• How can we inject corrupted packets in to a network purposely?

    I intend to do a project in cloud forensics. So as to analyze the packet captures from the cloud, I have to purposely inject corrupted packets in the network and thus into the cloud so that on a later stage I can analyze the packet capture for forensic analysis.

    hatvijay5 pointsBadges:
  • Routing all data from one IP to another in Linux (CentOS)

    I like to route all data that is coming in at one IP address of my server to another IP address somewhere else on the internet. For example: My server has 2 IP addresses: and All the data that is coming in at IP address should be forwarded to address (this address it...

    maartenvika25 pointsBadges:
  • Use Windows VPN for a particular network

    I'm trying to use a Windows VPN but only for one specific network. It can't take over my whole network connection. Would it be possible to make this automated so when I connect, it always does this? I appreciate the help.

    ITKE371,835 pointsBadges:
  • Option 65 not available on LAN

    Hi guys, I have a power 5 525 that has been disconnected for a long time. I'm trying to bring it back to life. I went to control panel to select LAN console with 65+21 in manual mode but after doing 25 + 26 it only goes until option 64. Any ideas on this one? Thanks in advance

    Aringarosa325 pointsBadges:
  • How to check IP address of a printer in AS/400?

    How to check IP address of a local and remote printer in AS/400? Are there any specific commands available to check?

    rahsin20 pointsBadges:
  • I/O and Operating systems

    Why does the Operating System need to manage the I/O functions?

    Woolley5 pointsBadges:
  • Network connectivity within a storage rack

    How many components within a storage rack need a network connectivity (NIC) - servers for sure, are the storage modules connected directly to the network as well? Also how many simultaneous connections are needed for each of these components?

    Leonessa5 pointsBadges:
  • Keeping a SSH tunnel open

    For the past few weeks, I've been using a SSH tunnel from my job to get around different firewalls. My boss knows about it so it's okay. But after an hour, the SSH connection hangs / the tunnel gets broken. I'm trying to figure out how to at least monitor the tunnel automatically so I can just go...

    ITKE371,835 pointsBadges:
  • TCP/IP data transmission between the source and destination host

    What are the four steps to TCP/IP encapsulated data transmission obetween the source and destination host?

    Windy192710 pointsBadges:
  • Firewall for home security

    I'm looking for a good yet simple firewall hardware device to use on a home network. Current configuration is as follows: Optimum on-line cable modem Netgear switch From the switch I feed direct ethernet connections to 1 desktop Apple computer and an Apple TV for movie streaming. Also have an Apple...

    rfriedny5 pointsBadges:
  • How to set proper TCP buffer size?

    Hi, We have 3 AS/400 systems PR, HA (Both are on same physical location) & DR (situated in different physical location around 1000 KM away from PR system). All the three systems are in sync using MIMIX Global. We had 100 mbps WAN link configured for PR to DR replication. PR & HA replication...

    Ketan19305 pointsBadges:
  • What default SSID and default password can I connect to a network

    How can I get into a default SSID / password to connect to a network?

    arshjii5 pointsBadges:
  • Can I become a NOC engineer?

    If I do not have a CCNA certificate, can I become a NOC engineer?

    reetup5 pointsBadges:
  • Have Windows 7 ignore Wi-Fi over Ethernet connection

    Whenever I dock my Windows 7 laptop, I always connect through a wired Ethernet connection over Wi-Fi. But how can I make it ignore the Wi-Fi when Ethernet is available? Thank you.

    ITKE371,835 pointsBadges:
  • Where do I find my access list for my Wi-Fi router?

    I need to access my approved access list for my Wi-Fi router but i don't know where to find it on my computer.

    AustinRowland225 pointsBadges:
  • Batch file to disable or enable network adapter

    Dear all, Is there anyone that knows how to write a batch file to enable / disable local area connection just by 1 click on the batch file? Thank you so much...

    Powerofnetworking45 pointsBadges:
  • Preferred and alternate DNS

    Hi, I have set preferred and alternate DNS addresses for my router. I used OpenDNS addresses and Norton connect safe addresses. But those addresses changes frequently  maximum 1 or 2 days I think. My question is how to fix alternate and preferred DNS permanently. Whenever these addresses changes i...

    jannetsusan5 pointsBadges:
  • Measuring packet loss

    How do I measure packet loss?

    sielay5 pointsBadges:
  • Internet not working in VLAN 2

    We have Cisco 2-tier drop-down campus network, that has 2 core switches, with ASA firewall and TMG is working for contents filtration. All clients are connected in VLAN 1 in the core switch to get internet connectivity. We created a VLAN 2 in core switch and tried to give all clients internet from...

    Sahil715 pointsBadges:
  • Differences between synchronous and asynchronous data transfers

    What is the difference between a synchronous and an asynchronous data transfer?

    NetworkingATE1,545 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.