• Cisco Routers ios

    on a cisco router i have two ethernet conetions how can i make them one ip address for fault tolerance

    Crog115970 pointsBadges:
  • routers

    sir we are connecting our server through leasedline . one branch office connection is fast,but another area is slow, but two offices having same broadband connection of leased line.but one is dhcp enaled another is not installed dhcp pls give me the tips

    Pckarthikeyan0 pointsBadges:
  • g.729 3rd party VOIP on Cisco routers QoS – am I doing it right?

    Hi, I am unsure about which configs are sufficient for implementing QoS on 2 2600 series routers over a 2MB serial link. On one side is the IP pbx and there are up to 6 IP phones plugged into a switch on the other side. We are using a non-cisco VoIP product using g.729. From what I can see all I...

    Robbieg0 pointsBadges:
  • Stacking switches and IP Addresses

    Hi there, I have four 3Com 3300 switches that I have connected via Matrix cables (I think that's what they're called) and I was wondering what IP addresses I assign them? Do they all have the same IP address as they are operating as one combined unit or different IP addresses? I'm new to this kind...

    Rastafari0 pointsBadges:
  • communication between VLANs on 3com switches and cisco 6509

    is't possible to create VLAN's and communicate between them in a network were the backbone switch is cisco 6509, and the edge switches are 3com (stack switch 4400)

    Mishari0 pointsBadges:
  • Working of Switches

    I am willing to provide internet through the network cable to all the residents in my colony, I have bought switches to regenerate the signals, The thing I wanna ask is that if I use switches then at what distance I will have to set another switch? furthermore, what are the alternatives for...

    Tanoli0 pointsBadges:
  • Network Redundancy between switches.

    Here's the scenario. There are two comms rooms which both have two switches and are connected by a single uplink cable. What are my options for providing redundancy so that I never lose connectivity between the two comms rooms? I need both wireless and cabled solutions. Thanks in advance to those...

    JonathanAnon0 pointsBadges:
  • Cisco Switches

    I've inherited these Cisco Catalyst 2900 series XL switches from a previous Network Admin and is password protected. My question is, Is there a way to reset the password on these switches? or is there a backdoor password that I can use for this kind of situation? The former Network Admin do not...

    Sdr071515 pointsBadges:
  • Configuration Backup for Cisco Switches

    Hi, I have approx 20 cisco catalyst 2950 switches, and would like to be able to copy startup config into a tftp server on a monthly basis. Does anyone know if the IOS is capable of sheduling the copy command, or has anyone written perl or shell scripts to automate this process. ? Any Help Is...

    DerekKing0 pointsBadges:

    Hello, I have a managed switch and i have created three vlans in that switches. how can i communicate with these three vlans within this switch and also if i connect another switch with this one to the port belongs to vlan 1 then the frame comes out of third vlan to second switch will contain a...

    Breathe0 pointsBadges:
  • Configure an EtherChannel between 2 switches and a server

    I have a customer wanting me to do a couple of things that I need clarification on. First I have an existing catalyst 4006 switch that we are adding a new module to (mod 6). We also are putting in a new switch (catalyst 2948). The customer is wanting to trunk the 4006 to the 2948 on ports: on the...

    Hocmat230 pointsBadges:
  • Connecting Cisco Switches Back-to-Back Through the Console Ports

    Hi. I'm trying to find a way to connect 2 Cisco switches (could be 2x2950, 2x3560, or a mix of those) from console port to console port via Reverse Telnet. Any idea if it can be done; if so how can I do it?

    Atomas0 pointsBadges:
  • Teaming NICs across Multiple Switches

    The powers that be have decided they want to try to team our server NICs across multiple 4506 switches. Is this possible? For example, a server has 4 NICs, and they want 2 NICs to be connected to a 4506, and have the other 2 NICs connected to another 4506 to create redundancy and load-balancing. **...

    Ctrost0 pointsBadges:
  • Switches

    What are the advantages and disavantages of using a switch in a network?

    Philnkay0 pointsBadges:
  • Comparison of switches

    I want to upgrade my switches... are there resources on the internet which have a direct comparison of the performance of the different types of switches available such as whether Layer 3 switches improve latency, etc...

    Alanbloom0 pointsBadges:
  • career-2

    I was wondering what my next might be to move up in IT. Currently I have an Associates in Net Admin. and have been working as a Net. Techician for over 3 years, mostly dealing with servers, both Windows and Linux. What would be best, certification in particular area, going back to school, or more...

    goretech0 pointsBadges:
  • Certifications

    I know the Answer to this question will vary between each person, but out of all the certifications out there which ones will help out the most for a person trying to get into IT/Networking.

    KJC48550 pointsBadges:
  • about education

    dear sir i am working as computer hardware and net working engineer i am in these field about 4.5 years but i still thinks i am far behind i want to progress in IT what course i have to do either ccna or mcse which is the better course for futurescope i am in a company where thereis 2000 server and...

    Rpvish0 pointsBadges:
  • OSPF Network Types

    Can some one please explain the main differences and importance of OSPF network types?

    The Dream5 pointsBadges:
  • statistic

    what is statistic assignment of an IP Address

    Arpanet0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.