NIC cards on Exchange Server2007
What is teh best way to configure 2 nic cards in exchange server 2007 so they have 2 different ip addresses and dont cause any issues? Software/Hardware used: NIC, Exchange 2007
What is teh best way to configure 2 nic cards in exchange server 2007 so they have 2 different ip addresses and dont cause any issues? Software/Hardware used: NIC, Exchange 2007
10180 pts.
Activating NIC after P2V Causes Blue Screen
After creating P2V using Live View, the virtual system appears to boot find. After I activate a NIC in Host-only mode, the system blue screens. How do I correct the problem? Software/Hardware used: Live View 0.6 and VMware 6.5
After creating P2V using Live View, the virtual system appears to boot find. After I activate a NIC in Host-only mode, the system blue screens. How do I correct the problem? Software/Hardware used: Live View 0.6 and VMware 6.5
Routing and Remote Access/2 NIC's
OK, running Win2K3 Server x64 Standard fully patched. RRAS/VPN was configured on primary NIC but then stopped working. We added a secondary NIC to the server just for the RRASVPN configuration and the VPN would then work properly. However, after about two months, the server couldn't resolve...
OK, running Win2K3 Server x64 Standard fully patched. RRAS/VPN was configured on primary NIC but then stopped working. We added a secondary NIC to the server just for the RRASVPN configuration and the VPN would then work properly. However, after about two months, the server couldn't resolve...
Limited Connectivity in a Network Enviorment
I have been having this problem on serveral PC's. I have to setup up a new PC on our network and i am getting a limited connectivity error on the NIC card. I have checked all the setting on the PC. I tride to use another PC and i got the same error. I looked into the SP2 error and the recommended...
I have been having this problem on serveral PC's. I have to setup up a new PC on our network and i am getting a limited connectivity error on the NIC card. I have checked all the setting on the PC. I tride to use another PC and i got the same error. I looked into the SP2 error and the recommended...
SLED 10 does not boot GRUB properly post partition expand
I recently installed a NIC and while doing so, was not aware of the space required in my system partition, hda5, with added files. After reaching 40KB, I terminated the NIC install, and ran Gpart software to expand the partition. This was completed successfully and upon rebooting, the system...
I recently installed a NIC and while doing so, was not aware of the space required in my system partition, hda5, with added files. After reaching 40KB, I terminated the NIC install, and ran Gpart software to expand the partition. This was completed successfully and upon rebooting, the system...
NIC Bridging on VM problem
I have a ESXI 4.0 host with 4 nics setup for teaming (fault tolerance and load balancing). I have 2 vms setup on the host, when I setup bridging using 2 or more nics on the vm, the bridge nic shows bytes sent but 0 bytes received and the physical nics show sent bytes 0 and bytes being received. I...
I have a ESXI 4.0 host with 4 nics setup for teaming (fault tolerance and load balancing). I have 2 vms setup on the host, when I setup bridging using 2 or more nics on the vm, the bridge nic shows bytes sent but 0 bytes received and the physical nics show sent bytes 0 and bytes being received. I...
NIC Bridging
Should I use nic bridging on the vm guest that is on a single vlan if the esxi 4.0 host nics configured for teaming? Why or Why not?
Should I use nic bridging on the vm guest that is on a single vlan if the esxi 4.0 host nics configured for teaming? Why or Why not?
Problem bridging nics that have been teamed on ESXI 4.0
The NIC teaming (Load Balancing) is setup on the ESXI 4.0 host, and when I attempt to setup bridging on the Windows 2003 Server VM guest, the VM stops communicating.
The NIC teaming (Load Balancing) is setup on the ESXI 4.0 host, and when I attempt to setup bridging on the Windows 2003 Server VM guest, the VM stops communicating.
Network card problem on Windows Server 2003
I have an intel core 2 duo system intend using as an internet server. I have installed Wins server 2003 ans ISA on it, the board came with a 10/100mbps network card, now i added a 100/1000mbps network card to make the cards to be 2, but the problem is whenever i configure this cards and give then...
I have an intel core 2 duo system intend using as an internet server. I have installed Wins server 2003 ans ISA on it, the board came with a 10/100mbps network card, now i added a 100/1000mbps network card to make the cards to be 2, but the problem is whenever i configure this cards and give then...
Combining 2 NICs
what is the different between a nic 10/100 with cable cat5e and nic 10/100/1000 with cable cat5e same speed ?
what is the different between a nic 10/100 with cable cat5e and nic 10/100/1000 with cable cat5e same speed ?
Can I create high availability (HA) with switches and network interface Card (NIC) bonding?
