• Need help designing a network for videoconferencing for a campus?

    What type of severs, routers, bridges, switches and cables are suitable for videoconferencing? Also, how do you design a network for videoconferencing for a campus? Please help me. Thank you.

    Networking Channel ATE30 pointsBadges:
  • Is it any good to have 1 QoS router on WAN with VOIP

    I am thinking of implementing VOIP on a network that links 2 sites via DSL and Linksys BEFVP41 routers which do not support QoS. I am wondering whether it would make any sense changing one of these routers with a RVS4000 to ensure good voice quality. I would like to avoid purchasing 2 new routers...

    EB35 pointsBadges:
  • What is the best and least expensive way to connect two computers with different operating systems

    What is the best and least expensive way to connect two computers with different operating systems to one printer without conflict?

    Buffdaddy5 pointsBadges:
  • Maximum share size in Windows 2003

    I was reading an article by Gary Olsen on the techtarget.com site entitled "Leveraging DFS in Windows Server 2003 R2". In this article Gary states, "the administrator reported a performance problem on one site that had a 62 GB share size, which is close to Microsoft's recommended maximum of 65 GB."...

    Dkervin5 pointsBadges:
  • Need help with load balancer configuration change on Cisco 11506

    I've got a mind boggling question about Cisco Loadbalancer 11506 series. Here is a sample config; ----------------------------------------- service WPST01 ip address 192.168.120.61 keepalive type HTTP string WPST01 active service WPST02 ip address 192.168.120.63 keepalive type HTTP string WPST02...

    NetworkingATE1,545 pointsBadges:
  • Need help upgrading Cisco 7507 router

    I'd want to upgrade IOS Router 7507 but min flash IOS new version requires 32 M. Cisco RSP8 (R7000) processor with 262144K/8216K bytes of memory. 46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes). 16384K bytes of Flash internal SIMM (Sector size 256K). How can router upgrade IOS?...

    NetworkingATE1,545 pointsBadges:
  • Server and ASA DMZ

    Hi Im from Guinea Bissau west Africa then i have some problem with my network. My server doesnt see my ASA DMZ and ASA DMZ doesnt see the server too. So what i have to do solve this problem. Pls if any one can help mail me by omartins@mtn-bissau.com or otnielomar@hotmail.com.

    MTN5 pointsBadges:
  • What are the most pressing issues with VoWLAN technologies?

    I am currently conducting a feasibility study on Voice over Wireless LAN (VoWLAN). What are the hottest and most pressing topics and issues concerning VoWLANs that I could potentially cover? Thank you.

    Unified Communications ATE2,280 pointsBadges:
  • Cisco ASA DMZ configuration…

    I am in the process of setting up a DMZ in order to host a Web Server and an Exchange Server. I have been doing a great deal of research and have a few questions. This is my setup: Internet====>ASA====>Inside Network (Cisco Switches) I want to use an additional switch and attach it to the ASA...

    Skepticals0 pointsBadges:
  • networking groups

    To "Buddyfarr" or anyone who can answer this. Buddy you answered a question from a guy(Networking ATE) trying to get his foot in the door with his CCNA on March 12. One of your suggestions was to join a social networking group in his area. My question is how do you go about finding these groups? I...

    Qw3rty5 pointsBadges:
  • layer 3 issue on a layer 2 device.

    I have a 2950 switch and its set only as an Access layer switch. uplinks arent even trunked. im using the native VLAN for mgmt and a different vlan for the users. the switch is being able to work as layer 2,switching packets. but im not able to ping the IP for the mgmt VLAN. there is a default GW,...

    Tafiela55 pointsBadges:
  • ROUTING INFORMATION PROTOCOL

    why routing information protocol employ user datagrame protcol over transmission control protocol

    Saad5 pointsBadges:
  • How does a gateway convert incoming PSTN numbers to IP address format?

    How does a gateway convert incoming PSTN numbers to IP address format?

    Unified Communications ATE2,280 pointsBadges:
  • Need career advice for Network Communications Management

    I am attending school currently, and will graduate with a Bachelor of Science degree in Network Communication Management. I am wondering if this degree is enough to be successful or if I should consider obtaining my Master's degree prior to entrance into the workforce. I am also working towards my...

    Unified Communications ATE2,280 pointsBadges:
  • How to add software packages in Altiris

    Can anyone shed some light on the correct process to add new software to existing PC's in the network. These PC's might be Dell GX240's, GX270's. GX620's, GX745's, Laptop's, HP PC's or even a few Gateway's. The applicatons might be new educational software or updates to existing applications like...

    TomC5 pointsBadges:
  • Synchronization between two exchange servers

    Hi We have two cooperated networks and want to synchronize our Outlook Calendars between the two Exchange servers - how can we do that? We are trying to get a VPN Site to Site up and running. Our system is Windows 2003 Server and Exchange 2003 Thank you for your time Regards

    Syddansk5 pointsBadges:
  • Cisco AcessControlServer – Authentication

    Hi I'm configuring a Cisco ACS for our diploma thesis and now i have this problem: The Authentication of the IETF Radius-server operates properlym but the authentication of the nac doesn't work. All clients come in my quarantine-vlan. In the logs there is the SharedRAC: Quarantine_RAC displayed. I...

    Stefan6005 pointsBadges:
  • Windows 2003/ Exchange 2000 Mangled attributes

    I have a windows 2000 Domain controller. it is the only server on our network, and is about to be replaced with a windows 2003 server. i have read several places that before i run adprep/ forestprep i need to run an inetorgpersonfix for exchange 2000 (what we currently use). but do i only need to...

    Jlcelestine35 pointsBadges:
  • How to connect to my servers from behind customer firewall?

    I need to do some product demos connecting to my server. However many times the client firewall rules prevent me from accessing my server. My application needs access to multiple ports (apache, tomcat,oracle,..). Is there some VPN software I can install to resolve my problem? I would appreciate...

    Chennapan30 pointsBadges:
  • PIX Connectivity question

    Hey guys maybe I'm not understanding something here just want to make sure I'm thinking right. ok I have a pix, a 2821 and a 3845. The pix is configured and already has an insdie/outside interface. What I'm doing is going to add another inside interface on the pix and connect the 2821 to it and...

    Gurowar40 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following