• Need help monitoring network calls from iOS simulator

    My friend is having trouble so I told him I would post it on the forums. He's trying to monitor calls from his application to his server (just like Firebug does). He couldn't find a way to see it in iOS simulator or in xCode. Is there a way to do it without sniffing through all the traffic? If...

    ITKE351,300 pointsBadges:
  • Networking: How to step through a TCP/IP stack

    I was a recent QA engineer that worked for a proprietary embedded operating system. My company built a ATN stack and I have to admit, the best moment I had there was stepping through it with a debugger (eye-opening network moment). Just watching each layer build their part of the packet was...

    ITKE351,300 pointsBadges:
  • Transmission of IP Packets in TCP

    I’ve read that IP packets can sometimes get lost in transmission and that TCP often requests retransmission of lost data.  How often are packets lost permanently?  What are the requirements for retransmission?  Are lost packets a security risk?

    ITKE351,300 pointsBadges:
  • Hosting one AS/400 IP address to internet

    We are planning to host one AS/400 server to internet. Hence we created a network device and connected our DMZ server to AS/400. We assigned the internet IP address. Using intranet IP, we created the private digital certificate for the system and export to the desktop. I have a copy of the...

    naresh1984365 pointsBadges:
  • How to configure remote office server

    Dear friends, please help me: We opened a new branch, we need to access remotely our head office server, both are on same ISP, IP  also 192.168.10. in server & new branch 192.168.80. Please tell me how to configured in server. we was other branch also,

    mallesh6555 pointsBadges:
  • Can I use a Linksys print server as a bridge or access point?

    Can I use a Linksys print server as a bridge or access point?  I want to use it to connect a VoIP phone.

    4jbshere5 pointsBadges:
  • Is there a way to look at a specific port using a command line?

    Hi everyone! I'm looking for a way to examine the status of a port using the Microsoft Windows command line. I know there's NETSTAT that examines all ports but it's really slow so I want to look at one specific port.

    ITKE351,300 pointsBadges:
  • I need cisco aironet 802.11a/b/g driver for windows xp

    Hi I lost my cd that contained my network wireless adapter aironet 802.11a/b/g driver and I couldn't download it from cisco site!! Could anyone help me!? Thank you. --- Regards Mahnaz

    Aliyani265 pointsBadges:
  • What would be the quickest way to HTTP GET in Python?

    I need to know what the quickest way is to HTTP GET in Python (when I already know the content will be a string). I've been searching documents for one-liners like this: contents = url.get("http://example.com/foo/bar") But all I'm finding is "HTTPLIB" and "URLLIB" and I can't find a shortcut with...

    ITKE351,300 pointsBadges:
  • InterVlan Routing on Cisco

    Hi, I have Ipbase Image on a Cisco 4506 switch and configured several vlans eg. 2,3,4 and each have ip addresses associated with them as given below. interface vlan 2 ip address 172.16.2.1 255.255.255.0 interface vlan 3 ip address 172.16.12.1 255.255.255.0 i have said ip routing but i do not see ip...

    Mannie198035 pointsBadges:
  • To copy IOS of PIX version 6.3 from flash to tftp?

    Hello All, I want to copy ios of pix version 6.3 from flash to tftp……….. Can someone give me the exact command for this? Thanks Rahul

    Rahul Shrivastava330 pointsBadges:
  • Why is a TCP/IP reset RST flag being sent?

    Over the past several days, I can't seem to figure out why my application's TCP/IP connection is basically "hiccuping" every 10 minutes or so. After running Wireshark, I realized the other end is sending a packet with the reset RST flag set (after 10 minutes of inactivity). From what I've read,...

    ITKE351,300 pointsBadges:
  • Failed to open the group policy object

    On a XP machine I am trying to edit a group policy using the group policy management snap-in and keep getting a error: failed to open the group policy object. you may not have appropriate rights. It works on my other XP machine I'm a domain admin and have the logged on as the same user?

    Sjptarlo0 pointsBadges:
  • How to find packet sent address

    I need to create an automated response so that when I receive a UDP packet for a sender, that sender receives the address it was sent from. I tried using the recvform, but that only brings up the address of the sender, not the the address from which the packet was sent.

    ITKE351,300 pointsBadges:
  • Cisco router 2811 ipv6 configuration

    hi, can someone help me out how to configure ipv6 on fastethernet n serial interface? thanks.

    Vm8185 pointsBadges:
  • how to reduce high CPU and memory utilization

    please suggest me , is there any set of command to reduce high CPU and memory utilization of cisco router

    Vinesh123480 pointsBadges:
  • How to upload & run the .tar file onto Cisco 3750 Switch

    Hello, I have .tar file which i need to upload to switch & run the .tar file , can anyone has steps to do it , please let me know on my mail id . Thanks & Regards Sunny

    8SU15 pointsBadges:
  • Able to ping L3 VPN but unable to tracepath

    I am running an L3 VPN between 2 edge routers and have connected one router to a client (Linux Host). I tried pinging from the client an IP address (present on the other router) that was learnt via BGP VPN. It's pinging, but I am unable to do tracepath from the client. It gives me a "No Reply"...

    SearchEnterpriseWAN1,080 pointsBadges:
  • How to configure Cisco 2811

    How configure cisco 2811 for my small network with two c class ip serieses; keeping the valid security; and configuring ADSL and ISDN module in cisco 2811; from scratch ... step by step

    RizGhauri5 pointsBadges:
  • Is there a command to reset my network adapter?

    When I'm switching between my home and office network, I'm constantly facing issues while trying to get connected to my network. I always have to use "diagnostic service" and the problem gets solved when I reset the network adapter. But it still takes a lot of time and I'm looking for a command...

    ITKE351,300 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following