Bandwidth and Connection Speed
I have a question regarding bandwidth and connection speed. I know that bandwidth is provided by the ISP Service but I wanted to know that the does the wireless or wired NIC card in our computer uses the bandwidth provided by ISP to connect to the basestation(Router) or the connection speed...
I have a question regarding bandwidth and connection speed. I know that bandwidth is provided by the ISP Service but I wanted to know that the does the wireless or wired NIC card in our computer uses the bandwidth provided by ISP to connect to the basestation(Router) or the connection speed...
135 pts.
Wake on LAN: No light displays when the computer is in power off state
In BIOS on the Power Management Setup: I have enabled Resume on PME Enabled. Again, in NIC cards' property in the power management section: I have enabled allow this device to wake the computer and only allow management station to wake the computer. But I even don't know why there in blinking light...
In BIOS on the Power Management Setup: I have enabled Resume on PME Enabled. Again, in NIC cards' property in the power management section: I have enabled allow this device to wake the computer and only allow management station to wake the computer. But I even don't know why there in blinking light...
Active Directory problems
I am replacing two Windows 2003 Active Directory Domain Controllers that are also DNS servers, DHCP and WINS servers. They are two different sites and two different IP addresses - 10.10.10.xx and 10.10.30.xx. I have attempted to configure these two servers indentical to the two I have but I can...
I am replacing two Windows 2003 Active Directory Domain Controllers that are also DNS servers, DHCP and WINS servers. They are two different sites and two different IP addresses - 10.10.10.xx and 10.10.30.xx. I have attempted to configure these two servers indentical to the two I have but I can...
Multiple NICs
hi.. in my office i have isa server with 2 nic one is conected to dsl router with ip address of 192.168.1.1,gteway 192.168.1.254 and 2nd nic connected to switch with ip adress of 192.168.0.1,gateway 192.168.1.254 ,the client side ip range is 192.168.0.x my qustion is how 192.168.0.1 is pinging...
hi.. in my office i have isa server with 2 nic one is conected to dsl router with ip address of 192.168.1.1,gteway 192.168.1.254 and 2nd nic connected to switch with ip adress of 192.168.0.1,gateway 192.168.1.254 ,the client side ip range is 192.168.0.x my qustion is how 192.168.0.1 is pinging...
2 NIC Cards - External and Internal IP Addresses - Odd Setup
I am in the process of re-doing the configurations of a few production webservers but find myself at a loss with the following issue. There are 3 external facing webservers w/ a external IP and a internal IP as well. They are not on a DMZ. The servers should continue to function regardless of the...
I am in the process of re-doing the configurations of a few production webservers but find myself at a loss with the following issue. There are 3 external facing webservers w/ a external IP and a internal IP as well. They are not on a DMZ. The servers should continue to function regardless of the...
How to create DHCP relay agent in Windows Server 2003
how create dhcp realy agent in server 2003 with 2 nic
how create dhcp realy agent in server 2003 with 2 nic
connecting two networks to a single server (2 NIC's or router?)
I have a 2003 server box running a simple database application that needs to be accessed by users on two physically separate networks. One network is DHCP 192.x.x.x the other is static 223.x.x.x. Everyone is running XP pro. What would be the better option. Two NIC's in the server, one for each...
I have a 2003 server box running a simple database application that needs to be accessed by users on two physically separate networks. One network is DHCP 192.x.x.x the other is static 223.x.x.x. Everyone is running XP pro. What would be the better option. Two NIC's in the server, one for each...
NIC cards not working
I have a server with two NIC cards The problem I have is that the one for the LAN shows Limited or no Connectivity. I have changed the cable, the switch and I even put an external USB card to connect an external NIC, with the same result. Any suggestions
I have a server with two NIC cards The problem I have is that the one for the LAN shows Limited or no Connectivity. I have changed the cable, the switch and I even put an external USB card to connect an external NIC, with the same result. Any suggestions
Diskless Install iSCSI Remote Boot with Intel Pro 1000/PT NIC Windows 2008 Installer doesnt see LUN
Hello I have a Dell 2950 ||| and it has an Intel Pro 1000/pt Dual Port Server Adapter in it. I have configured the adapter for iSCSI remote boot, and during server startup the NIC is able to connect to my iSCSI LUN (Windows Storage Server w/ iSCSI Target Installed). When I go to install...
Hello I have a Dell 2950 ||| and it has an Intel Pro 1000/pt Dual Port Server Adapter in it. I have configured the adapter for iSCSI remote boot, and during server startup the NIC is able to connect to my iSCSI LUN (Windows Storage Server w/ iSCSI Target Installed). When I go to install...
Windows 2000 Server NICs
I added a second NIC in a new 192.168 ip range. How do I get it to talk nic 1 ( 101 ) to nic 2 (102)? I added a range entry in scope for dhcp but still not working.
I added a second NIC in a new 192.168 ip range. How do I get it to talk nic 1 ( 101 ) to nic 2 (102)? I added a range entry in scope for dhcp but still not working.
