• Adding an IP Subnet to a VLan on L3 Switch

    I need help adding an IP subnet to a Vlan, when I attempt to by using the IP address X.X.X.X 255.255... it gives me an error saying it overlaps another VLAN. is there another way to do this? I am on a 3750 cisco switch, IP routing is turned on. Please help!!! thanks in advance.

    Cisconovicenlv30 pointsBadges:
  • patch cable or drop cable length

    how do we calculate max length of drop cable used in ethernet lan.

    Vishal15 pointsBadges:
  • Which is more valuable Degree or Certifications??

    Hello Everybody, I am Varun. I am doing a diploma in Advanced Networking and system security from CDAC. I have done BCA. Now, I am bit worried in deciding that in which direction I should move. Should I go for Cisco certification or MCA. Getting more and more certification is enough or is it...

    V200945 pointsBadges:
  • AP MAC filter as ACL from database

    We have 14 CISCO AIR AP 1242 APs around campus. We would like to do : Have a ACL with MAC address allow from our database or XLS sheet and deny others. I already create all the wireless devices MAC address in xls sheet in place. We are trying to do is: Setup ACL for every APs not locally but...

    CHENS265 pointsBadges:
  • Routing scalability issue?

    What's the routing scalability issue with the Internet? Does IPv6 fix it?

    SearchEnterpriseWAN1,435 pointsBadges:
  • Nat on cisco router

    Hi. i have 2 cisco router which they are connected to each other for VoIP. my question is i want to forward all the data from port 80 to be forward on one pc inside the network. can you please help me on this?

    Azrahedour15 pointsBadges:
  • Load Balancing of Unequal Ethernet Bandwidth

    Is it possible to aggregate and then load balance the unequal ethernet circuits like so: I have two ethenet circuits on my Cisco router. Both have equal costs to the next hop. Ethernet Circuit #1- 200M Ethernet Circuit #2 - 100M Can I aggregate both ethernet circuits so that the total amount of...

    Hcandy5 pointsBadges:
  • how to use parallel port for serial communication

    i want to use parallel port for spi. i dont know how to set phase and polarity for sclk.how to send and recieve data. do i need to shift data synchronized with the clock or the parallel port will do it automatically?

    Amna10 pointsBadges:
  • ip not working

    when i replaced the localhost with my ip address, it showed errror. what I need to do?

    Dipakkp15 pointsBadges:
  • how to connect two Cisco Catalyst 4503 core switches

    i have two 4503 core switch and would like to make redundent

    Mothana55295 pointsBadges:
  • Windows Vista Ultimate 64 bit VPN To Work Network?

    Hi Guys, I just found the hard way that Cisco doesnt have 64 bit VPN Client. i googled a bit came up short.....every search was going towards install XP with Dual Boot and Use XP for work. I need your help in setting VPN using Vista's Network Setup. Start -> Connect To -> Setup a Connection...

    Prashant Pathak5 pointsBadges:
  • Second NIC card won’t stay connected

    I came in this morning to find my file server down. Must have had a power outage over the week end. It's connected to a UPS that was also down. I found DNS Client was disabled on the server. I set it to Automatic. I have 2 NIC cards but now for some reason I can only have 1 endabled at a time. I am...

    Giftbox145 pointsBadges:
  • wants google chat block windows server 2003 domain controller

    I wanted to block Google charting and Google talk without interruption gmail site. could you please help me. I have domain controller installed 2003 server  and using routing and remote access for internet sharing for client PC. Thanks for help

    Hirachilwal25 pointsBadges:
  • Can I prevent OSPF from advertising a specific network on an interface

    Is there a way to tell OSPF to not advertise a specific network on a spefic interface without stopping the adverts of other networks? Example Router has 5 interfaces F1 is a link to another router F2 is a link to another router F3 = netB F4 = netC F5 = netD I need nets BCD to be advertised out F1...

    ITKE439,630 pointsBadges:
  • routine of network security engineer

    what are the daily routine of a network security engineer in a compney, form morning to evening?

    Ssssingh10 pointsBadges:
  • Transmition Security Control in Connect:Direct

    What is the Transmition Security Control that uses "Connect:Direct" ?

    Menkar5 pointsBadges:
  • Pims Support ?

    i was wondering if there is any pims accounting software support here , i have a client using pims but its too slow when two pc's or three are connected , but the network is fine , ping and everythin is good with network , any suggestion please ? ?   thanks

    Mayssam96150 pointsBadges:
  • Bandwidth-controlling

    I have Fiber link for 6 MB with 2921-Router. I wan to segreegate bandwidth 4/2 for 2 Different Department. I have also 2 Catalyst 3750 switch for each department. I need to fix bandwidth 4/2 with access list. Please give me the solution?

    NetworkBandwidth30 pointsBadges:
  • Obtaining IP address in Xen

    After finally got XEN working, the part I've been struggling the most with is finding a way to get XM to report the IP address of the virtual machine it started up. The VM was in DHCP mode. I'm guessing I could find this out using dhcpd logs (by looking up the mac address), but I'm not sure if...

    ITKE439,630 pointsBadges:
  • Network Design Questionnaire

    I am a student I have a project which a program to design a local area network to a single building. I want to know the questions that I will bring to the user and used in the questionnaire

    A1988ns15 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following