• tagging ports on cisco switch

    I have configured a 3750 switch to communicate to a 3550 switch and I set up vlans and I trunked the uplink ports. I am told that I should configure the ports for tagging, I am not sure what the tagging will do for me and if it is really needed. Please explain tagging. tks in advance Msflex1

    Msflex15 pointsBadges:
  • cisco pix firewall

    how do make the vpn more secured with cisco pix firewall.what are the prerequisites to have security with pix firewall.guide about the pix features

    Jagadeeshpatil0 pointsBadges:
  • Cisco 1751 V Router

    My 1751 V Router seems to be in an endless loop during the boot-up process an I get the following errors. How do I breake out of this. I have tried Ctrl-Break during the decompression of the .cfg but the router remains in the loop. I Just would like to get it back to the factory default stage....

    GoatRoper0 pointsBadges:
  • No response from Cisco 2500 series router console port

    I recently purchased a 2501 Cisco router off of ebay. I am having trouble connecting to the console port. Is there a way to diagnose the problem? I am using a rollover cable and the proper settings for the terminal emulation program. I can hook up to my other 2500 series router and I unplug that...

    Skepticals0 pointsBadges:
  • VPN & CISCO 2610 setup

    Hello Sir/Madam, I cannot access our VPN from the internet outside our organization. I am using Cisco 2610 Router with IOS v12.3. And i created the access-list for the inbound and outbound connections. I have mentioned the access-list below and also i mapped a static IP address with the VPN...

    Parames0 pointsBadges:
  • Checkpoint firewall and Cisco VPN

    Hi all - I have this problem now for 2 separate people and am a little perplexed. Here's what's happening: We have a Checkpoint firewall (Nokia), very restricted access. We have consultants or auditors that come in and need to access their Cisco VPN from inside our firewall and it always fails. I...

    Lirria0 pointsBadges:
  • Strange error message from Cisco 2980 router

    Hi, I'm getting an error message from my Cisco 2980 switch when I type "write mem". The error message is "This command is available only in text configuration mode." I have another identical switch but I don't get an error message when issuing the same command. The CATOS is 8.4(11)GLX. The...

    Devnul0 pointsBadges:
  • Query regarding the functionality of a router

    hello all, I'm trying to connect my phone to a braodband connection and use. For this I do have a Phone adapter and a Hub. While trying to setup the Phone adapter, it says that I need to connect the router. Can i use the hub as the router..?

    Administration3260 pointsBadges:
  • Wireless Router Setup

    Can anyone help me out? I currently have a router in my home office. I want to replace this router with a wireless router I have two laptops and two desktops my two laptops have wireless nic cards and I would like to have my two desktops to remain hard wire. Would there be a router that can do...

    Kimsonya0 pointsBadges:
  • Linux Server Intalltion( How to convert linux machine to as router)

    Hi, am siv Here i have two servers(Windows 2000 & Linux 9.0) and 50 node machines. and We have internet lease line with static ip address. Now i want to convert linux mahcine as router. In linux machine have two NIC's, one private ip and other public ip. node machine are able to suff the net. But i...

    Shivcol0 pointsBadges:
  • Access point and router IP settings

    I hope someone can shed light on this dilemma..Here is my problem I have a Linksys BEFSR81 wired router, and a generic (no name) 2.4Ghz. wireless access point router.... and a Linksys EG0801W 8 port switch. Here is my set up thus far and works and has for years.. Here goes. Modem Bridged to Router...

    Keithsplace0 pointsBadges:
  • Can’t access settings on a wireless router when used as an access point

    Short story long... I have a small office that belongs to a domain and has all IP addresses assigned via a Cisco PIX (10.10.10.xxx). Within this I have a TrendNet TEW611BRP Wireless Router. If I plug the WAN into the WAN port on the TrendNet then it works as it should, providing another subnet...

    BandHSolutions0 pointsBadges:
  • router

    I need to access a Web site internally through an external address i configure my router and i use nat command for this but i cant access my internally through an external address please help me

    802112270 pointsBadges:
  • router to switch

    Will this be OK? we have seven rooms in the building, so here it goes we have a router with 4 available ports connected to SDSL, im planning to connect two 8 port switches in it then connect all seven 8 port switches (the 7 switches are installed in every room) DSL>>>(1unit) 4 port...

    Jetspeed0 pointsBadges:
  • D-Link Wireless Router and wireless access point problem

    I have a D-Link DI-524 Wireless router set up in the office downstairs, this is connected by CAT5 cable to a D-Link DWL-G700AP access point upstairs (as the wireless signal from the office did not reach between floors). There is also a printer connected to the office router to enable printing from...

    Mrssmith0 pointsBadges:
  • Cisco Routers ios

    on a cisco router i have two ethernet conetions how can i make them one ip address for fault tolerance

    Crog115970 pointsBadges:
  • routers

    sir we are connecting our server through leasedline . one branch office connection is fast,but another area is slow, but two offices having same broadband connection of leased line.but one is dhcp enaled another is not installed dhcp pls give me the tips

    Pckarthikeyan0 pointsBadges:
  • g.729 3rd party VOIP on Cisco routers QoS – am I doing it right?

    Hi, I am unsure about which configs are sufficient for implementing QoS on 2 2600 series routers over a 2MB serial link. On one side is the IP pbx and there are up to 6 IP phones plugged into a switch on the other side. We are using a non-cisco VoIP product using g.729. From what I can see all I...

    Robbieg0 pointsBadges:
  • Stacking switches and IP Addresses

    Hi there, I have four 3Com 3300 switches that I have connected via Matrix cables (I think that's what they're called) and I was wondering what IP addresses I assign them? Do they all have the same IP address as they are operating as one combined unit or different IP addresses? I'm new to this kind...

    Rastafari0 pointsBadges:
  • communication between VLANs on 3com switches and cisco 6509

    is't possible to create VLAN's and communicate between them in a network were the backbone switch is cisco 6509, and the edge switches are 3com (stack switch 4400)

    Mishari0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following