• Wireless LAN Logical design

    • Three main groups: Sales, Production and Engineering. Each group has 60 users in each group. • The standard network card is a Cisco Aironet 350, and the access point selected is a Cisco Aironet 1200. • The Sales and Production departments should not be able to access the Web server on any...

    Jonigooner115 pointsBadges:
  • Cat 6 crossover only getting 100 Mbps?

    So I'm trying to make a 1000 Mbps connection between two machines with gigabit ethernet ports. Problem is, even with cat 6 cable, my transfer rate is peaking at 12.8 MB/s (should peak at 128, yes?). It says in the connection status on both ends that the speed is 100 Mbps. Is there something I need...

    Flibitijibibo15 pointsBadges:
  • Gigabite switch compatibility

    What is the process in iSeries server to know whether my current LAN card will support the Gigabite switch?

    A550 pointsBadges:
  • No Connection to Mail Server

    I have a subnet (192.168.12.0) that for some reason the workstations cannot access the mail server (located on the dmz) to retrieve or send mail. The workstations can get internet and any other services but not mail. I have checked the firewall but no changes have been made on the access list. I...

    Jdleon85 pointsBadges:
  • Recommendation for Layer 3 switch and firewall

    Our school division is made up of seven schools. All schools point back to the central office location where all Internet traffic comes through. I have to setup subnets and VLANS at each school. Can you recommend a make/model of layer 3 switches for each school and for the main central office...

    Skenny175 pointsBadges:
  • How to add an Additional Domain controller in an existing environment and promote it as Domain Controller

    Our environment contains two domain controllers with windows 2003 as O/S with the ip 10.0.2.12/8 and 10.0.2.13/8. Due to old hardware we want to install our domain controllers on new hardware with different IP as 192.168.15.1/24 and 192.168.15.2/24. Please provide me the steps to install the...

    Biabani5 pointsBadges:
  • Windows Server 2003 forced to DHCP

    Does anyone know a way to force a workstation to use a specific DHCP server ? We have a windows server 2003 has DHCP active as well as our phone system. The problem is there are workstations getting there ip info from the phone system and not the server.

    ITKE347,940 pointsBadges:
  • Adding VPN pass through a SOHO router

    What should I do if I need to add VPN pass through function to a SOHO router?

    ITKE347,940 pointsBadges:
  • identifying cause of unexplained network traffic

    Our organization's firewall has been reporting some curious network activity coming from a few specific computers on our network.  The source always comes from the same dozen or so computers on our network, and the destination is always the same computer on the domain.  And it always follows the...

    Frugal15 pointsBadges:
  • Not receiving external emails after router replacement

    I have taken over some client remotely while a fellow business owner is on vacation. I am not able to view the problems first hand because his client base is on the east coast and I am on the west. The customer called and their router went down...i.e. I can't remote in and easily fix any problem....

    Mist5735 pointsBadges:
  • certficate problem on Backup Domain Controller

    Hi I removed First domain controller certificate then created new certificate. Then i installed new certificate to backup domain controller. Once the problem resolved. A little bit later the problem return again I thing that reason is certificate. The error like this: [strong]The currently selected...

    Eliyevelxan1,235 pointsBadges:
  • Network reconfiguration

    I am changing our network from a flat network (LANSPAN) to a network with subnets and VPN's. Currently there is just one router at a central location that the other 7 schools point back to for Internet access. The 7 locations all make up one domain that link back to this central location. What is...

    Skenny175 pointsBadges:
  • VLAN routing Cisco 2960

    I have 2 VLAN  VLAN and VLAN2  in a 2960 cisco switch .I need to route betwwen VLANS .Here is my question  can I use a AASTARO firewall to route this ? or do I need cisco router? VLAN protocol is 802.1q Thanks

    sumeshbnr1,675 pointsBadges:
  • Wireless Router, Access Point and Switch

    Hello All, I am having a problem setting up an Access Point. Here is my configuration. I have a Comcast Cable Modem that plugs in to a 24 port Netgear Switch. From the switch it plugs into the Linksys N wireless router with an IP of 10.1.10.76. I don't know the linksys model. But it is fairly new....

    Knuckles10 pointsBadges:
  • Rj45

    Hi! I have got a Huawei pocket WiFi router which can connect 5 pcs at a time through Wifi. It doesn't have a USB port. I want to connect a desktop pc which is at the top floor of my home through RJ 45 cable as it can't receive full signal strength from the pocket WiFi router kept at the ground...

    abcdef5610 pointsBadges:
  • 802.11ac spec is not ready yet?

    I am looking at 802.11ac routers, and I read this from Qualcomm: http://qca.qualcomm.com/thewire/qualcomm-atheros-bringing-forth-a-new-paradigm-for-11ac/ What caught my eye is that they were talking about the 802.11n launch, and the upcoming 802.11ac products, “As a result, this rush to market...

    stjohn0la10 pointsBadges:
  • Remote Desktop Gateway Virtual Desktop vs Terminal Services

    http://searchvirtualdesktop.techtarget.com/tip/0,289483,sid194_gci1370035,00.html?ShortReg=1&mboxConv=searchVirtualDesktop_RegActivate_Submit& In reference to the above article I would like some clarification 1) Remote Desktop Gateway - I am assuming this is not an essential requirement for...

    Arlesterc35 pointsBadges:
  • Setup VPN from work to Home

    Hello Everyone, My VP of the company wants to setup a VPN. He wants to be able to take Iomega 150d NAS drive home it has it own ip address and be able to do the backups at home off site to the Iomega 150d, but the server is at work. We have 2 netgear pro safe 24 port switches/ 1 netgear pro safe...

    Mdallen705 pointsBadges:
  • ADS configuration in different subnets

    I have one network running in 192.168.1.0/24, ADS in 2000server and exchange in 2003 on a member server also have FTP and file servers .I want to setup a different subnet and move 50 clients from the existing NW. and to use the same Servers in the existing NW .I have done the following things and I...

    sumeshbnr1,675 pointsBadges:
  • Wireless router on different Subnet

    Here's what I've got. 2 internet connections router 1: 192.168.10.1 router 2: 192.168.11.1 bothe connect to a load balancer at 192.168.254.254 SBS server acting as DHCP on the 192.168.254.X scope router 1 is a wireless router (netgear WGR614v9) When i try and connect to the wireless, i cant get an...

    Markikona5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following