• Sending files to AS/400 from Unix

    I am trying to send a file from Unix environment to AS400 using Connect Direct, can somebody help me out with some sample scripts / commands for the same. Also is there is some way to confirm the connectivity established between the servers using Connect Direct, is there some command to find that...

    Johnsykunju35 pointsBadges:
  • subnet question

    some explanation to this question would be beneficial, the scope of this subnet is 136.0.0.0/22 a file and print server are to be implemented on this subnet, exclusion ranges of the first 10 addresses have been created. required to configure the static IP properties for this new computer. the...

    Golfer2110 pointsBadges:
  • DHCP server

    when install 2 dhcp server in my domain group,so how can i provied ip address in my domain.... plz reply

    Adnanbarwaniwala20 pointsBadges:
  • the all pc connect the enternet and not connet the one ps keep solution for answer.

    one bsnl modem 3port swcith invalid for modem.conect the single pc .to use in this pc for enternet.and 2nd port to connection to another swtich for 24port switch.24port switch connection for 23 pc and not dispaly in this enternet page.and i,am set for ip address to ping this every system.to ping...

    98538588345 pointsBadges:
  • Cannot access shared folders remotely

    Hello, I have a shared folder (e.g. MyFolder) on a Win XP SP2 computer (e.g. MyPC) with share permission for 'Everyone' having full control and security permission for 'Users' and 'Administrator' of the computer (MyPC). When I try to access the shared (MyFolder) from another computer I get the...

    Eswaranl165 pointsBadges:
  • Security of MAC-based wireless access permissions

    A colleague and I were recently debating whether it's an OK policy to allow wireless access based on users MAC addresses. He has a small office where most people are wired, but a few are wireless and are part of that notorious gang that can't be bothered with passwords. He also said that basing...

    ITKE361,880 pointsBadges:
  • FTP QUOTE RCMD … invalid subcommand

    I am trying to run QUOTE RCMD (AS/400 CL COMMAND) and always get invalid syntax error. I have tried many CL commands. For example, this command CHGOBJD OBJ(LIB/FILE) OBJTYPE(*FILE) TEXT('New obj description') I ran QUOTE HELP and RCMD is listed as a valid FTP command on remote system. I ran QUOTE...

    CoderHal360 pointsBadges:
  • FTP Connection Error ISA 2004

    Dear Sir; Where we have hostaed our domain thay appliy Protocol TSL/SSL  for FTP.  They are using Linux server.  Now we are unable to connect ftp from filezilla client or any client. They  suggest us to try Filezill with below steps, Kindly follow below steps to use FileZila over SSL/TLS: 1....

    BhupenJesalpura10 pointsBadges:
  • SYMANTEC ANTIVIRUS

    From symantec console center a computer status showa that it is missing definition and when i try to enter the virus definition manager or any other option a msg come sayn that symantec antivirus cant communicate with that pc The network server is windows server 2003 and The OS of the client pc is...

    Dawdaw210 pointsBadges:
  • IP Address reverting back to old address

    I have changed the IP address on one of my member servers every hour but it reverts back to an old address. I have 4 DC's and they are the only DNS machines in my network. I have tried each DC separately buy still have the same issue. Any help

    ITKE361,880 pointsBadges:
  • setting up a wifi service to send signal out to public

    my friend is setting up a wifi service at a company that wants to send the signal 2 to 3 miles so people can login and also business can keep track of the traffic ! the problem is we can see people logging on but the internet will not connect from our end so it won't let them on it's some stage...

    Shooshay5 pointsBadges:
  • Correctly remove 2003 domain controller from network

    I'm going to make preperations to remove a domain controller out of our companies active directory tree. This server is windows 2003 domain controller located in a remote office connected to my location where the main controller 2003 controller is located with a T1. I'm going to remove the remote...

    Jdmailny25 pointsBadges:
  • WEP key for WLAN ( 4 mobile phone use )

    im trying to connect to a WLAN using my mobile phone. When i try to browse the web im asked to enter a WEP for WLAN. what does this mean and what should i do?

    NOMADIK5 pointsBadges:
  • The Administrator Password of DC………

    Hi, What's the solution if I lost the password of my DC(Win Server 2003)? Thank you. ----- Regards Mahnaz

    Aliyani265 pointsBadges:
  • Access Barracuda Balancer admin panel from another network

    I'm not much of a network person and have just been thrown on this since our network guy just left and we're looking for a replacement so I apologize in advance. I'm in the process of setting up a Barracuda Balancer 340 in front of our main web server. Currently we have 1 live web server and one...

    Moej0j0j05 pointsBadges:
  • Has anyone setup a Konica Minolta bizhub MFP on an iSeries system?

    I have setup a printer device on a clients iSeries that is a Konica Minolta C280 MFP and it will print but indicates a change in forms message on the printer display. Has anyone configured a similar model before? I believe I will need to create a WSCST object for it, but I don't know which print...

    hafwhit1,155 pointsBadges:
  • OSPF (ASAP)

    Hello  everyone, Here i have problem with my OSPF network problem. I have post  The detail below that explain the configuration i have implemented. THe problem is that i can ping from PC0 or PC1 to the backbone router. but i cannot ping the other side of the area 0. Also i can ping from Router2...

    Jale36535 pointsBadges:
  • Batch ftp text line

    I have a pgm which generates ftp-statement to a sourcefile for batch execution. I have implemented a logging function (saves the ftp-source and corresponding execution log). I want to be able to add a line of text so the generated source statements have some kind of ftp-statement that actually does...

    DanTheDane2,555 pointsBadges:
  • os390 to apple xserve file loses one byte

    when transfering files from the os390 to an apple xserve the file comes up short one byte, same file from os390 to windows or linux works great. how do I fix this?

    Granpatex5 pointsBadges:
  • Security concerns around .11n Networking?

    I've heard a lot of conflicting reports around whether .11n actually is much more secure than its .11x brethren. Any first-hand experience in starting to deploy it,and any tips on whether I can rest easier at night with it over a Ethernet getup?

    ITKE361,880 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following