• How to configure wan/ lan in router 3700 series

    How can i configure WAN and LAN in IP addresses with Ip Addrese of provider is IP: 114.198.149.34                SM: 255.255..255.252                GW: 114.198.149.33                DNS1: 114.18.148.3                DNS2: 202.127.128.2 And...

    Tatol5 pointsBadges:
  • cisco 1721 router install

    Our small company's new IT purchase was a Cisco 1721 router to be connected to 4 ports from our DSU/CSU T1 line. Currently we use a cable modem connection but I am trying to establish a second connection that users could take advantage of as well. My first goal is just to connect a desktop to the...

    Permits0 pointsBadges:
  • Prevent *DTABASE Server From Auto-Starting

        After we perform our weekly IPL I would like to prevent the *DATABASE server from auto-starting when TCP/IP is started until after we have completed our weekly processing.    I don't see this as one of the TCP/IP applications that you can change to prevent auto-starting.    We run the...

    Batman471,050 pointsBadges:
  • Help Removing Wireless connection in a Gatewat T-Series (MSVistahome)

    I have lost the facilities to completely remove a wireless connection router ... LOL Some time ago I do remember doing this task, but I have worn this path down to rock running in circles on this one trying to find & remove it. ---From control panel/network & sharing/manage Wireless I get to...

    T Mike10 pointsBadges:
  • Sending Email Solutions

    Currently we have a POP3/SMTP email server (IMAIL).  Our end users connect to it using Outlook.  If we are on out local intranet or the end user's local ISP's are not blocking port 25, we are able to send emails without a problem.  If they are blocking port 25, then we can't send emails. I'm...

    Kingriggins20 pointsBadges:
  • DHCP versus Static IP

    The company I work for is planning on disabling the DHCP server and issue static IP addresses to all devices.  We have over 100 computers and wireless access points for laptops.  Has anyone ever heard of this approach to increase security?  

    EricHarter5 pointsBadges:
  • Need some performance tuning tips or suggestions.

    We currently have a 720-9406 model iSeries AS/400 system. We recently upgraded are OS to version V5R3M0. We are using the system mainly for our payroll processing which occurs weekly, as well as we have the system set up as a web server which we have employees accessing throughout the day. Since...

    Bkr0963c0 pointsBadges:
  • Juniper to PIX VPN (dynamic to static IP)

    We require assistance in configuring site2site vpn (Juniper-NS5GT-ADSL-WLAN in a branch office with ADSL connection (dynamic IP) and the pix 515e OS version 8.0 in the head office with a fixed IP)

    Rskendar5 pointsBadges:
  • configuration of a new router

    I WAS CONFIGURING A FRESH/NEW RUTER OF CISCO SERIES 1841 FROM A CONSOLE ON A HYPER TERMINAL.THE ROUTER WAS BROUGHT IN ROMMON MODE AND WRONGLY TYPED CNFREG-REGISTRY 1024 AND GIVEN THE COMMAND.AFTER THIS COMMAND ROUTER STOPS ACCEPTING KEY COMMAND AND HYPER TERMINAL BECAME BLANK .I SWITCH OFF THE...

    VADERA10 pointsBadges:
  • capture PLC-data in our LAN

    Our PLC-vendor is going to provide us collected PLC-data on a server in our LAN. Are sockets (port higher then 1024) the best way to do this? As we are AS/400-minded people, will FTP resolve this with the same performance? Or are there other possibilities? Please, please, give us some guidelines.

    Hahajokes5 pointsBadges:
  • Too high % temp. addr. in WRKSYSSTS – AS/400 aka iSeries

    In WRKSYSSTS the temp. addr. is too high and not getting lower after IPL. % perm addresses . . . . : 0,128 % temp addresses . . . . : 10,453 Can anybody tell me how to get this % lower? thnx Rita

    Ritakrop0 pointsBadges:
  • Can you transfer active jobs to another subsystem?

    If a job is already active in one subsystem, can you use tfrbchjob or tfrjob to move into a different job queue to run in a different subsystem, or will you get errors because the job is already active in one subsystem?

    Bkr0963c0 pointsBadges:
  • netstat -s for TCP Statistics for IPv4?

    Hello All, i trying to figure out TCP Statistics for IPv4 especially Failed Connection Attempts . I would like to understand what value would indicate high as threshold?. Also i would like to know if appearing of errors of such kind indicate issue at remote host or local, and what could cause such...

    Tbaror45 pointsBadges:
  • How To Print A Hardware Configuration List?

    Does anyone know of another command to use to print out a hardware configuration list for the AS/400. I have already used the following command: DSPHDWRSC TYPE(*AHW) OUTPUT(*PRINT) Is there anything else that can be used?

    Bkr0963c0 pointsBadges:
  • Activating NIC after P2V Causes Blue Screen

    After creating P2V using Live View, the virtual system appears to boot find.  After I activate a NIC in Host-only mode, the system blue screens.  How do I correct the problem?

    TMan145 pointsBadges:
  • The most-watched IT questions this week: Oct. 20, 2009

    Here are the 5 most watched questions on ITKE: There's some great discussions going on ranging from SQL to diagnosing app crashes. Go answer a question now and take your shot at winning a TV, or check out the rest of the top 10 on the Community Blog: 1.ORA-31672 in oracle 11g tops the list, with...

    Michael Morisy8,323 pointsBadges:
  • Upload IOS in cisco router without TFTP

    Dear Sir, Can you please tell me that how can i upload a ios in cisco 3640 series router without use of a TFTP server, Because TFTP server can be used only when we can ping a local ethernet, And if i have to upload ios directy for a pc then how can i?

    Khanna5 pointsBadges:
  • List all users in group..

    I am trying to pull the list of all users in a specified group. I have been able to query all of the groups like this: strUsername = Right(strUsername, Len(strUsername) - InStrRev(strUsername, "")) Set objDomain = GetObject("GC://rootDSE") objADsPath = objDomain.Get("defaultNamingContext") Set...

    Jagoodie60 pointsBadges:
  • Suppress FTP messages

    I've got a program that FTP's (put) files to another system. I always used the program in batch mode. Now I'm trying to ref the program interactively. But message 'Press ENTER to end terminal session.' requires user intervention. Does any know how I can suppress FTP messages while running in...

    Mtspudgun45 pointsBadges:
  • ldapd error on Ubuntu fileserver

    I adminster an Ubuntu fileserver, with ldap and samba to use for client control, but when I have to reboot I get an error that the ldap service ldapd can't start and I have to wait about 10 minutes for the server to properly boot and the ldapd is finally started. Is there a way to let the ldapd...

    Linux - Ask the Expert270 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following