• Joining workstation to the domain………….

    Hi Please help me is anybody can!!!!! For" joining workstation to the doamin" right I did this 2 step: 1-defining an user account for delegation 'joining to domain' right 2-defining this user account in dofault domain policy->joing workstation to doamin but this user still couln't join...

    Aliyani265 pointsBadges:
  • Connecting 2 NIC’s without a bridge

    I have a computer that has two NICs installed in it. The computer is a host pc for a POS system. So the one nic is used to manage my POS systems and its terminals/peripherals. The other NIC is connected to a seperate network (Internet, Network Printer, NAS) with a few other machines, and I call it...

    Abyss9095 pointsBadges:
  • networking

    How do i connect my printer (hp psc 1210 all-in-one) to lan

    Debra Buras0 pointsBadges:
  • Network Topology in Different Terrain

    Hi, What types of network topology (e.g., ring, star, bus etc) would you recommend when designing WAN for the following types of terrain: (a) flat terrain (b) hilly terrain What is the reason for choosing such topology? Also what are the recommended WAN technologies to use (e.g. Point-to-Point...

    Iceflamez0 pointsBadges:
  • Bridge connections

    When the phone line( through EPBAX , Extensions) is connected to the Bridge for the conference call, it will hang for the hours , even if it is disconnected. Thus causing the huge phone amount.

    Bhadrinarayangirish0 pointsBadges:
  • RTP reordering

    Would like to know about what are the algorithms for RTP reordering and which specs give me details on the same.

    Thampi lakshmi5 pointsBadges:
  • VPN between DLink and Fortinet

    Hi, I have a DLink - DI-824VUP+ and a Fortinet60. How can I create VPN tunnel between these two. Thanx.

    Techpupil0 pointsBadges:
  • When I use my VPN software to access my office my my wired PC, the wireless network gets disabled.

    What is causing this and how do I correct it so the others can still use the wireless connection while I am connected to my office

    Bruceh070 pointsBadges:
  • UNC over WLAN issues

    For some reason I cannot get UNC to work over the WLAN connection I have setup in my office. UNC works if I'm connect through a ethernet port though. I've tried adding the IP of my wirless AP to the 2k3 server resolving the UNC connections to no avail. Any help would be greatly appreciated.

    Wingsforstanley0 pointsBadges:
  • Odd Network Controller!

    My HP Compaq nx6110 was stollen last month but recovered by the police last weekend. My hard disk had been sold, so I got new one, but on reinstalling the system, the ethernet network adapter - which used to run with the Broadcom 4400 10/100 Drivers on the Application Recovery DVD - doesn't install...

    Lance010 pointsBadges:
  • Netgear GSM 7324 Configuration

    I have a netgear gsm7324 that needs to be configured as a router. I will connect several servers directly to this switch. I have WAN public IP's and LAN IP's. For each server should I configure a WAN for the port and LAN for the server? Thxs ML

    Mlev113011300 pointsBadges:
  • Can’t install printer

    Hi, I am attempting to install an HP Laserjet 1320 pcl 6 printer, connecting to the pc using a USB cable, the PC is running Windows XP. When I launch the installation program from the CD and begin the driver installation, I get a Windows error message which reads: Cannot Install this Hardware There...

    Nickc197665 pointsBadges:
  • Configuring a Deciosn Data 6615 Printer – Unlock Key Sequence

    I know this is an old printer, but I am trying to find out how to unlock the printer and change the configuration. I can't remember what is the key sequence is to unlock the printer. PLEASE HELP... Thanks - Bob

    Rbryant10 pointsBadges:
  • Setup Partial global Notes Address Book replication

    How to add values to the NAB on one server, but these changes not to replicate to the other servers. So one NAB would have more fields than the rest of them. This is because we need to use Cisco Unity with Lotus Notes, but is not going to be implemented through the whole organization.

    Rfuentesd0 pointsBadges:
  • number of hosts

    what is the maximum number of hosts you can have on a class B subnet

    0 pointsBadges:
  • Policy for Wireless Mobile Computers

    We have only recently allowed the use of wireless NICs on our corporate laptops. Our sales force hopes to use the technology to send orders, retrieve email, etc. I have been charged with writing a policy governing the types of PCMCIA cards and also how the technology is to be used. I have concerns...

    Brebeck0 pointsBadges:
  • Internet Explorer ” page cannot be displayed”

    Hi, I am facing a peculiar problem. i am administering a LAN which is having 30 computers all are connected to switch. 512 Kbps DSL line is also connected from modem to switch. in clients machine DNS server IP , we have given our ISP's DNS address. when there is heavy browsing users get the error "...

    Kishoregopan0 pointsBadges:
  • Secure Wireless

    I bave setup secure wireless LAN with Cisco lightweight APs, WLC & ACS & implemented LEAP. Problem is LEAP is not supported by Vista. I need to support both XP & Vista clents. What Security Protocol should be imlemented?

    PM0 pointsBadges:
  • Poblem Setting Radius Attribibute 22 (Framed-Route)

    Hello, Can anybody tell me where to set the radius attribute 22 (framed-route) on a windows 2000 IAS server. Thanks

    Rounds198160 pointsBadges:
  • Connecting Separate LAN’s Through Routers

    I have two LAN's in my office, each with its own internet connection. I'll call them LAN A and LAN B. Each LAN has an inexpensive ADSL modem router (with wireless and wired connections) to which the computers attach and which attach to the internet. I want to share information and printers etc....

    RtX0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following