• HP Laserjet printer problem

    When I login with administrator, the printer is working fine but when I login with the domain user (Active Directory user), it does not print. I have a HP Laserjet 1018 USB local printer and the computer in which the printer is attached is XP and my domain controller is Windows Server 2008. Please...

    PRITHVIRAJBAFILA50 pointsBadges:
  • Modify configuration for port security

    Dear All, Presently we have configured port security as below switchport mode access switchport port-security switchport port-security violation restrict switchport port-security mac-address sticky switchport port-security mac-address sticky 000a Now we need to modify the above configuration to...

    Vptechie70 pointsBadges:
  • How to configure two Cisco 2600 routers

    Hi, we have two Cisco 2600 routers, one deployed in our main office and the other in our remote site. We also have two DSL connections. We have our Exchange server in main office. Q1. How to configure the two router to use the 2 DSL connections that we have? Q2. How to route our exchange server to...

    Killerj5 pointsBadges:
  • Configure and deploy network with Cisco 2600 router

    I've tried configuring a router for a network with 98 hosts. I'm using Network Visualiser 4.0 by Routersim. But I'm not getting it done at all. Is there any other means, methods, techniques in configuring routers for such office building network. Or any suggestions on how to configure and deploy...

    LESHTEK5 pointsBadges:
  • Difference between HP OpenView & Neverfail

    Please let me know the difference between HP Open View (Monitoring Tool) & Neverfail (Business Continuity Management Software). How are they different from each other?

    rumanasajid198015 pointsBadges:
  • Exposure on the Internet

    How can I remove myself from being found on the Internet? I have followed all procedures but my name can still be queried.

    weglowde40 pointsBadges:
  • Career change for my life

    Hello to all and to all a hello. I am looking for everyone's opinions and knowledge. So please fill free to feed me your opinions and knowledge. First off I have a degree as a network Engineer and a degree in MIS. I of coarse have my MCSE and MY CNA Net + and etc. I have been involved in networking...

    Dgriggs0 pointsBadges:
  • VPN for static IP addresses

    I have static IP addresses. Do I need third party software to set up VPN.

    Wstapp5 pointsBadges:
  • Undeliverable: Delivery Status Notification (Failure) message

    Your message did not reach some or all of the intended recipients. The following recipient(s) could not be reached: You do not have permission to send to this recipient. For assistance, contact your system administrator. Client host rejected: Please use your ISP's SMTP relay! ANR00255> Thanks-

    Djnyc19680 pointsBadges:
  • Exchange 2003 logon sessions

    Why does exchange server 2003 create so many logon sessions? When you open the ESM and navigate to Administrative Group->Servers->Server->First Storage Group->Mailbox Store->Logons. Some users have as many as fifteen sessions, why? I also get the following error in the application...

    Bpirro5 pointsBadges:
  • Linksys EA6500 help

    Hello, I have recently upgraded my old Linksys router, for a brand new Linksys EA6500 router. I have a fairly large home and many devices needing to be supported. I have the highest speed modem that my internet provider offers to be compatible with my new router. I would not consider myself to be...

    joebin5 pointsBadges:
  • Windows 2012 DHCP issue

    I had migrated from Windows 2008 server to Windows 2012 server recently. Windows 2008 server was the DHCP server and I transferred the same to new 2012 server. But 2012 server was not leasing the IP's. I then noticed the events like 1046 and 1056 in 2012 server and gave DNS credentials commands. I...

    kunelluvai5 pointsBadges:
  • Panasonic DP-8020E scanner not working

    I have a Panasonic DP-8020E that is set up as a network printer/scanner and all the PCs (running XP) can print to it but the scanner will no longer send scans to the PCs. I only get a generic message “an error occurred in the transfer.” We do not scan very often so we don’t know when...

    Teicneoir220 pointsBadges:
  • Windows 7 is slow at Boot time, LAN takes more time

    Hi, My Windows 7 clients in a domain takes more time to boot. The LAN keeps loading at the boot time. If I try to do anything when the LAN gets loaded they system gets hanged. Regards, Prabu

    prabup55 pointsBadges:
  • How to set SCTP init message?

    Hello group members, I have a problem: when we send SCTP init message from client to server using connect() api, then the look like this: Stream Control Transmission Protocol, Src Port: sua (14001), Dst Port........ ............ INIT chunk (Outbound streams: 2, inbound streams: 2) ->Chunk type:...

    sctp5 pointsBadges:
  • ISA Server 2004 user bandwidth

    How can I manage bandwidth on user basis or machine basis. I want to limit user a to download not more than 50 MB per day and user b 10 mb per day. Also I want to impose connectivity restriction i.e. 10Kbps per user out of 1 Mbps of my bandwidth.

    Maqusman20 pointsBadges:
  • Have only one NIC on my server 2008 but shows that I have more than one active connections

    Hi, I have only one NIC card on my server 2008, it is not connected with the internet, when I try to resolve it shows that there are more than one active connections on my computer. I checked in "Manage Network Connections" there was only only connection. Regards, Prabu

    prabup55 pointsBadges:
  • ORA-12535 error on Oracle 9i

    My database runs on 9i. There are remote databases that connected to it. Today all of them are failing to connect because of the error message ora-12535. I increased the CONNECT_TIMEOUT but error still persists. I even set it to zero (0) and the system hangs indefinitely.tnsping to these remote...

    SINETA0 pointsBadges:
  • What do you think of Cisco’s open platform strategy?

    "Our value proposition from Cisco is to provide a platform with APIs [application programming interfaces] that [partners] can then [use to] create and customize services for our customers." This is the message from Cisco's technology and strategy officer Padmasree Warrior during the company's 17th...

    Michael Tidmarsh34,010 pointsBadges:
  • Server 2008 has no Internet access

    Hi, I have a Windows Server 2008 which is acting as the only DNS and DC in my network. But the server is not connected to the internet. So that I'm using the public DNS servers in all the client machines. Servers TCP/IP: IP:192.168.x.2 subnet: 255.255.255.0 Gateway: 192.168.x.1(The IP address of...

    prabup55 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following