I am making an assumption here, as you have not put in your exact config, that the subnet mask for your LAN segment is a /24 (255.255.255.0). Be aware that you cannot NAT to port 80 on the IP address 192.168.0.0 as it is the network address and as such unusable as a host address. [...]
View Answer | June 22, 2010 11:49 AM
Cisco 878, Cisco Routers, Network Configuration, Port forwarding, Routers
I have seen this type of behaviour before. Updating router firmware can help but sadly it can also be a sign of failing hardware.
View Answer | June 22, 2010 11:22 AM
Wireless, wireless adapter, Wireless router interference, Wireless routers
You cannot do it with the equipment you have.
View Answer | June 22, 2010 10:59 AM
Home networking, Linksys Routers, Network Configuration, Routers, routers and switches, WAN
Are you able to ping 172.19.35.75 from 172.19.3.22 – i.e., do you have a route between VLANs? If yes, then just “ssh 172.19.35.75″ from 172.19.3.22 – anyway, you are not connecting to an interface (eth0, eth1) – but to a host (B) through any of its interfaces. If not – set up a route between [...]
View Answer | June 21, 2010 8:48 PM
Cisco Routers, Cisco switches, Cisco VLAN, Network Configuration, Routers, SSH
If you use “ip unnumbered fas0/0″ on your serial interface and your fas0/0 interface goes down then any packets destined for the that IP address will not be processed and OSPF will drop. The packets are not processed by the interface per say, they arrive on the interface and then they are actually processed by [...]
View Answer | June 21, 2010 6:38 PM
CCIE, Cisco IOS, Cisco IOS Commands, OSPF
The DELETE command should take just 1 argument: the name of the remote file to delete. If it is not the case in your environment, you might want to provide more details about the local and remote systems.
View Answer | June 21, 2010 1:58 PM
FTP, FTP Error Codes
It certainly could be. VIruses can replicate using email from an infected client.
View Answer | June 21, 2010 12:33 PM
SMTP, SMTP Errors, TCP
Assuming that each site as a DSL line or cable modem… Get each site a <a href=”http://www.google.com/products/catalog?hl=&q=linksys+vpn+router&rlz=1B3GGLL_enUS358US358&um=1&ie=UTF-8&cid=7589159761057610975&ei=d3keTJXyM8rtnQeBmpjnAw&sa=X&oi=product_catalog_result&ct=result&resnum=2&ved=0CC4Q8wIwAQ#”>LinkSys RV042</a>. These are nice little routers which would replace the existing routers at each site. These routers are nice because they support site to site VPN connections. Each office is its own TCP subnet, and the routers are [...]
View Answer | June 20, 2010 8:34 PM
Application Server, Email Server, Network design
HSRP is not really designed to be used in an active active configuration. The true purpose of the protocol is to provide redundancy not load balancing. Multiple HSRP groups do provide load balancing but to be honest its quite crude. I would look at GLBP instead which is very similar in configuration and can be [...]
View Answer | June 19, 2010 11:02 AM
CCNP, Cisco Certified Network Professional, Cisco Routers, HSRP, MPLS, Redundant Switches, Routers
<pre> net use [* | letter:] \servershare /U:DOMAINusername [* | password] </pre> I recommend that such mappings not be persistent so add a /P:NO to the command. Check folder and share permissions for the user. Ensure that TCP ports 139 and 445 are open for the VPN and properly routed.
View Answer | June 18, 2010 4:47 PM
Command Prompt window, Domain management, Network Drive Mapping, Network management, Server management
There are lots of reason why IOS will shutdown an interface but basically it is due to the software detecting an error condition. It could be that a cable is out of specification (either too long, the wrong type, or defective). Alternatively it could also be software (misconfiguration) related such as: Duplex mismatch Port channel [...]
View Answer | June 18, 2010 2:22 PM
Cisco 3560, Cisco switches, Port monitoring, Switches
Depends on OS and also speed but generally, and in my opinion, although I expect the discussion board will have some other thoughts………… Best – 3Com, Intel, DEC. Worst – Realtek.
View Answer | June 17, 2010 4:52 PM
Network hardware, Network Interface Cards, NIC, NIC Problem
Probably the easiest way to do and manage would be to use Group Policy. 1) Create 4 AD Groups – Group_Room_A_Users, Group_Room_B_Users, Group_Room_A_Workstations, and Group_Room_B_Workstations.. 2) Add all users to Group_Room_B and those users with limited access to Group_Room_A. 3) Add room B workstations to Group_Room_B_Workstations and add room A workstations to Group_Room_A_Workstations. 4) Create [...]
View Answer | June 17, 2010 3:33 PM
Domain, Network Access Control, User access, Windows XP, Workstations
I am not sure what you mean by reset your network or recognizing your router. Equally I do not know if you are wired or wireless or how they connect. I will assume it might be a mixture of both and your DHCP server is the router. Given that, can you try a couple of [...]
View Answer | June 17, 2010 2:31 PM
Linksys WRT54G, Network connectivity, Network management, Router configuration, Routers, Windows Vista
Approach TATA. They have a lot of positions for graduates and skilled workers.
View Answer | June 17, 2010 1:12 PM
CCNA Certification, Networking careers, RHCE
So……you can connect to your VPN server and access you corporate network services but not the internet and then you disconnect from your VPN server and can access the internet but not the corporate network services. I hop that is the correct surmise…… :S Your issue sounds like your VPN server is sending you a [...]
View Answer | June 17, 2010 1:11 PM
Domino error messages, Lotus Domino, VPN, VPN connectivity
Are you having trouble connecting to the SIP server? Do you have a connection to the internet? Please can you re-word the question a little clearer and repost? Many thanks!!
View Answer | December 1, 2012 12:57 PM
Linksys, Server Connection Failed
You can!! Just make sure that you enable extended auth for remote access users but disable it for your pre shared keys already in use on your site to site tunnel(s). Here is a great example of what you are trying to do: <a href=”http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094685.shtml”>Configuring IPsec Between Two Routers and a Cisco VPN Client</a>
View Answer | June 17, 2010 12:55 PM
Cisco 2811, Cisco Routers, Cisco VPN, Routers, VPN design
Internet Explorer 7 or 8 work well. I’ve also used Firefox.
View Answer | June 17, 2010 7:17 AM
Application Compatibility, Cisco, Cisco Partner Tools, lenovo, Web browsers
If you are getting DNS lookup errors then your DNS server can’t find the IP address of the site you are looking for, for some reason. Either the DNS server that host’s the DNS for that site is down, there is a network problem, or the cache files for your DNS server have become corrupt, [...]
View Answer | June 17, 2010 1:52 AM
Browser security, DNS, Windows Vista