• Which transmission media costs the least?

    Which transmission media costs the least?

    NetworkingATE1,545 pointsBadges:
  • Mapped drive will not reconnect on VPN (it used to)

    At work I connect with ethernet and map drives to (2) computers and a "terra" station.  When I am at home, I [strong]was[/strong] able to VPN into these same devices.  Recently (after a possible company update) I am no longer able to connect to the terra station.  I still connect to the (2)...

    SparrowHawk15 pointsBadges:
  • Load effect of rules on the hub transport

    To help stop (or slow down) phishing attempts to our Exch2007 clients, I'm working with Transport Rules. One of the techs had a question though. How much of an effect will these rules have on the transport. Noticeable; negligible; inbetween? Thanks, Ken

    Grube135 pointsBadges:
  • commands for nortel ARN router against cisco 1700 series router

    as i was using cisco router and now i want to installed nortel ARN router in place of that. I have configuration backup of cisco router,so i only want Nortel ARN router commands to configure against cisco commands

    Networkfresher5 pointsBadges:
  • FTP from AS400 converts “£” sign in deal narrative to “$”

    A report I'm FTPing has the "£" symbol on the deal narrative, but when I FTP it to a text file the "£" symbol gets converted to a "$" symbol. How can I rectify this?

    Jrayworth5 pointsBadges:
  • Cisco 2600 Router and Two ISP

    How can configure two Internet LL (Primary and backup)on same cisco router 2600 (2 Serieal and 4 ethernet ports). ISP 1 - 4Mbpes and ISP 2 - 1 Mbps.

    NWEA55 pointsBadges:
  • The most-watched IT questions this week: Oct. 13, 2009

    Here are the 10 most watched questions on ITKE: There’s some great discussions going on ranging from going green to how to create a new network. Go answer a question now and take your shot at winning a TV, or check out the rest of the top 10 on the Community Blog: 1. Going green: Are you feeling...

    Michael Morisy8,323 pointsBadges:
  • cisco l2l vpn on pix 525

    what is the command in pix 525 i want to know bandwidth utilization for my l2l vpn

    Ekansh400 pointsBadges:
  • Configure wireless networks to dynamically switch between leased lines

    Can you send me instructions on how to configure two seperate network setups; a leased line and a wireless network setup to work together? Both are connected to a central network where there is a layer switch. Is there a way to setup the leased line to auto-connect upon wireless failure and...

    NetworkingATE1,545 pointsBadges:
  • Differences between integrated service router and modular access router?

    What is the difference between an integrated service router and a modular access router?

    NetworkingATE1,545 pointsBadges:
  • Citrix Deployment: command line text to hex converter, vbscript, or am I out of luck ?

    Hi everyone, I'm brand new here. Bear with me as I try to explain my issue as clearly as possible... :) My organization is deploying Citrix to around 600 off-domain Wyse thin clients running XP. I am hoping to automate this transition as much as possible, but there are several roadblocks with these...

    John65555 pointsBadges:
  • load balance

    Hi, I have a customer who has taken Global ethernet leasedline as primary link and Ethernet over SDH as secondary from second ISP. Now customer wanted a load balance between these two links? He wants utilise both the links and failover should happen once  primary link is down? customer link is...

    Chanti12075 pointsBadges:
  • which is the best virtualization for my scenario?

    Hi All, We are having 15 desktops used for around 30 users.The users only need to store thier exchnage email account in outlook and will use VPN (window s/thirdparty) clients and need internet. all are running on windows platform.   We are planning to increase the no of users and we need to...

    sumeshbnr1,675 pointsBadges:
  • VoiP

    Is anyone familiar with a low cost VoiP service that allows for call forwarding.  I would like to use the service to track phone calls.  I need to know the number of times the number was called and where the call originated from. Ideally I would like a VoiP service that doesn't bill the minutes...

    Elegolas175 pointsBadges:
  • QSECOFR user profile is not allowed in TCP/IP socket mode!

    I am getting an error message when I try to connect to the i5 with a Windows based query application. QSECOFR user profile is not allowed in TCP/IP socket mode! I read a couple of articles, it might has something to do with an FTP restriction on i5 side. Could anyone point me to right direction? I...

    Chabsta85 pointsBadges:
  • D-LINK MODEL DWA 110

    CAN SOMEONE TELL ME, ABOUT THE MODEL D-LINK DWA 110, I JUST LIKE TO KNOW BY USING THE NETWORKING MODEL D-LINK MODEL DWA 110, WITH THE SAME MODEL AND SAME NETWORKING, SOMEBODY CAN TRACE US OR KNOW ABOUT WHAT WE HAVE DOING SUCH AS DESKWATCHER OR OTHERS SOFTWEAR. IF WE OPEN INTERNET, WEB ACESS OR...

    Network20095 pointsBadges:
  • terminal/printer emulation software

    I am looking for software to run on a PC which will emulate an HP 4100 laser printer so I can receive those documents on a network as a file.

    Obieturner5 pointsBadges:
  • System i Console Solution for 8203-E4A (LAN or Operations Console)

    We are in the process of replacing our development system with a new 8203-E4A and I have no experience with any console other than a Twinax console. I read in the 520/550 Builder red book that there are several options that can be used. I don't see a need to use a HMC since we will not have a...

    hafwhit1,170 pointsBadges:
  • FTP through CLP program

    Hello, I have a script written for 'INPUT' file during the FTP process. The user-id and the password are being hardcoded in the script.To maintain the security I want to encrypt the password alone in the script.May be when the FTP is in action, the password can be retrieved from a file or data area...

    Sris198655 pointsBadges:
  • Print Spooler

    I am installing a Tag Printer Model LP 2844. My problem is that the Print Spooler keeps crapping out on me. I keep starting it back up or restarting than the services are up but nothing prints out. Anyone has any idea?

    Jsuarez145 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following