• Two exchange servers on one WAN. Emails are being kicked back

    New location with its own exchange server was added to WAN now when sending emails to this new location emails are being kicked back. The exchange servers are on diffrent LANs but on the same MPLS Network Cloud. Both can ping eachother through the MPLS cloud. Thanks

    Rortiz12065 pointsBadges:
  • forwarder question – DNS

    Hello   As part of a systems migration to RA Airways I am required to to remove RA subdomains from our DNS (that we were formerly authoritative for) and forward them to our Untrusted DNS which then on -forwards to the RA net DNS servers for the correct (un NAT'd) resolution.   I am doing a trial...

    Richsark5 pointsBadges:
  • Enable SSH

    Hi All, I have bought a new c3950 switch, what should i do to enable ssh service for the first time.Should we install cryptographic image if so how to install it.

    Vptechie70 pointsBadges:
  • How should be through to get a cisco certified network job?

    I am a desktop/pc technical support engineer with 7 years of work experience on windows os and basic network operations, now i want to be a network professional as it is my dream from my graduation. i am now certified with CCNA, i need help from you to get a job in this profession. how should be...

    Myfirstjob10 pointsBadges:
  • Remote Acess VPN problem on ASA 5540

    Dear I have configure remote access VPN on asa. i have assign ip pool for remote user same as inside subet ip scheme.from remote i can able to make VPN tunnel with asa outside interface.at remote i can get ip address from inside ip pool but i cant able to ping inside network resources.then try...

    Jatin7075 pointsBadges:
  • dynamic routing and static routing

    when is dynamic routing used?  And when is static routing used?

    Billdollar5 pointsBadges:
  • How to install the passthru server?

    Dear domino experts, I've some problems. Currently we are trying to setting up one more server to be used only as a passthru server. In order to install a domino server to it, may I know do I have to select "Set up the first server or a stand alone server" or "Setup an additional server" ? I've...

    Anevil140 pointsBadges:
  • Cisco Network

    I am using Cisco Packet Tracer 5.2 for study, it seem to be good. I have configure Intervaln routing on 3 coreswitches which is workign fine with vast topology. I tried to place one router 2811 as a firewall between my wan and lan. But i am not able to ping from router to core switch Please suggest...

    Ekansh400 pointsBadges:
  • TCP/IP Timeout

    I am using Client Access 5250 emulation connecting to a model 270 at V5R2. The host has a public IP address so there is no VPN, etc. After 5 minutes of no keyboad activity my job is disconnected. Does anyone have any ideas on what I can do to keep my job active? Thank you.

    LBurkett99830 pointsBadges:
  • How to create Hot Folder to automate printing jobs?

    Hello, All I have a network scanner only (it is not all-in one)that I would like to use it as a copier too (it is sitting next to Network Printer). I have set it up so the users can scan documents and select a shred or personal folder on the server to saved the scanned documents (PDF format) I...

    AsgharE35 pointsBadges:
  • how to map a network drive on server 2003 to vista machine shared folder

    How do I map a network drive on a windows server 2003 machine to a vista machine with a shared folder. I get an error that says network path not found and that the server 2003 does not have rights. I am logged in as the administrator. I can ping the vista machine.

    MiloGeek5 pointsBadges:
  • NT 4 to 2003 local server migration

    I am attempting to migrate a VERY OLD FTP server running on NT 4 (IIS4) to new hardware running 2003 R2. I am currently using local accounts on both servers as these are not connected to our AD environment. I am able to migrate the IIS FTP sites but am needing to migrate the corresponding NT...

    MicJ155 pointsBadges:
  • Ping Issue across three routers

    I have a network of three routers.Router A is pinging Router B & Router B is pinging Router C but Router A is not pinging router C.What can be the problem???

    Sayub40 pointsBadges:
  • laserjet 6L print a completely black page

    Hi all, I have this printer that is printing a very black page even when its a test page.Before this happened I had removed the cover as the printer showed an error (of either printer door or catriadge missing) and I realised that the component that guides the door sensor was out of its position...

    Joshuu0 pointsBadges:
  • Cannot open website

    why i cannot open a specific site from my desktop but it opens up on the dhcp server within the same network.The same site can be accessed easily from computers on other networks.

    BPandey70 pointsBadges:
  • network problem

    i have 60 systems in lan with domain controller of w2003 along with netgear router with defaulty gateway 192.168.1.1 all are pinging with default gateway but some systems are not able to connect default gateway and to some specific ip ip 192.168.1.10 but these systems are working with domain...

    Bluesoft265 pointsBadges:
  • Assigning IP address through policies

    For one of the small businesses I support, I have set up an Rsync backup from their office server to one of the managers home laptops. I did a couple of trial runs but on the first real run which was over a weekend, the backup failed. I went to retry it but could not connect to the laptop. When I...

    OwenAmbrose1,930 pointsBadges:
  • Ethernet Controller

    Hello , i have a huge problem with a mainboard i think.....i cant get a driver for ethernet controller on a [strong] Motherboard ID    09/20/2001-8363-686-K7VZAC-00 Motherboard Name    ECS K7VZA     Front Side Bus Properties    Bus Type    DEC Alpha EV6 Bus Width    64-bit Real...

    Thoxickid5 pointsBadges:
  • Oppurinities in IT field

    HI there,   I am Dilip, Having 6 years Experience in ISP Company, working as a Assistant manager. I have done he CCNA,ITIL. and doing MBA (distance). I would like to Switch over to more specific carrier in IT...i like to work on more of managerial things and not on core networking.What would be...

    Strong10 pointsBadges:
  • Two Subnets – Three Routers + DSL Modem

    Is the following setup valid for creating two subnets (192.168.2.xxx and 192.168.3.xxx) that both access a single internet connection but are isolated? ROUTER A WAN --> DSL Modem ROUTER B WAN --> ROUTER A LAN  ROUTER C WAN --> ROUTER A LAN  Settings: Router A  WAN - PPoE, etc. etc. LAN...

    Hashlock5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following