• Bind IP subnet to VLAN in Dell L3 switch

    when I bind an IP subnet to dell 6224 switch, does it mean when i plug in a pc within tat particular subnet will directly be in that VLAN? Example: i type in "vlan association subnet 10.0.1.0 255.255.255.0 10" to bind subnet 10.0.1.0 to VLAN 10. so is it when i plug in a PC with IP 10.0.1.30 into...

    IEIE1235 pointsBadges:
  • What is SDH?

    What is SDH and its applications?

    akhilreddy945 pointsBadges:
  • DNS Configuraton in RRAS VPN

    Hi Experts, I am implementing VPN server via RRAS in Windows Server 2008 R2. I have a DNS Server that resolves the hostnames for VPN Users. I want to configure my DNS in such a way that when someone tries to access a specific website e.g abc.com that would be redirected to the IP address which I...

    frankalbert5 pointsBadges:
  • DIA configuration in Cisco 887 router

    How do I setup DIA configuration in Cisco 887 router?

    junukm5 pointsBadges:
  • How can I get started with CCNA?

    What is the procedure of doing CCNA?

    arianveer5 pointsBadges:
  • Minimum distance required between CAT5e terminations

    Can you tell me if there is a minimum distance required between CAT5e terminations? I am told that the standards require at least 15m (50ft) between terminations, such as between a main cross-connect panel and a consolidation point patch block. Also, that if the actual distance is less, enough...

    NetworkingATE1,545 pointsBadges:
  • Outlook sending email to Yahoo only when connected to VPN

    I use Outlook 2010 to send and receive emails to/from several of the std email providers. I have a VPN that I use for connections to the internet, periodically. Why can I only send emails via yahoo through outlook only when I am connected to VPN outside the USA? I receive all the mails fine, but...

    TheRealGreyGhost5 pointsBadges:
  • How to connect two client VM to server in VM BOX using TCP?

    How do I connect two client VM to server in VM BOX using TCP, and how server give read write access privileges to clients?

    kiranpatel845 pointsBadges:
  • Internet problem with Wi-Fi connection

    Hey, my friends bought a BT Wi-Fi for 1 month and their problem is they don't have a connection inside the apartment but it does on the street, it's a ground level apartment with a fence on the side where the Windows are, but I doubt that's the problem because they could connect before then it...

    Firetrucker5 pointsBadges:
  • How to set my laptop to update from my server

    I would like my server to download updates for antivirus. How do I set my laptop to update from my server using my wireless access point?

    vernondoe5 pointsBadges:
  • Use physical network card only with virtual machine

    Is it possible to connect in bridge mode the physical network card only to the VM? I would like to have no use of the card by the host (except for the needs of the VM).

    Borzag5 pointsBadges:
  • How to broadcast internet services with infrared

    If you ran fiber to all cell phone towers, could you broadcast internet services with infrared? Maybe even TV?

    brown72285 pointsBadges:
  • Long Distance Phone Call

    Hi for some reason the company phone can't make long distance calls anymore. Usually you just need to dial 9 and than the number to call. I was always greeted with the messsage telling me to dial 1 or zero before dialing in the 10 digit number. Despite doing this I still can't connect. The phone...

    leungjohn30 pointsBadges:
  • Load balancing on a Cisco router

    I have three different bandwidth link & terminated on Cisco router (3900 series), I want to do load balance. i.e.If one link got down traffic should go on other two links. How do I do that?

    nazimnml5 pointsBadges:
  • Switch from Cat6 unshielded to shielded?

    I am cabling up a large building with labs and offices. Going to each fixed computer, I want a short unshielded cat6, as these are easy to replace. However, out of the room and to the server room, I want shielded Cat6. Can I use a switch to convert between these? Or do I need a patch bay?

    Ciel1215 pointsBadges:
  • Dell Optiplex 390 video issues

    Replaced the motherboard and still cannot get video. What is the problem?

    josephballing65 pointsBadges:
  • How to measure network latency

    How is network latency measured? Is 27ms good for a network? If that's true, than lower the number and the better?

    subhashmishra5 pointsBadges:
  • How to best prepare for CompTIA Examination?

    I have done my engineering in ECE and I'm looking to excel my career in networking. I have heard a lot about CompTIA network + certification. How should i prepare for the exam?

    XtremeNavi15 pointsBadges:
  • How to Practice Properly for Security+ Certification?

    I have given CompTIA security+ online exam once but I wasn't able to clear that. Please let me know the best methods for preparing for CompTIA Examination

    XtremeNavi15 pointsBadges:
  • Oracle In Linux

    How can I able to get and work with Oracle in Linux platform. I am using RedHat Linux 9.0.

    Samachar0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following