• What are the similarities in Cisco and HP ProCurve switching protocols?

    like layer 2 protocol in cisco called VTP , while in hp procurve is called GARP , I need to know the other similarities in both for layer 2,3

    Henno5 pointsBadges:
  • Setting up Cisco 2950 switch

    Hello, New to itknowledge exchange... I have a hand me down Cisco 2950 12 port switch. I currently have assigned to my Cable Modem4 Static Public IP's Note: Not real but used for example. 70.66.131.1 70.66.131.2 70.66.131.3 70.66.131.4 I run 3 servers in my basement all of which I have configured...

    Perkster5 pointsBadges:
  • HTU-E1 Leased Line Modem

    hi,can anyone tell me how to take loop test on HTU E1 Leased line modem to test physical connectivity

    Xevier0 pointsBadges:
  • higher bit rate

    Can you please help in explaining technically how the offered transmission speeds of the Internet Provider could achieved higher bit rates than the theoretical rate of 64Kbps.

    Anoy15 pointsBadges:
  • what is this cli response “&&”

    from the CLI of a juniper firewall, when I ping an IP address, I get this response "&&". what does this mean?

    Bahlezi140 pointsBadges:
  • Network infrastructure maps

    Do you or your team maintain updated network infrastructure maps? How often do you access them and for what purposes?

    JennyMack4,280 pointsBadges:
  • Cisco router password

    I have 1841 cisco router and I forgot the password, so how i can reconfig the password agin

    Mohadbazzi47170 pointsBadges:
  • T1 Distance

    can a T1 be sent 300 meters without a repeater?

    Indo5 pointsBadges:
  • internet layer protocol

    which protocol work at the internet layer and is responsible for makeing routing decisions

    Go20 pointsBadges:
  • seeking formal definitions of the software ‘ilities’

    anyone where I can source a definitive list of defintions for the software 'ilities' e.g. scabaility, reliability, availability, stability, security, performance thanks

    Gcronin5 pointsBadges:
  • Can you combine two 64 ISDN BRI channels into one 128 line?

    We have two ISDN lines of 2b+d (BRI) channels. The objective is to get a single B Channel (64) from one ISDN line and another B of 64 from another line and combine it to 128. We are using Cisco's 2621XM router. Can we do that? Is it possible to combine two B channels from different lines to one 128...

    NetworkingATE1,545 pointsBadges:
  • Can’t connect D-Link media converter with Cisco switch 2950

    I am using Cisco switch 2950 connected with a D-Link media converter. When power is reset, that switch is up but the port connected with the media converter is down. After I reset power of the media converter, the link comes up. What's going on here, and how can I fix this?

    NetworkingATE1,545 pointsBadges:
  • Is it possible to access the internet through a wireless repeater?

    I want to plug my D-Link DWL-G710 Range Extender into the Ethernet port of a PC that is without any wireless network cards, and access the Internet through the range extender connected to the Ethernet port. Is this possible? How do I do it?

    Abrahamchapman5 pointsBadges:
  • What are core areas IT hiring managers are looking for?

    I've completed A+, and I'm about to take my Network+ test in a 2 weeks. If you were a hiring manager that took notice to my A+ and Network+, what are 3-4 of the "most current core areas" and "strong technical gifts" that you would use to rate me as an asset to your team or any organization's team?...

    BrentSheets6,925 pointsBadges:
  • VMware guests network traffic

    If I have a iSCSI target server and a regular Windows 2003 server on the same host, will the iSCSI network traffic between the 2 VMWare guests stay internal or does it actually somehow goes out and back in.

    ITKE346,365 pointsBadges:
  • Is virtual sensor a proprietary of Cisco?

    [o:p]Is virtual sensor a proprietary of Cisco? If not, then could you tell me the name of other companies which are using virtual sensor in their IPS? [/o:p]

    NetworkingATE1,545 pointsBadges:
  • Cisco Networking

    We have Cisco 4506 Switch, At one incidence it got down due to uncertain power failure. I dont know how to boot it again when power will up

    Ekansh400 pointsBadges:
  • Is there a way to configure the network adapter on Windows Mobile 6?

    Is there an automated way to configure the network adapter on Windows Mobile 6? I would like to configure the network adapter so that it is in ad-hoc wireless mode so that way the desktop and Windows Mobile device get paired automatically. [o:p][/o:p]

    NetworkingATE1,545 pointsBadges:
  • What type of cable is suitable for an RS-485 interface?

    This is a serial specification and as such is going to be dependent partially on electronics.  Cat 6 is better balanced than Ccat 5, and I am a big fan of shielded systems for a variety of reasons.  I would suggest, however, that you discuss this with the active supplier.  Cabling is backwards-...

    NetworkingATE1,545 pointsBadges:
  • VPN Pass-Through Cisco 871

    Hi All, I'm trying to setup VPN pass-through on a Cisco 871 router.  I have to admit, I'm not very knowledgeable on VPN, let alone doing it on a Cisco router.  I referenced a Cisco document building this config, but can't seem to get it to work. Here's where I am currently at:  I can access the...

    Nfantis55 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following