• Integrating CTI applications

    We are working to expand the Phone system to enterprise level over an existing MLPS network using SIP to integrate 5 different CTI applications. Would like mix of vendor neutral and vendor-specific content. This request for help was originally submitted to the Research Assistant on WhatIs.com.

    ResearchAssistant855 pointsBadges:
  • RAD MODEM LOOPING

    how to take loop test on HTU E1 Leased line modem to test physical connectivity

    Manojwithicfai20 pointsBadges:
  • NIC Does the NIC changes the binary data to analog signal or to digital signal ?

    Sir , Does the NIC changes the binary data to analog signal or to digital signal ? I mean did the data traveled on cat 5 cable between two pc connectd through NIC is in Digital OR Analog signal ?

    Kkdave15 pointsBadges:
  • Windows Mapping to IFS

    After creating a folder in /home and giving PUBLIC and the user Full authority, we map to the folder from windows explorer. Some how the folder is 'read only' How do I change this?

    sfaribault25 pointsBadges:
  • NetBIOS Resolution, DNS, Windows Domain over MPLS VPN

    Hello all, I've been looking for a while now for a way to forward this traffic from one site to another, connected over MPLS VPN. All help appreciated.

    TDoyle5 pointsBadges:
  • VPN is running slow

    What would cause our VPN to run slow and lose packets? The main data connection is running fine, but the other locations trying to VPN in are running slow. Why is this?

    Horning5 pointsBadges:
  • Slow Windows XP response because of 2 ethernet connection

    Currently, I installed a USB WiFi thumb into my XP which has already a ethernet connection. I found that my XP will soon halt for a while repeatly after I get connected with the USB WiFi. I have tried to delete all the network drive. It seems better, but still has the problem. Any solution?

    SingSingWong5 pointsBadges:
  • barcode label print from as400 Wasp brand printer

    Is anyone familiar with the Wasp brand label printer and how to print to it from the AS400? The printer is connected to our network, it has a nic card. I can ping it's ip address from the AS400. Is there anyone out there who uses this brand of printer that could tell me exactly how to set up the...

    Geekprime275 pointsBadges:
  • AS400 spool file printing twice

    AS400 - 820 - V5R3V0 - I have a couple of printers, Genicom line printers, when a request is sent to print a report about 5 minutes later the same report is printed again. These are interactive jobs requesting this report. I have checked everywhere I can think of and can not find a reason for this....

    Dlc21140010 pointsBadges:
  • Cabling and accessories amounts

    First, let me say thank you in advance to anyone who helps me out. I've been charged with the task of figuring out how much cabling and accessories I need to get quotes for for hooking up 46 - Netgear FSM7326P switches to 185 desktop computers. I don't know the size of the office and any other...

    Ekwaplah5 pointsBadges:
  • How to block a series of IP addresses in Cisco 2600?

    i want to block a series of Ip address in 2600 series, pls suggest me how is it possible , what is the command line

    Riyaz10 pointsBadges:
  • Configuring a Win2003 share to be available to all XP users on networked machines

    Been a long while since I've worked with Windows, and the networking metaphor is killing me (Unix here...). I have in a server room a Win 2003 server with a large RAID. There are 4 XP machines in 2 offices, all on the same LAN/subnet (2003 server is DHCP server for the XP machines). The network is...

    Smsd15 pointsBadges:
  • Exchange Server 2007 Edge Server DNS DMZ IP problems?

    Ok, so we deployed Exchange server 2007 with an Edge server. The Edge server has two network cards. 1 Card for the DMZ in the 10.10.10.x range and 1 in the internal 192.168.13.x. Problem is when it is up and running it works fine, for ~10-12 hours. After it stops receiving email but can still send....

    bradob160 pointsBadges:
  • load testing

    which free tool you suggest for load testing ,as so far no load testing have been done in my company..I need some perfect results ,

    Quality455 pointsBadges:
  • Fabric / Storage Administration

    Currently today, we have a group that administers our storage from end to end (HBA to switch to storage cabinet). Our CIO is looking to give the responsibility of our Fabric to our Networking folks. I was just wondering how other places layed out the responbility of the different aspects of...

    MemphisJim5 pointsBadges:
  • Configuring local stroage network

    on my XP machine, I have 2 NICs (one connected to a GB network and on only to a switch connected to only 2 networked disks [Ximeta Netdisks]). On the GB connection (my local area connection) I am running all the standard protocols and on the other NIC (my local storage network) I am running...

    Veltkamp0 pointsBadges:
  • Oracle Applications view functions mapping

    hi, I have a query regarding Oracle Applications (OA) and I hope you will be able to assist me. I am looking for a list of OA functions which are VIEW functions, according to the hard-coded definition of Oracle. In other words, I am looking for a list of FORM FUNCTIONS that allow users only to view...

    Orit15 pointsBadges:
  • Script for ip address change for pc5250

    We are having an ip address change on our AS400. We have some users who connect through client access using static ip address. I need a script that will change this static ip in the *.ws file in client access can anybody help?

    Rrsys4005 pointsBadges:
  • Configure PIX to allow access to Remote Web Workplace and Exchange Server on SBS 2003

    We have the following network configuration: Router -------- Outside: Static IP from ISP Inside: IP Address: 10.0.0.1 (Static) DHCP enabled for all other clients Pix ------- Ouside: 10.0.0.2 (DHCP from Router: Resvered) Inside: 192.168.2.254 (Static) Network ---------- 192.168.2.0 255.255.255.0 All...

    KitManSupport5 pointsBadges:
  • Would I be able to get job in IT industry if I do CCNA?

    Dear Sir, I am BE(mech) guy.I had exposure to electronics field to the extent that I gad taken 2 years Vocational course in Electronics during my 11th and 12th standard education. Also I have completed Japanese Language proficiency Test(JLPT-Level 3) So being a BE(mech) guy would i be able to do...

    TechFileder10 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following