• Internal LAN domain on Speedtouch 716

    Hi Does anyone know how to alter the internal .lan suffix on my speedtouch router? Not only the device itself is reachable with speedtouch.lan but also all DHCP devices receive a .lan suffix. I want to set up an internal domain name. Any help much appreciated!

    Thevoyager4310 pointsBadges:
  • Cisco 3524 and 2610 vlans

    Hi im trying to get my head round if this is at all possible. i have a load of 3524 switches and a single 2620 with 1 ethernet port. is it possible to have setup in this configuration with the equipment i have this part i am ok with and understand vlan6 - switch management 10.0.6.1/24 gw...

    Harmlessworld5 pointsBadges:
  • Xenserver 5 with multiple NICs

    I have 8 NIC ports available on my Xenserer host, with two ports connected to the network. However, I cannot seem to utlize the second NIC port for my Xenserver VM Windows 2003 guests. It can only use the same port that I use for the Xencenter managment console. Is there something I need to...

    Virtualadmin5 pointsBadges:
  • VAR

    How do you use VAR file compression to break up a large file to be sent over the net via FTP?

    Dawooding20 pointsBadges:
  • Career and certifications on Microsoft Platform

    I am CCNA, MCP certified and doing MCSE. I am looking forward for SMS and Exchange Certifications. Please advise on what should I do for the best in career? any other course recommendations

    Vparmar5 pointsBadges:
  • What is meant by SLL? Can you explain? (read at last line of this Cisco paragraph)

    Cisco ASA 5500 Series adaptive security appliances are purpose-built solutions that combine best-of-breed security and VPN services with the innovative Cisco Adaptive Identification and Mitigation (AIM) architecture. Designed as a core component of the Cisco Self-Defending Network, the Cisco ASA...

    Fayas65 pointsBadges:
  • How to create VLAN with this Cisco configuration

    Dear Sir, I have 1) DNS & Exchng Server 2003 with DHCP enabled Win2003 Standard Edtn SP2 , 2) ISA 2006 3) Trend Micro Antivirus Server. I have to create VLAN for 3 Dept. with having 3750 Cisco Switch as routing ( Trunk ) Using 2950 Cisco Switch 2950 VLAN10 High management VLAN11Low management...

    Abduljaleel5 pointsBadges:
  • How to allow file sharing for child domain?

    I am adding a child domain to an existing domain. How do I allow file sharing between the two domains?

    Cliffb705 pointsBadges:
  • Cisco Catalyst WS-C6506 – link termination question

    I need Help for one of our solution on our site. Senario We have a simple campus network on our site where we have Core, dist.and access Switches. Two Core Switches that are C6506 having redundancy. CAT6507 Chasis WS-C6506 SUP WS-X6K-SUP1A-2GE MSFC-2 WS-F6K-MSFC2 1000BaseX Ethernet WS-X6416-GBIC We...

    Chitah10 pointsBadges:
  • cisco 5505 configuration from netgear saved config

    Need to switch from netgear to cisco 5505 to do B2B tunnelling-How do I configure new routers from saved config?

    Hubigpies5 pointsBadges:
  • windows

    can I use the open command to open a unc path to a windows box?

    FredGarvin5 pointsBadges:
  • what are the basic things to access resources in the main office from the remote Branch office and vise versa?

    Hello Everybody. I am a Fresher, cisco certified network associate and i just want to know the basic things to access the resources in the main office from the remote branch office and vise versa. what are the steps to setup a router? Do i need to get IP address from ISP within the same network for...

    Fayas65 pointsBadges:
  • Cisco Networking

    How can we provide load sharing on single router of two ISPs. plz let us suggest on the same.

    Bhupendra205 pointsBadges:
  • Packet Filtering information required

    Hi, One of our PC which is running on REDHat is sending SMTP packets to the firewall. Though the firewall drops the packet, it logs the same. We wanted to know : 1. IF we have to run a packet capture tool, where do we run ? - on the firewall or the PC ? 2. We ran network monitoring tool, but did...

    Jagdish60 pointsBadges:
  • Connect Wireless G ADSL2+ router with Access Point

    i have a d-link wireless g adsl2+router dsl-2640u connect direct to phone line with : ssid=blink ip= 192.168.1.1 wep=0022b0c2cd61 so, i dont have the user name and password for administrator to logon and change the wep code. but,when i connect to access point, the wep of access point didnt take the...

    Army125 pointsBadges:
  • Cisco 2811 VLAN Usage

    I inherited a network that has a Cisco 2811 router setup with the following: interface FastEthernet0/0 no ip address no ip route-cache cef no ip route-cache duplex full speed 100 ! interface FastEthernet0/0.18 description Data VLAN encapsulation dot1Q 18 native ip address 10.221.18.1 255.255.255.0...

    Zwitter1535 pointsBadges:
  • Cisco: Setting a VLAN across a network

    hi,newbie here :) I am working on Packet Tracer 5.0 and I want to setup 2 vlan's that spread across a network. I attach the view of the network: 2 of 3 hosts on switch 1 belong in vlan10 and the other one belongs to vlan20. Likewise, 2 of 3 hosts on switch 2 belong to vlan10 and the other one...

    Teo20 pointsBadges:
  • WLAN Controller

    Hi Guys. Can anyone give me somemore information about the WLAN Controller? Can one WLAN controller manage can perform tasks for many Access points and networks?

    Rahul Shrivastava330 pointsBadges:
  • Adding static route on Windows PC from different network segment between known routers

    Network looks something like this: PC (10.65.68.100) ---- Router (10.65.68.1/10.65.67.1) --- Router (10.65.67.67) --- Destination (10.0.1.100) I use something like this: route -p add 10.0.1.00 mask 255.255.255.0 10.65.67.67 My router knows the way to 10.65.67.67, as evidenced by my ability to ping...

    IrishLoop35 pointsBadges:
  • Becoming a networking or database admin with a business information systems degree

    I have a bachelor's degree in Business Information Systems. I can't seem to find a job in IT. I graduated in 2002. I worked as a security officer while going to college. I'm interested in networking or database administration. If you were me what would you next?

    NetworkingATE1,545 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following