• Difference between BOOP and DHC protocol

    What is the difference between BOOP and DHC Protocol?

    pavankumarpagadala5 pointsBadges:
  • Setting up switches and VLANs

    I am going to an interview that requires me to set up 3 switches, VLANs and do some routing. Do you have any ideas what that might entail?

    pslang10 pointsBadges:
  • What are the steps to configure VLAN SW2?

    What are the steps to configure SW2 VLAN from router? I assume I need to get trunk first into router then config VLAN2 into port towards switch, then VLAN switch config port in and out then SW2 same?

    pslang10 pointsBadges:
  • LAN Design of 120 computers

    I need solution on the best possible way to implement a simple design of a local area network of 120 computers.

    chiboy15 pointsBadges:
  • Getting IPv4-Mapped IPv6 addresses

    Hi. Can someone explain exactly what an IPv4-Mapped IPv6 address is and how it is possible to map IPv4 addresses to IPv6 addresses? Is there some kind of program/software/service that can do this for you?

    SearchEnterpriseWAN1,095 pointsBadges:
  • how do I boost range of wireless -N router?

    I have a Linksys WRVS4400N for my home office and it works great for inside the house. I also have a gazebo about 120 ft away from the router that I like to sit out on in nice weather to work. I get very low reception out there (1/2 bar) and would like to boost that. Will a WAP4400N accomplish that...

    NaplesKD5 pointsBadges:
  • DNS suffix and default gateway dissappeared

    I have a simple wireless network with a desktop and laptop. Everything was working just hunky dory. I had Hamachi set up on the laptop, then recently uninstalled it. After the uninstallation, I can no longer access the internet or my network from the laptop. If I do an ipconfig, the DNS suffix and...

    Clayford0 pointsBadges:
  • How to use WebDAV to access a user’s Exchange 2003 inbox

    I'm trying to use WebDAV (also using .NET) to get a listing of all the emails in a user's Exchange 2003 inbox and then also get the properties / contents of each email. Would this be possible? Thanks so much!

    ITKE352,565 pointsBadges:
  • How does routing protocol work?

    Hi Engineers, My name is vinod, I would like to no routing protocols, like how RIP, IGRP, EIGRP, OSPF and BGP works and what is advantage and disadvantage of this protocols, specifically what is route poisoning. I will appreciate for any kind of answer and any attachment or links will also help me....

    Hacky5 pointsBadges:
  • Can we use a Windows Server 2003 configured as a router to do qos when the switch does not support it?

    Can a Windows 2003 server be used as a QOS device to prioritize packets on the network to prevent VOIP latency? The current switch and gateway do not support qos.

    Karl Gechlik9,860 pointsBadges:
  • Is it possible to limit or restrict access for VPN clients

    Is it possible to limit or restrict access for VPN clients using an access-list and if so how to do it?

    Jji0025 pointsBadges:
  • Creating multiple files from a single code base and FTP.

    This is a two part question. I'm looking to use a COBOL program to create multiple files in a standard library. Is there a way to programatically write multiple files from a single program. I had someone indicate that I could call to CL instream and actually create multiple files on the fly. Second...

    Bew30 pointsBadges:
  • Configuring Qtrunk ports on FS728TS Switch

    I need to connect two switch FS728TS. I have 3 VLAN in each switch. How can I configure the common ports of every switch to achieve the 6 VLANs traffic flow on this link?

    Tecuntecun5 pointsBadges:
  • Cisco Switch 3560 assigning IP address manually

    I have a Cisco 3560 Switch. How should I define the IP address and subnet mast through telnet? I cannot access express set up mode. I want to assign the IP address and subnet mask manually through telnet. Please help me. Thanks!

    Rabbanimd5 pointsBadges:
  • Differences of IP and IPX

    What is the difference between IP and IPX routed protocols? Particularly in their protocol stack and addressing scheme?

    Sano5 pointsBadges:
  • Dual NICs causing sync problem

    I have a computer with 2 NICs each pulling an IP from a different DHCP server in order to access two different networks. The computer syncs with Retrospect on one server and only needs file access on the other. The problem is that periodically the computer cannot sync, leaving it unable to get to...

    Guz5 pointsBadges:
  • Anyone know of a free simulator for Cisco router and switch configuration?

    Can anyone recommend or suggest a free simulator for Cisco router and switch configuration? Thank you!

    NetworkingATE1,545 pointsBadges:
  • How to install 2 virtual client with Windows 2003 Server

    Hi, I would like to know how to install 2 virtual client with Windows 2003 server? Do we need a KVM switch with additional configuration and license?

    Retrohydra5 pointsBadges:
  • IPFW Bandwidth Management

    Hi! I have recently configured my gateway in freebsd by using IPFW but the problem is this that I'm facing bandwidth congestion so I hooked myself with google and found that DUMMYNET can satisfy my desires, anyhow when I sue the dummynet than its not going according to my idea, and I faced a number...

    Techartist20 pointsBadges:
  • A+ Certification

    What is a good site to get practice on taking my A+ Certification test?

    Player310 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following