• cisco routers

    how to deny download from internet for spesfic ip address by cisco router please step by step

    Monkez50 pointsBadges:
  • VLANS and cisco 2960 switch

    VLANS and cisco 2960 I have a new cisco 2960 switch gig 0/1 connecting to a 3560 on gig0/9. the problems is my vlans will not come up. I have configured another switch the same exact way and it works fine. The only line in the commands of bith switches that is different is ip http secure-server.

    ITKE392,005 pointsBadges:
  • multiple domain discovery through a sonicwall VPN connection

    how can you get multiple domains to talk to each other through a sonicwall VPN connection?

    ITKE392,005 pointsBadges:
  • Configuring VLANs with ActionTec M1000

    I am attempting to configure two VLANs with a NetGear FS726T switch without success. What I am trying to do is to have one VLAN which would be used by the staff to access to anything on the network and a second VLAN for guests to use to access only the Internet. In a reply to a previous post I was...

    Krused135 pointsBadges:
  • how to configure PA-MC-STM1 card in cisco 7206 router

    I want to know how to configure PA-MC-STM1  card in cisco 7206 router

    ITKE392,005 pointsBadges:
  • how to check the connectivity of internet using blue coat

    today no body  able to brwoes the internet in my orgainisation i dont know what happen  could you please tell me how to check the internet connection if its working fine or not.

    alriyami1110 pointsBadges:
  • Cisco 2801 router noise

    I am having Cisco 2801 router & from last one day too much sound / noise is coming from this router.I have checked & in router showing fan 2is faluty but fan 1 is working..pls suggest solution ..

    ITKE392,005 pointsBadges:
  • I want use a D-link Dir-600 router that will sit behind a Cisco router with 2 vlans

    I have an application where I have setup a Cisco 1841 router with 2 vlan connection's, I want to setup a wireless D-link DIR-600 wireless router on one of vlans so visiting venders can get to the internet without being on my network. Do I need to setup the D-Link router with any VLan...

    Shedman35 pointsBadges:
  • 2 DSLs aggregated to a Cisco 5505 asa router

    I am waiting for our FIOS connectivity and am presently using EMBARK DSL in its place. As an interim measure I want to add a second DSL to get more throughput. 1. Can this be done 2. Should both DSL modems ahve the same static ip from the provider Any help would be greatly appreciated Thx - Joe

    Surfsupjoe5 pointsBadges:
  • Clear completed printer job list

    Hi any one can tell me how can I clear complete job detail in Xerox WorkCentre 232 thanks

    Chetanm145 pointsBadges:
  • Cisco 3750 Switch Script

    I have 50 switches of cisco 3750 POE model. Do any one has a script for Shuting down the POE ports after office hour , which will help to save the power used by cisco IP Phone. If any one have it , please do mail me the link or code on below mail id sunny.sehgal@in.ey.com Reards Sunny Sehgal

    8SU15 pointsBadges:
  • Commands for binding or mapping Layer 2 data to Layer 3 ports

    I have a question concerning Layer 2 and Layer 3 data on the same device. We have a client that will be sending us Layer 2 data streams, but we have to send them to a device that will only take IP multicasts. We will be using a Cisco 7600 Router with a 6700 Switch Card installed. If this is...

    NetworkingATE1,545 pointsBadges:
  • Cable for DTE/DTE

    Hello, I need a cable for two DTE, one is RJ45 and other DB9. The cable should be RJ45M to DB9F and Nullmodem rule. How can I get this cable? Can I make it? Can I use CISCO 72-3383-01 CONSOLE CABLE RJ45 - DB9 for this matter? Regards, Hamid,

    Aryanhr5 pointsBadges:
  • Limited Connectivity in a Network Enviorment

    I have been having this problem on serveral PC's. I have to setup up a new PC on our network and i am getting a limited connectivity error on the NIC card. I have checked all the setting on the PC. I tride to use another PC and i got the same error. I looked into the SP2 error and the recommended...

    Sterling0125 pointsBadges:
  • DNS Reverse lookup zone duplicate

    i currently having a problem with my dns server it always giving error about event id 4515 saying that duplicate zone exit . but i already checked every thing i went to ADSIEDIT and also checked in DNS but still same error , is there any other way to get it solved ...

    Exchange server 2007605 pointsBadges:
  • Optimized network Diagram

    Hi I have two Cisco 3750 redundant switches, a BlueCoat, an exchange server, a microwave connection, I want to connect them to a Cisco ASA 5510, and make a DMZ for the exchange server, Please some one give me an optimized diagram for the connection of those devices.

    Qma15jo55 pointsBadges:
  • Adding local admin rights to a new computer when user has access on all other comps on the domain

    Hello All, Thanks for taking the time to help me with my problems as i am almost finish. I have two things left to accomplish for now and maybe a few more in the near future. My friends company had a Tech that recently passed away and I am trying to help him out with his business. I have done this...

    Wingnut789060 pointsBadges:
  • DNS reverse lookup zone items

    how to recover the deleted items in reverse look up zones. thanks glen

    Glennlejao5 pointsBadges:
  • how i can message a user in lan through command prompt in windows Xp SP2 Os with out any third party software

    how i can message a user in lan through command prompt in windows Xp SP2 Os with out any third party software. Specially through dos commands

    ar348315 pointsBadges:
  • Cisco Router ips & ids

    what are the commands in ips & ids in cisco router? how to configure

    Kaja20048055 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following