• configuration of a new router

    I WAS CONFIGURING A FRESH/NEW RUTER OF CISCO SERIES 1841 FROM A CONSOLE ON A HYPER TERMINAL.THE ROUTER WAS BROUGHT IN ROMMON MODE AND WRONGLY TYPED CNFREG-REGISTRY 1024 AND GIVEN THE COMMAND.AFTER THIS COMMAND ROUTER STOPS ACCEPTING KEY COMMAND AND HYPER TERMINAL BECAME BLANK .I SWITCH OFF THE...

    VADERA10 pointsBadges:
  • capture PLC-data in our LAN

    Our PLC-vendor is going to provide us collected PLC-data on a server in our LAN. Are sockets (port higher then 1024) the best way to do this? As we are AS/400-minded people, will FTP resolve this with the same performance? Or are there other possibilities? Please, please, give us some guidelines.

    Hahajokes5 pointsBadges:
  • Too high % temp. addr. in WRKSYSSTS – AS/400 aka iSeries

    In WRKSYSSTS the temp. addr. is too high and not getting lower after IPL. % perm addresses . . . . : 0,128 % temp addresses . . . . : 10,453 Can anybody tell me how to get this % lower? thnx Rita

    Ritakrop0 pointsBadges:
  • Can you transfer active jobs to another subsystem?

    If a job is already active in one subsystem, can you use tfrbchjob or tfrjob to move into a different job queue to run in a different subsystem, or will you get errors because the job is already active in one subsystem?

    Bkr0963c0 pointsBadges:
  • netstat -s for TCP Statistics for IPv4?

    Hello All, i trying to figure out TCP Statistics for IPv4 especially Failed Connection Attempts . I would like to understand what value would indicate high as threshold?. Also i would like to know if appearing of errors of such kind indicate issue at remote host or local, and what could cause such...

    Tbaror45 pointsBadges:
  • How To Print A Hardware Configuration List?

    Does anyone know of another command to use to print out a hardware configuration list for the AS/400. I have already used the following command: DSPHDWRSC TYPE(*AHW) OUTPUT(*PRINT) Is there anything else that can be used?

    Bkr0963c0 pointsBadges:
  • Activating NIC after P2V Causes Blue Screen

    After creating P2V using Live View, the virtual system appears to boot find.  After I activate a NIC in Host-only mode, the system blue screens.  How do I correct the problem?

    TMan145 pointsBadges:
  • The most-watched IT questions this week: Oct. 20, 2009

    Here are the 5 most watched questions on ITKE: There's some great discussions going on ranging from SQL to diagnosing app crashes. Go answer a question now and take your shot at winning a TV, or check out the rest of the top 10 on the Community Blog: 1.ORA-31672 in oracle 11g tops the list, with...

    Michael Morisy8,323 pointsBadges:
  • Upload IOS in cisco router without TFTP

    Dear Sir, Can you please tell me that how can i upload a ios in cisco 3640 series router without use of a TFTP server, Because TFTP server can be used only when we can ping a local ethernet, And if i have to upload ios directy for a pc then how can i?

    Khanna5 pointsBadges:
  • List all users in group..

    I am trying to pull the list of all users in a specified group. I have been able to query all of the groups like this: strUsername = Right(strUsername, Len(strUsername) - InStrRev(strUsername, "")) Set objDomain = GetObject("GC://rootDSE") objADsPath = objDomain.Get("defaultNamingContext") Set...

    Jagoodie60 pointsBadges:
  • Suppress FTP messages

    I've got a program that FTP's (put) files to another system. I always used the program in batch mode. Now I'm trying to ref the program interactively. But message 'Press ENTER to end terminal session.' requires user intervention. Does any know how I can suppress FTP messages while running in...

    Mtspudgun45 pointsBadges:
  • ldapd error on Ubuntu fileserver

    I adminster an Ubuntu fileserver, with ldap and samba to use for client control, but when I have to reboot I get an error that the ldap service ldapd can't start and I have to wait about 10 minutes for the server to properly boot and the ldapd is finally started. Is there a way to let the ldapd...

    Linux - Ask the Expert270 pointsBadges:
  • When a Network receives a packet, does it use the IP or MAC address?

    When a packet is sent in the network, which address is being used; the IP (Internet Protocol) or MAC (Media Access Control)?

    NetworkingATE1,545 pointsBadges:
  • What is the difference between TCP and OSI?

    What is the difference between TCP (Transmission Control Protocol) and OSI (Open Systems Interconnection)?

    NetworkingATE1,545 pointsBadges:
  • Does anyone on your team have an AS400 script handy to purge out oldest members of appended files?

    Basically, I'm hoping that somebody out there might already have a script or program that they use to purge out old members that get appended to static physical files on the MC400 (HNNE). I would be much obliged if you could send me the program or provide me a tip on where I can find a good script...

    GottaggedsoamnowIT0 pointsBadges:
  • how to update to usb high speed controller for usb wireless device

    I HAVE A...  INTEL(R)CELERON(TM)CPU 1200MHz 1.20GHz. I'm running Windows XP Professional Version 2002 service pack 3 .  I have a wireless device hooked up thru my usb port . Intel 82801BA/BAM USB Universal Host Controller - 2442 an a 2444 witch are standard  USB Controllers . I want to Know how...

    Raywasson5 pointsBadges:
  • when i’m trying to login domain instead of login i’m getting logged off

    when i'm trying to login domain instead of login i'm getting logged off, can i get any solution for this as i have tried formatting the disk n reinstalled the new OS Winxp but again same problem occuring

    Samad197835 pointsBadges:
  • DOS Attact Message or Just a Simple Query”?

    I have checked firewall alert message everyday from my organization firewall equipment, and it returns an alert message "anomaly: udp_src_session, 1001 > threshold 1000, repeated 214 times" Starting from 172.10.2.45:51158 to 210.181.1.24:53. I wanna know whether it's really infected and...

    RedJason5 pointsBadges:
  • FTP Timeouts

    I am using IE8 on Windows2003 server to connect to a intranet server running warFTP to do file transfers. It starts the transfer and copies a few files and timesout. Why

    Rondog5 pointsBadges:
  • Configuring IPv6 on 3825

    How do I configure IPv6 on a Cisco 3825 router, to route between two networks

    Txstrat5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following