Hi Ravikanth, Nice to know, that you said frankly about your 1 year you are free. No problem , SAP is better for you, coming to suitable module for you is SAP BI, SAP BASIS, SAP ABAP(programing). what ever it may be you should to show 3 yrs exp. all the best
Hi Kevin, actually you can even just get a normal PC to do file / folder sharing. it will be much cheaper than getting a server. but you do have to take note that you will need to do some backup towards the files inside the pc, unless you use RAID 1, 5 or etc…. [...]
Remove the DNS settings from the public IP nic.
I’ll refer you to the Cisco website, specifically the <a href=”http://www.cisco.com/en/US/products/ps10265/index.html”>Unified Computing</a> section.
You can create the VLANs 10 and 40 on the 3Com if you like, but if you aren’t going to have clients in 10 and 40. Make sure they are both using the same vlan protocol. i.e. 802.1q. Then check if the trunk ports allow those VLANs.
You won’t be able to turn your laptop into a wireless repeater. The best thing to do is to buy a repeater. All it needs is a power plug somewhere with decent reception and the initial configuration.
You can mount NFS folders on the SCO box and copy files to that share. Otherwise, FTP would need some configuration in apache.
No, there is no difference. Terms that are used widely for WANs are the service names like MPLS, Frame Relay, or VPN. WAN encompasses all those technologies.
As stated in the answer to your original post – modern NOS’s are multi-threaded. I don’t understand what you are really asking
All current NOS will mult- thread. Can’t think of one that doesn’t. If you find one avoid it
On your core switch, you will enter a command identical to: (DMZ IP SUBNET DESTINATION INTERFACE IP) ip route 10.254.254.0 255.255.255.0 172.16.100.1
If it’s grayed out, it would probably mean it does not know of any other authorized DHCP Server 2008-based. Preparing another server and authorize this server and then attempt again.
Well, this is the whole point of the design project. Don’t forget to keep up with the subnetting as you go. You should research each piece of equipment you want to use, as this project is designed to test your equipment knowledge and reasoning behind your use of the equipment, all devices have strengths and [...]
The USB modem is not an automatic connection (by default). Meaning that it’s a manual process to launch a program to utilize the usb modem unlike the local area connection. So to answer your question, it will not override the lan connection (by default).
more experience + more certification = more salary but i cant say which how much as I don’t know your market. So you got to do some research on your market and do the math..
Can I ask, what firewall are you using? Do you allow your IE to go on to the internet? If you don’t allow your IE to go on the internet there is no way that you can access the internet. Another thing is that IE uses port 80 to go to the net. and if [...]
since you tell us that the modem works fine when connected directly..lets try this approach make sure the physical connection is correct thats the first thing (assuming its all pluggin into the right ports) then try to access the firmware, since you try to set the connection on bridge mode did you put the router [...]
I would say to be honest its a question of budget. In an ideal world you would have resilient dedicated primary and backup hardware for all services / tasks. It also depends on the size of your estate and how many users it supports. If for instance you take a DHCP server as an example, [...]
I guess you can start by telling us what type of laptop you are using..
What type of connection do you have from your central office to each of your branches and vice versa? ATM PVCs / Frame-Relay / MPLS VPN / IPSec VPN over the internet or leased lines to name a few? One way to achieve redundancy is to introduce a second WAN connection to a second router [...]





