internal lancard connect with local sharing but problem is that when i...

    Danial370 pointsBadges:
  • Network card problem on Windows Server 2003

    I have an intel core 2 duo system intend using as an internet server. I have installed Wins server 2003 ans ISA on it, the board came with a 10/100mbps network card, now i added a 100/1000mbps network card to make the cards to be 2, but the problem is whenever i configure this cards and give then...

    Stevovo30 pointsBadges:
  • Combining 2 NICs

    what is the different between a nic 10/100 with cable cat5e and nic 10/100/1000 with cable cat5e same speed ?

    Army125 pointsBadges:
  • How can I find some AS400 Communication Utilization Statistics

    Specifically, we just installed an additional 5706 card (1gb Dual Port Network Interface) onto our Production Partition (550) to increase remote port availability. We were running out of ports (TCP100D) and it was recommended we add aditional 5706 card. The card has been added and now management...

    Gambitt7150 pointsBadges:
  • Xenserver 5 with multiple NICs

    I have 8 NIC ports available on my Xenserer host, with two ports connected to the network. However, I cannot seem to utlize the second NIC port for my Xenserver VM Windows 2003 guests. It can only use the same port that I use for the Xencenter managment console. Is there something I need to...

    Virtualadmin5 pointsBadges:
  • How do you control a vmware sever 2.0 nic from a bash cli Fedora guest?

    I'm running Fedora as a guest on a vmware 2.0 platform (Vista is the host). How do you control the vmware network interface cards from the Fedora guest bash command line, like you do with regular physical nics. Thanks!!!

    Techyo5 pointsBadges:
  • isa 2004 connectivity with ad and DNS

    Hi, I have configured isa 2004 and I have two NIC one is local and another is with public, Real IP. Unfortunately I have local domain “vsoft.com” which is registered with some one and I m using as a local domain. When I want to use AD and DNS connectivity it give error because Live ip. My AD...

    Wd7865 pointsBadges:
  • How to publish oracle application server with isa 2004

    Dear sir, We have isa server 2004 with 2 nics one connected to our lan and the second is connected to the router we want to ad a new oracle app server to our lan and be able to access this server from outside pls explain in details how to do that. thanks a lot

    Agalal5 pointsBadges:
  • Internet configuration problem with router

    i have 2 NIC on my server the 1st NIC access internet from router 2nd NIC conect local area net work but the client doesent acces internet. when i fonfigure manualy the router addres in to the clinet the internet will be functuonal but i need the client access automatical internet please help me...

    Bobmarley25 pointsBadges:
  • NIC on a office Latitude D630

    When the laptop is docked network connections work.Whenever i remove it from dock station and connects it directly to a jack, there is no network connections.

    Angora5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following