• NIC Bridging on VM problem

    I have a ESXI 4.0 host with 4 nics setup for teaming (fault tolerance and load balancing). I have 2 vms setup on the host, when I setup bridging using 2 or more nics on the vm, the bridge nic shows bytes sent but 0 bytes received and the physical nics show sent bytes 0 and bytes being received. I...

    Reggies90 pointsBadges:
  • cisco 7961 phone loads

    on a cisco 7961 phone which tftp flash: ............. loads are needed to run on callmanager express on a cisco 3825 router?

    Spc5 pointsBadges:
  • Wireless Device Access

    I have COMCAST High Speed Internet. The first device connected to it is a Vonage Motorola Voice Hub, and then a Linksys Wireless DSL/Cable Hub. Is there a way for me to access my wireless TIVO devices across the Internet since their new addresses on the Linksys are default 192.168.1.*?

    Itsquire5 pointsBadges:
  • we have 2008 and the Dr is wanting him, his PA and office manager to be able to log in at sametime

    Server 2008 We have a madical program running on the server and the Dr would like at least 3 to be able to remote into the server to run that medical program... how would we acomplish this? Please send me info to frenchc1@aol.com

    Frenchc15 pointsBadges:
  • VPN on Netscreen SSG 550M

    Can someone provide assistance for setting up VPN connections (site to site and Remote access) on a Netscreen SSG 550? I've read all the docs, forumes etc, but not evenusing the Juniper VPN client will get me connected successfully. Thanks!

    JAR5 pointsBadges:
  • how connect remote site users to main office through isa server 2006

    our main office subnet 198.73.0.0 - 198.73.255.255 we have we have 2 domain controller ,exchange server 2007 , isa server 2006 . symantec antivirus . all users in the main office connected to the domain and dhcp clients all connect to the internet through isa server as a proxy server isa connect to...

    Essam10 pointsBadges:
  • SLED 10 does not boot GRUB properly post partition expand

    I recently installed a NIC and while doing so, was not aware of the space required in my system partition, hda5, with added files. After reaching 40KB, I terminated the NIC install, and ran Gpart software to expand the partition. This was completed successfully and upon rebooting, the system...

    Datatoo5 pointsBadges:
  • how much does vpn cause BW degradation

    Hello, my company has two branches connected through a wireless link that is not secured, my question is if I use DM-VPN how much would the BW be affected??

    Kaagai5 pointsBadges:
  • NIC Bridging

    Should I use nic bridging on the vm guest that is on a single vlan if the esxi 4.0 host nics configured for teaming? Why or Why not?

    Reggies90 pointsBadges:
  • the time taken for a file to be transferred

    hi i've got a 100MB file to be transferred over an HSUPA mobile broadband network with a throughput of 4Mbps, and i need to calculate the time taken for the file to be transferred and to show my working for the calculation please help thanks

    Geani5 pointsBadges:
  • Ldap Load Balancing

    Hi, i have a cisco CSS which can balance htttp, tcp and udp protocols. Im trying to balance ldap connections between 2 servers using the tcp protocol but its not working, i´ve read that this is possible. Is there somone that can help me with my cisco load balancer configuration?

    D34095 pointsBadges:
  • new to IT looking to improve & make career in networking

    hello expetise , myself being a student of 3rd yr computer engineering , actually i m not good @ language so suggest me course detials in network or system management ,what kind of basic should i have that will help me in course + referr me some books online to bulit my base? , hope your reply as...

    Udit10 pointsBadges:
  • a s/w to design an interface which must initiate some actions and have backend connectivity

    Hi, I need suggestions! Please advise on what software to use for designing an interface. This interface initiates some actions and it must also have backend connectivity. the only thing that i want is for this thing to be NOT browser based

    Siri55 pointsBadges:
  • Network Connection Gone Windows Server 2003

    i used trogan remover scan and registry easy scan on my primary domain controller when i was restart my sever. my local area connection icon are missing and services are stopped like network connection,netlogon,dhcp,tcp/ip and other.how i correct this problem sorry i forget to add that when i try...

    Ajeet20 pointsBadges:
  • Domain creation

    we have a private LAN where all computers are on a work group,but now i want to make a domain in my LAN and also want to connect the computers to it,so what can i do to accomplish this please give me the steps breifly?

    IT Executive5 pointsBadges:
  • Microsoft Outlook and VPN Clients

    I have users that VPN to the corporate network to check their email through Outlook 2003. If they are using the Microsoft VPN client they can get their email. If they use the Cisco VPN client they get error messages in Outlook. Is there something that I need to configure on the Cisco client? Users...

    Jdleon85 pointsBadges:
  • How can i build a gateway

    My company has a software that they want it connected to the Exchange . We contacted the exchange and they said we need to build our gateway and they gave us the specifications. Kindly give me some information on how gateways are built Thank YOu

    ITmadam5 pointsBadges:
  • Network forensic tools

    What tools do you use to perform network forensics? Do you have any favorites, and why?

    JennyMack4,280 pointsBadges:
  • Well Im stumped about these Access points

    Ive been working on a hotel for about a week now. It had a Radius server I assume but it went down before i could check with corporate(long story) anyway the hotel has 16 access points with static IPs on the site map one says tx and other rx which is send and receive these 2 went down and i do not...

    PCMEDICS45 pointsBadges:
  • Problem bridging nics that have been teamed on ESXI 4.0

    The NIC teaming (Load Balancing) is setup on the ESXI 4.0 host, and when I attempt to setup bridging on the Windows 2003 Server VM guest, the VM stops communicating.

    Reggies90 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following