• Accessing heterogeneous disk arrays to a Windows server using a single HBA via SAN

    I am planning my disk array upgrade, and I want to know if anyone has any thoughts, or if there are any reference/best practice/white papers, for accessing heterogeneous disk arrays to a Windows server using a single HBA via SAN. Any concern about the multi-path software?

    SearchStorageATE215 pointsBadges:
  • Router configuration – Invalid input message configuring EIGRP

    I enter the following command to configure eigrp using a wildcard mask, and I get the output "invalid input detected at" under the first character of the wildcard mask. This same command works on all other routers in the network. The command seems correct? Why this router? R2(config)#router eigrp...

    Ytechie5 pointsBadges:
  • DFS management (distributed file system)

    I have set up a distrubuted file system for our company. I have tried out some thins, and they work fine, I only have one problem, and I don’t even know if it is possible, but I was hoping you could tell me I have a folder strucktur today that goes \\server\folder\folder2\folder3 and so on The...

    Conda5 pointsBadges:
  • Configure ports

    how do u configure uer network to forward tcp and udp ports 6346 to ur local network

    Katwoman5 pointsBadges:
  • LDAP hidden contacts

    Is there any way that I can quickly find out who is hidden in Active Directory for Exchange recipients, contacts and Distribution Groups?

    Ctameron10 pointsBadges:
  • Xen guest from one host to another migration error message

    I get this error when attempting to perform the migration of a Xen domain U guest from one host to another the migration command files as follows: # xm migrate 7 -l Error: can't connect: No route to host Usage: xm migrate <Domain> <Host>

    ITKE376,460 pointsBadges:
  • Static IP in scope

    does it matter if a static LAN ip is included in a routers DHCP scope? lets say routers scope is 50-100 and my static LAN ip is in that range?

    Unclebunkiefromhell5 pointsBadges:
  • Diff between transport and broadband

    what is the difference between selling transport and selling broadband telecommunications services?

    Techdetective5 pointsBadges:
  • How can my boss access her emails remotely in Outlook 2007_advanced set up

    Hi all I would be extatic if I could have this problem answered. My boss was away for a week and needed to access her emails. When she logged on she could only see 2 emails and they were not work related. I was sitting at he computer and there was close to 150 emails that she needed to access....

    Megsdraw5 pointsBadges:
  • can’t browse network

    At intermittent times of the day or week. I cannot get to the other computers on my network. Users are accessing Qbooks on the network and are usually able to get into Qbooks but sometimes the network printers refuse to work or you cannot get to other computers on the network to access their files....

    Kmartin5665 pointsBadges:
  • Destination host Unreachable

    I am trying to ping But answer comes: destination host unreachable. Few days back, i could do it. But now the message comes that. I am also checking pathping. The answer comes that "one ip address invalid". What will i do, pls advise me.

    Bigyan5 pointsBadges:
  • Location of Management LAN port

    Which is better, a serial port on the front or back of a server/switch device for initial configuration and when the device is not working.

    Aprakash10 pointsBadges:
  • VPN Tunnel

    Hello. This is my current setup. Main office has several servers (usual web, ftp, exchange, dns) which is using an RV042 router for the network. At the remote office, I have a Netgear FVS318v3 router that is maintaining the VPN tunnel back to the main office. I can't narrow down the problem. I...

    rcraig11420 pointsBadges:
  • Bridge vs router

    what are key differences between a bridge & router? I know that a bridge connect between WAN network and a router connect PC within a network. What else should I know?

    Spock12035 pointsBadges:
  • *IPDS printing on network printer

    We have obtained a Tally T6212 network printer with *IPDS option to replace an IBM 6400 twinax printer. I have tried many different settings: CLASS(*LAN) TYPE(*IPDS) - Remote outq and virtual printer, but to no avail. The standard SCS output is printed, but an *IPDS printfile is either printed with...

    r.otto810 pointsBadges:
  • List Multiple directories during FTP Session

    During an FTP session, I need to go to 3 directories on a remote system. I want to list out the contents of the directories for me to use later. I know I can use the DIR (disk command, and it will put the data in *CURLIB/DIROUTPUT.DIROUTPUT, but it is a replacement, not an add, so I can only get...

    Klw50 pointsBadges:
  • Cisco 3550 Failover

    Hi, I am wondering if there is any failover (active- active or active-passive) solution for 3550 switches. I just would like to sync configurations of two 3550 as backup of each other. Thank you for your time in reading/responding my question. Emre.

    Emrecelebi5 pointsBadges:
  • Cisco wireless controller authentication

    Have serveral RDT devivces that are set up to Cisco Wireless controller. The devices are connecting and authenticating fine, but it seems when rdt's roam from 1 ap to another the rdt's need to re-authenticate even thought they are already authenticated. Can not find on the Cisco controller of...

    Phippsi5 pointsBadges:
  • What is the syntax for extracting an attached file to a server?

    I am using LotusScript to extract a file from an email message. I am having problems with the syntax that should be used to extract a file to a server. An example of my code is as follows: destinationFileName = "http://123.456.789.0/Root/tmp/LCESALES/" + lname With objFTP .PutFile...

    LotusGeek5 pointsBadges:
  • Exchange 2000 and Active Directory mess

    I inherited the bulk of these problems due to poor forethought by a previous consultant. He moves on server crashes I get called in with no real history or information, workarounds to get business critical apps going while waiting on parts for other server and now stuck in the quagmire I'm in....

    Injury5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.