• Configuring VLANs on NetGear FS726T Switch

    I am not a trained network specialist, but I'm installing a network at our church. We have a NetGear FS726T switch and a WG102 access point. We want to have to two VLANs: one to be used by the staff with full access to all of the devices on the network and to the Internet; and the other to be used...

    Krused135 pointsBadges:
  • Port monitoring with HP ProCurve 4104GL

    Having problems configuring a Web filter with a HP ProCurve 4104GL switch. Does this switch support port monitoring? Thanks. Moderator Note: This is a submitted question

    BrentSheets6,925 pointsBadges:
  • DHCP Server provides Wrong Subnet

    Our company had a hub and spoke network for years, a single server room supporting 20 remote locations, most using the Citrix farm.  We grew and started a second server room.  At the second location we have a switch stack of 9 Cisco 3750 10/100 switchws setup with 5 VLANS.  previously IP...

    D50041115 pointsBadges:
  • What layer of the TCP/IP would ARP and RARP belong to

    ARP translates Layer 3 addresses to Layer 2 addresses, and knowing fully well that it is not an IP-only or Ethernet-only protocol. Can anyone help with this, it's getting a bit confusing.

    Freshfall5 pointsBadges:
  • Cisco 3500 Switch How to configure

    I've been given a Cisco 3500 XL Switch. Question is what can i do with it? I was hoping to split the ports into VLAN's for a start preparing for CCNA exams. Up to now I've mainly done book work. I want to get my 'hands dirty'. Is this a manageble switch ...? - i dont know. I've tried Consoling into...

    Pelvicthrust170 pointsBadges:
  • What layer of the OSI model does a switch operate?

    At what layer of the OSI model does a switch operate?

    NetworkingATE1,545 pointsBadges:
  • How to connect multiple subnets using RV042 router

    Hi all, I'm trying to figure out a way to get multiple subnets to communicate. Here's the scenario: 2 subnets - 192.168.101.x and 192.168.104.x 1. Router - Linksys RV042. WAN 1 port to internet, LAN port to internal network. Default Gateway with IP of The WAN2/DMZ port is not being...

    Lordhowe175 pointsBadges:
  • Zebra ZM400 network configuration

    How do change the printers name and IP address from the printers LCD?

    JDamage5 pointsBadges:
  • Trying to detect 3G or Wi-Fi network connection on Android

    Does anyone know if its possible to implement a "PhotoStateListener" to see if the 3G or Wi-Fi network connection has been restored on my Android? I'm currently seeing both LISTEN_DATA_CONNECTION_STATE and LISTEN_DATA_ACTIVITY say cellular in the API summary. Does that mean 3G only? Thanks!

    ITKE372,395 pointsBadges:
  • What’s the best option for network disconnections in software?

    I'm working with a network C++ program in Microsoft Windows that I'm trying to test for network disconnections at various times. Here's what I'm doing so far: Manually disconnecting the network wire Using IPCONFIG / release Using a cports program to close the socket What other options are out there...

    ITKE372,395 pointsBadges:
  • The Partner transaction manager has disabled it support for remote/network transaction (Exception from HRESULT : 0x8004D025)

    Hello.....Every one I have a question that I get the following exception when I connect my application to the remote database and there is no exception when I connect my application to the local database. What is the problem? I also have searched my problem on the Internet and I have found many...

    Ghulamsiddiq5 pointsBadges:
  • Can I use a bash shell to find my IP address?

    Once in a while, I need to start a Django development server for work and have it viewable by several other machines in our network. My machine's IP address sometimes changes every now and then so I'm looking to have a little shell alias or something that spits out the "manage.py" command with my...

    ITKE372,395 pointsBadges:
  • ISO model troubleshooting

    What steps do I take if I cannot download a file from the internet?

    wes1015 pointsBadges:
  • How much faster is UDP than TCP?

    How much faster is UDP than TCP for a general protocol message exchange?

    ITKE372,395 pointsBadges:
  • Can data using a loopback be packet sniffed?

    Does anyone if data that's exchanged on a local machine using a loopback IP be packet sniffed if the PC is connected to a network? I'm trying to figure out the loopback is secure enough for exchanging data. We're using these different platforms: Windows Vista, Windows 7, Mac OS X and...

    ITKE372,395 pointsBadges:
  • Setting a network status alarm in Windows 7

    Whenever I'm using Windows 7 and I lose my Internet access, the network indicator turns yellow. Now I want to get the status in my software / set an alarm whenever I lose my connection. Is this possible? Can I get this status?

    ITKE372,395 pointsBadges:
  • What does flushing a socket mean?

    From a networking standpoint, I have some knowledge about socket selectors but I'm still have difficultly in understanding why you need to flush a socket. What does that actually mean? Do the bits remain in memory until they get pushed off? Can anybody tell me what's really going with flushing...

    ITKE372,395 pointsBadges:
  • Is IP Address filtering really secure?

    We're planning to deploy an internal application with a ton of sensitive data and we're becoming very worried security wise. I suggested to keep it on our internal network but I was vetoed. Inside of the app, we programmed it to only respect requests if they come from an internal IP address...

    ITKE372,395 pointsBadges:
  • website download issues

    I have a uk based network which is having issues downloading content from websites based in USA, but can download content from the UK without issues. Different browsers/pcs also have the same issues.We can ping and resolve the website addresses for any sites. The site was working for several years...

    it4offices15 pointsBadges:
  • Configuring CYGWIN to use Windows Proxy infomation

    Hello, I'm using Internet Explorer and I need to figure out how to use CYGWIN for several quick scripting tasks. How would I go about configuring it to my Windows Proxy info? I have several things trying to make direct connections (pings, ruby gems, etc.) How can I get them to respect the proxy...

    ITKE372,395 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.