I need to add IP addresses
I use a pair of HP Procurve 2824 and a pair of 2650 switches and I think I want them to pass all data through without filtering. I also need to make my Windows 2000 Server share a wider range of IP addresses, since I've depleted my entire supply. The Server is currently via DHCP is giving out...
I use a pair of HP Procurve 2824 and a pair of 2650 switches and I think I want them to pass all data through without filtering. I also need to make my Windows 2000 Server share a wider range of IP addresses, since I've depleted my entire supply. The Server is currently via DHCP is giving out...
Problem in IBM Server X3400 NIC
Hi, Everybody i will configure ibm server x3400 there r 3 builtin NIC ports, but in the network connection properties there r only 1 NIC show, all drivers are successfully installed, no device driver problem, i am use NIC in LAN and ADSL Modem, how to configure two IP in there..... Please...........
Hi, Everybody i will configure ibm server x3400 there r 3 builtin NIC ports, but in the network connection properties there r only 1 NIC show, all drivers are successfully installed, no device driver problem, i am use NIC in LAN and ADSL Modem, how to configure two IP in there..... Please...........
How does one setup a Windows 2003 Enterprise Server on one machine with 2 nics?
I have read a book (O'Reily) on setting up windows server 2003 and at my current job I am fortunate enough to be able to work/play with their servers which are also windows 2003. In this, I have a bit of experience, however I ran into a few problems when trying to setup my own personal network at...
I have read a book (O'Reily) on setting up windows server 2003 and at my current job I am fortunate enough to be able to work/play with their servers which are also windows 2003. In this, I have a bit of experience, however I ran into a few problems when trying to setup my own personal network at...
Xenserver 5 with multiple NICs
I have 8 NIC ports available on my Xenserer host, with two ports connected to the network. However, I cannot seem to utlize the second NIC port for my Xenserver VM Windows 2003 guests. It can only use the same port that I use for the Xencenter managment console. Is there something I need to...
I have 8 NIC ports available on my Xenserer host, with two ports connected to the network. However, I cannot seem to utlize the second NIC port for my Xenserver VM Windows 2003 guests. It can only use the same port that I use for the Xencenter managment console. Is there something I need to...
Connecting 2 NICs with bridge
i want to connect one NIC with a wireless modem and second to LAN's client.
i want to connect one NIC with a wireless modem and second to LAN's client.
Dual NICs causing sync problem
I have a computer with 2 NICs each pulling an IP from a different DHCP server in order to access two different networks. The computer syncs with Retrospect on one server and only needs file access on the other. The problem is that periodically the computer cannot sync, leaving it unable to get to...
I have a computer with 2 NICs each pulling an IP from a different DHCP server in order to access two different networks. The computer syncs with Retrospect on one server and only needs file access on the other. The problem is that periodically the computer cannot sync, leaving it unable to get to...
Remote access from a public IP to a private IP with Windows Server 2003
I have a problem with my Windows Server 2003 SP1. I configured it as a router with 2 NIC (WAN and LAN) to provide internet access to our clients as an ISP, and this is working very well. My problem started when a client asked me for remote access directly from a public IP address to his private IP...
I have a problem with my Windows Server 2003 SP1. I configured it as a router with 2 NIC (WAN and LAN) to provide internet access to our clients as an ISP, and this is working very well. My problem started when a client asked me for remote access directly from a public IP address to his private IP...
Cisco Site to Site DMZ Question
Server A: 192.168.1.219 Server B: 192.168.2.220 10.10.10.10 1 gateway at 10.10.10.1 on Server B. Server A needs to connect to Server B. A can ping anything on 192.168.2.x but it cannot ping 192.168.2.220. Server B has two nic cards, hence two IP's, the internal of 192.x and the dmz...
Server A: 192.168.1.219 Server B: 192.168.2.220 10.10.10.10 1 gateway at 10.10.10.1 on Server B. Server A needs to connect to Server B. A can ping anything on 192.168.2.x but it cannot ping 192.168.2.220. Server B has two nic cards, hence two IP's, the internal of 192.x and the dmz...
NIC Does the NIC changes the binary data to analog signal or to digital signal ?
Sir , Does the NIC changes the binary data to analog signal or to digital signal ? I mean did the data traveled on cat 5 cable between two pc connectd through NIC is in Digital OR Analog signal ?
Sir , Does the NIC changes the binary data to analog signal or to digital signal ? I mean did the data traveled on cat 5 cable between two pc connectd through NIC is in Digital OR Analog signal ?
W2K Advance Server 2 nics, DHCP and DNS enabled, clients cannot connect to internet, server can
Hello, I have a W2K Advance Server using a router with the following informatipon provided, the one board NIC is conected to a router which I can connet to the internet, the clients cannot: On board NIC: Connection Specific DNS: swbell.net DCHP Enabled: Yes Autoconfiguration Enabled: Yes IP...
Hello, I have a W2K Advance Server using a router with the following informatipon provided, the one board NIC is conected to a router which I can connet to the internet, the clients cannot: On board NIC: Connection Specific DNS: swbell.net DCHP Enabled: Yes Autoconfiguration Enabled: Yes IP...