What's the best way to create high availability utilizing a couple of switches and NIC bonding? I'm looking at stacking four Dell PowerConnect 6248's, then bonding two NICs on my servers and having one NIC go to one switch and the other NIC to another switch. I'm assuming if the two switches my...
What's the best way to create high availability utilizing a couple of switches and NIC bonding? I'm looking at stacking four Dell PowerConnect 6248's, then bonding two NICs on my servers and having one NIC go to one switch and the other NIC to another switch. I'm assuming if the two switches my...
How can I find some AS400 Communication Utilization Statistics
Specifically, we just installed an additional 5706 card (1gb Dual Port Network Interface) onto our Production Partition (550) to increase remote port availability. We were running out of ports (TCP100D) and it was recommended we add aditional 5706 card. The card has been added and now management...
Specifically, we just installed an additional 5706 card (1gb Dual Port Network Interface) onto our Production Partition (550) to increase remote port availability. We were running out of ports (TCP100D) and it was recommended we add aditional 5706 card. The card has been added and now management...
Conflict with multiple NICs
i have 2 nics in a server : first nic 1 gb for domain with ip 192.100.100.1 second nic 100 mb connect with router with dhcp ip use for internet the 2 nics conflic together so, i stop one of them to continue working is any idea to work together ? hlp pls ?
i have 2 nics in a server : first nic 1 gb for domain with ip 192.100.100.1 second nic 100 mb connect with router with dhcp ip use for internet the 2 nics conflic together so, i stop one of them to continue working is any idea to work together ? hlp pls ?
Gigabit Ethernet only connecting at 100mb
Have a Gigabyte GAIp1000 pro board running latest Intel Pro 1000 driver. Added new nic neither will connect at 1000 ony 100 mb on seperate switch any ideas?
Have a Gigabyte GAIp1000 pro board running latest Intel Pro 1000 driver. Added new nic neither will connect at 1000 ony 100 mb on seperate switch any ideas?
isa 2004 connectivity with ad and DNS
Hi, I have configured isa 2004 and I have two NIC one is local and another is with public, Real IP. Unfortunately I have local domain “vsoft.com” which is registered with some one and I m using as a local domain. When I want to use AD and DNS connectivity it give error because Live ip. My AD...
Hi, I have configured isa 2004 and I have two NIC one is local and another is with public, Real IP. Unfortunately I have local domain “vsoft.com” which is registered with some one and I m using as a local domain. When I want to use AD and DNS connectivity it give error because Live ip. My AD...
How to publish oracle application server with isa 2004
Dear sir, We have isa server 2004 with 2 nics one connected to our lan and the second is connected to the router we want to ad a new oracle app server to our lan and be able to access this server from outside pls explain in details how to do that. thanks a lot
Dear sir, We have isa server 2004 with 2 nics one connected to our lan and the second is connected to the router we want to ad a new oracle app server to our lan and be able to access this server from outside pls explain in details how to do that. thanks a lot
NIC on a office Latitude D630
When the laptop is docked network connections work.Whenever i remove it from dock station and connects it directly to a jack, there is no network connections.
When the laptop is docked network connections work.Whenever i remove it from dock station and connects it directly to a jack, there is no network connections.
Data flow for 1 PC w/ 2 NICs
From a testing perspective, if a PC has 2 NIC's, each configured for a different subnet, does traffic actually cross the LAN since each unique MAC is represented by a unique IP according to its ARP cache? Would not the destination network need to be resolved by a router? I guess a better question...
From a testing perspective, if a PC has 2 NIC's, each configured for a different subnet, does traffic actually cross the LAN since each unique MAC is represented by a unique IP according to its ARP cache? Would not the destination network need to be resolved by a router? I guess a better question...
ISA 2004 server installation
Hi, I am planinig to install isa 2004 server in my DC.[win 2003 server ] But My DC is configured to single ehernet card. Should i install 2nd N/W card to boost ISA 2004 Performence or a Single Card will do. We are not planning for Hardware Firewall in near future. Thanks alot Badri
Answer Question
| Mar 6 2009 7:15 AM GMT
ISA 2004 installation, Windows Server 2003, Domain Controller
Hi, I am planinig to install isa 2004 server in my DC.[win 2003 server ] But My DC is configured to single ehernet card. Should i install 2nd N/W card to boost ISA 2004 Performence or a Single Card will do. We are not planning for Hardware Firewall in near future. Thanks alot Badri
Answer Question
| Mar 6 2009 7:15 AM GMTISA 2004 installation, Windows Server 2003, Domain Controller
