• Windows Server 2003 forced to DHCP

    Does anyone know a way to force a workstation to use a specific DHCP server ? We have a windows server 2003 has DHCP active as well as our phone system. The problem is there are workstations getting there ip info from the phone system and not the server.

    ITKE345,330 pointsBadges:
  • Adding VPN pass through a SOHO router

    What should I do if I need to add VPN pass through function to a SOHO router?

    ITKE345,330 pointsBadges:
  • identifying cause of unexplained network traffic

    Our organization's firewall has been reporting some curious network activity coming from a few specific computers on our network.  The source always comes from the same dozen or so computers on our network, and the destination is always the same computer on the domain.  And it always follows the...

    Frugal15 pointsBadges:
  • Not receiving external emails after router replacement

    I have taken over some client remotely while a fellow business owner is on vacation. I am not able to view the problems first hand because his client base is on the east coast and I am on the west. The customer called and their router went down...i.e. I can't remote in and easily fix any problem....

    Mist5735 pointsBadges:
  • certficate problem on Backup Domain Controller

    Hi I removed First domain controller certificate then created new certificate. Then i installed new certificate to backup domain controller. Once the problem resolved. A little bit later the problem return again I thing that reason is certificate. The error like this: [strong]The currently selected...

    Eliyevelxan1,235 pointsBadges:
  • Network reconfiguration

    I am changing our network from a flat network (LANSPAN) to a network with subnets and VPN's. Currently there is just one router at a central location that the other 7 schools point back to for Internet access. The 7 locations all make up one domain that link back to this central location. What is...

    Skenny175 pointsBadges:
  • VLAN routing Cisco 2960

    I have 2 VLAN  VLAN and VLAN2  in a 2960 cisco switch .I need to route betwwen VLANS .Here is my question  can I use a AASTARO firewall to route this ? or do I need cisco router? VLAN protocol is 802.1q Thanks

    sumeshbnr1,675 pointsBadges:
  • Wireless Router, Access Point and Switch

    Hello All, I am having a problem setting up an Access Point. Here is my configuration. I have a Comcast Cable Modem that plugs in to a 24 port Netgear Switch. From the switch it plugs into the Linksys N wireless router with an IP of 10.1.10.76. I don't know the linksys model. But it is fairly new....

    Knuckles10 pointsBadges:
  • Rj45

    Hi! I have got a Huawei pocket WiFi router which can connect 5 pcs at a time through Wifi. It doesn't have a USB port. I want to connect a desktop pc which is at the top floor of my home through RJ 45 cable as it can't receive full signal strength from the pocket WiFi router kept at the ground...

    abcdef5610 pointsBadges:
  • 802.11ac spec is not ready yet?

    I am looking at 802.11ac routers, and I read this from Qualcomm: http://qca.qualcomm.com/thewire/qualcomm-atheros-bringing-forth-a-new-paradigm-for-11ac/ What caught my eye is that they were talking about the 802.11n launch, and the upcoming 802.11ac products, “As a result, this rush to market...

    stjohn0la10 pointsBadges:
  • Remote Desktop Gateway Virtual Desktop vs Terminal Services

    http://searchvirtualdesktop.techtarget.com/tip/0,289483,sid194_gci1370035,00.html?ShortReg=1&mboxConv=searchVirtualDesktop_RegActivate_Submit& In reference to the above article I would like some clarification 1) Remote Desktop Gateway - I am assuming this is not an essential requirement for...

    Arlesterc35 pointsBadges:
  • Setup VPN from work to Home

    Hello Everyone, My VP of the company wants to setup a VPN. He wants to be able to take Iomega 150d NAS drive home it has it own ip address and be able to do the backups at home off site to the Iomega 150d, but the server is at work. We have 2 netgear pro safe 24 port switches/ 1 netgear pro safe...

    Mdallen705 pointsBadges:
  • ADS configuration in different subnets

    I have one network running in 192.168.1.0/24, ADS in 2000server and exchange in 2003 on a member server also have FTP and file servers .I want to setup a different subnet and move 50 clients from the existing NW. and to use the same Servers in the existing NW .I have done the following things and I...

    sumeshbnr1,675 pointsBadges:
  • Wireless router on different Subnet

    Here's what I've got. 2 internet connections router 1: 192.168.10.1 router 2: 192.168.11.1 bothe connect to a load balancer at 192.168.254.254 SBS server acting as DHCP on the 192.168.254.X scope router 1 is a wireless router (netgear WGR614v9) When i try and connect to the wireless, i cant get an...

    Markikona5 pointsBadges:
  • Migration of website to Data Center

    Please kindly assist me with a plan or guide on migrating our websites being hosted outside my company by an ISP to our data center.

    oluwaseyiokunniyi10 pointsBadges:
  • mounting an AS/400 shared folder to linux

    I am trying to find how to mount an i-series shared folder to my linux machine. I would ideally like to be able to use the cpy command on the i-series to copy files directly to the linux shared folder (it is currently shared on a windows machine). I have a program which selects the documents based...

    bstars25 pointsBadges:
  • set up a secure workgroup on a shared internet connection

    I have a customer with about ten computers running a mixture of windows xp, vista and 7, they share files and printers by using a workgroup network and have recently moved into a new office in a large building which shares internet access with other un-connected businesses via network sockets which...

    computertony5 pointsBadges:
  • MPLS, ATM, Frame Relay and IPLC

    QUESTION ASKED ON BEHALF OF A WHATIS.COM READER: Am learning about MPLS, ATM, Frame Relay and IPLC and am a little lost in understanding how these technologies fit in with the telephone network -- my question is: Can these technologies be provided to clients without the introduction of additional...

    Margaret Rouse1,740 pointsBadges:
  • How to use UNC paths?

    How to use UNC paths?

    rsaahi0115 pointsBadges:
  • MS Exchange 2003 API / OLDAP question – How to add a contact programmatically?

    We use Exchange 2003. How can I add contacts to specific users via API or LDAP programmatically?  Is it possible? I was thinking of creating a web form in ASP.Net and when a user types the info of the new contact they select a distribution group. Once the group is selected I determine who is the...

    VladNYC5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following