• Using ISA 2004 to block the majority of sites and allow a few.

    I am using ISA server 2004. In that, I have blocked a few sites. Now our requirement is allowing only few sites and blocking the rest. How can I? Please help me in this regard.

    NetworkingATE1,545 pointsBadges:
  • If my network’s configured incorrectly, how are my computers communicating?

    I have a question regarding communication within a local network. Please correct me If I am wrong: If there are two computers in a local network, Computer (A) and Computer(B), and if (A) wants to communicate with (B) or vice versa, then the request first strikes the router's LAN interface, right?...

    NetworkingATE1,545 pointsBadges:
  • Dependancy or Service Group failed to start

    WHAT DOES IT MEAN WHEN YOUR COMPUTER TELL YOU "THE DEPENDANCY SERVICE OR GROUP FAILED TO START"?

    Dawn7210 pointsBadges:
  • A networking device to add an IP device?

    I want to know if there is a networking device that can be used to receive a device with a IP address (in this case a DVR) and if this device can then have two outputs and each one being able to be seprately addressed. The reason I am asking this is because I am trying to hook in the DVR into an...

    Dstar5 pointsBadges:
  • VLAN route on a stick

    Hello Guys I have some concern regarding my VLAN route on a stick, I created 6 VLAN's on Cisco 1841 router in Ethernet port 0/0 with Local IP 192.168.2.x then I created sub interface in the same ethernet port0/0.10, port0/0.11, port0/0.14, port0/0.15 all VLAN's route to my local default gateway...

    Bsm122045 pointsBadges:
  • How to assign a Static IP on LAN

    i found a static ip from ISP provider. i want to access the internet on server, but problem is that the static ip network is different from my networ. for eg. static ip is-192.168.1.1 and my server ip is- 192.168.10.1 and i don,t to chenge the server ip network. what i do? please Suggest.

    Moti5 pointsBadges:
  • connetion failed ,this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL

    I enabled remote connections in sql server 2005 configuration and services but also it giving same plz help iam trying this from three days

    Shaz255 pointsBadges:
  • Network management solutions. Which one to chose?

    Looking for a network management system that can help with real time issues. Looking for something that has good reporting and is not too costly. What is everyone using?

    JimmyIT1,725 pointsBadges:
  • How best to control Junior Admins

    Hi all, Need to give new member of team Admin rights, but I'd like to know how you all manage your junior admins? I'd like to give restricted rights and have an audit trail. Environments in Use; - Window server 2003 and Active Directory - Vmware ESX + vcentre - Lotus Domino + Notes I guess most of...

    Pandub130 pointsBadges:
  • Reverse DNS not forwarding to ISP DNS

    We have a receiver mail server refusing an email from us with message Received: 553 We do not accept mail from IP addresses without reverse DNS. Our inside DNS seems to have all the entry to answer direct or reverse calls for our email server. It seems that our ISP DNS server doesn't have the entry...

    mystergag30 pointsBadges:
  • Wireless printer on wireless network

    hi folks if i want to add a wireless printer to my wireless enabled notebook[worksation],what do i need?

    Xxx385 pointsBadges:
  • Network configuration

    hi, i am the IT administrator in my office...it is a new organization and we're into service delivery of a software that can back all data on your phone. now, we dont have a network yet and our staff strength is 8 people which includes the CEO,Fin mgr,admin mgr,HOD IT and 3 customer service...

    Lexington5 pointsBadges:
  • how to assign users to a group

    Hi, does somebody know if it is possible to assign users to a specific group for a cache_peer so that the following proxy can decide which domains are accessible for a particular user based on his group? i know this can be easily done with one proxy but here the scenario requires two proxies (the...

    JeremyNorton15 pointsBadges:
  • Cannot view users via workgroup machine on Windows Server 2003

    We have a PDC Windows Server 2003. There are two machines: Machine 1 on workgroup and Machine 2 on domain ABC. When we try to view users in a particular domain via Machine 1 it gives us the desired result. However, when we try the same operation via the workgroup machine it gives us ERROR access...

    WindowsServerATE335 pointsBadges:
  • 2811 router

    sending a fax and stay connected on 40 sec then drops. Can this be an opt missing?

    Jai4305 pointsBadges:
  • Static and Auto Obtain IP Address

    To Put Server Online I Need Internet Connection With Static IP or Auto Obtain IP also ok if ok then how?

    Atharsiyal25 pointsBadges:
  • Which certification would you suggest for a network admin in a telco?

    I am an assistant network administrator in a telecom company, and I want to earn some certifications. I now have a MCP 2005. Which track should I choose next? And how can I start studying for that?

    NetworkingATE1,545 pointsBadges:
  • Are network certification courses worth the money?

    Hello. I am 39 years old. I have no degree and am currently considering a change of career. I am looking at IT as I have had some limited experience in the field of Web page maintenance (html) and flash development (action script) for an online holiday bookings company. However, this experience was...

    NetworkingATE1,545 pointsBadges:
  • What does it mean to exceed frame retry rate?

    I receive a lot of event messages on my controller in regards to frame retry rates being exceeded as well as frame low speed rates exceeded. What exactly are these referring to?

    NetworkingATE1,545 pointsBadges:
  • Adding Clients to a Server 2003 Domain

    I have been struggling with this issue for several weeks now. We have a school network that I am trying to support. I was not there when it was installed and there was no real documentation left behind. !) Comcast is out provider and we have an ethernet cable going from the cable modem to the...

    Yankusbobicus120 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following