• LPR Printer IP settings lost

    i have a number of printers that do not work through standard TCPip port on my Windows 2003 server, but some dont, if i connect them through LPR port they work but problem i am having is that each time my server is restarted or the network goes down i loose the LPR IP settings and i have to redo...

    Danies5 pointsBadges:
  • IP lists to allow users to access a website internally only

    We want to launch an internal website that only can be accessed from our network clients. This includes remote users. Is there an "allow these IPs" list somewhere using is on a Windows 2003 standard? Or will I need to create firewall rules for this?

    ITKE352,565 pointsBadges:
  • Results of two wireless clients logging into the same network with the same static IP

    If two wireless clients log on to the same network and both have the same static ip configured for the wireless adapter and they log on at the same time what will happen? Will either be able to use it? Or both intermittently? Is there a way to protect from this? We use static ips around here for...

    ITKE352,565 pointsBadges:
  • Setting Up Another AS400 Console

    Anyone has a documentation for setting up another AS400 console. We have a QCONSOLE setup on a machine but the machine broke down and i am trying to setup another on a different PC. Console is connected via LAN. I have set it up but could not get to the part where i have to enter Decvice ID...

    Arcsax095 pointsBadges:
  • Network Paranioa

    I have WEP enabled on my wireless router. However, I have a small 4 port firewall that I want to use in addition to wireless router firewall and my software based firewall. Is this doable?

    Roblhicks5 pointsBadges:
  • How can I load balance my router managed by two ISPs?

    I have two ISP (Internet Service Providers). How can I balance the load between them (or load balance them) using the router and take their output and send it through one Ethernet port, out to my network? It must be set up  this way because I have only one firewall (which has only one Ethernet...

    NetworkingATE1,545 pointsBadges:
  • Where to connect NAS devices in business networks for storage access?

    In my small business network I have an ISP modem, then a Sonicwall NSA 240 firewall, and then a Linksys WAP 2000 access point (AP). Can I install a network access storage (NAS) device, like a D-Link DNS-343, to the network for all employees to share, store and back up files? And if so, where in the...

    NetworkingATE1,545 pointsBadges:
  • Setting up PIX535 but no network connection at all

    I am setting up spare firewall on an old PIX 535. I reset the box to factory default, assign the inside interfact an IP address and use a cross-over cable to for a laptop to connet to PIX.  The problem is I am not able to ping the firewall from the laptop vise versa.  There is no any ACL on the...

    springman95 pointsBadges:
  • Should I register a DNS name for the NAT IP address?

    I have setup our firewall to NAT the inside IPs to an external IP address. Is there a reason I should or should not register this NAT IP address to a DNS name?

    springman95 pointsBadges:
  • Advanced firewall design

    suggest me some techniques regarding to the firewall design

    Asu30 pointsBadges:
  • Juniper SSG550 Firewall – Routing Policy

    It's required to create a new (virtual) interface (with a global IP) that will receive hits and route them to a specific IP behind the INside interface. So basically a policy or route that will do: 1- User opens browser for www.test.com 2- DNS registered to point to our global IP on the new VIP on...

    TaherAfridi5 pointsBadges:
  • Wireless Network Bypassing

    hi i have one wireless Linksys usb network adaptor , i connect it to my Laptop after getting signal internet start normally .know question is that i want to use my laptop as a wireless repeater .( like attach one router to laptop and getting signal in my place) actually in my room there is very...

    Danial370 pointsBadges:
  • Windows hour glass and black screen during an RTP session

    I get the windows hour glass and black screen during an RTP connection session, after some time of keyboard or mouse inactivity. I move the mouse and the display comes back immediately. On the rmote and host computers I have screen savers off, displays always on, and no hibernate. Any ideas on how...

    Johnnyt335 pointsBadges:
  • Prerequisites for Spiceworks

    What are the prerequisites for installing Spiceworks on our network? What type of account do I need to give it for scanning? Is it safe? How can I audit what the application is really doing for review?

    ITKE352,565 pointsBadges:
  • How to configure a single ethernet port

    how to configur singal ethernet port i want that steps with key

    Afraz5 pointsBadges:
  • 2010 Office sync with PDA

    I'm upgrading Office 2003 to Office 2010. Before I install 2010 Office Professional Pro for XP service pack 3, I need to know will it be a compatible sync with PDA Ipaq x2400 series with Windows 5.0

    LibertyMD5 pointsBadges:
  • Best practices involving admin rights for user on user system

    We are currently in the middle of figuring out the approach we are going to take in regard to a user having admin rights on their system. Typcially we set up a new user as an administrator on their system when they are logged into the domain. They don't have a local admin account on the system,...

    Kevins740 pointsBadges:
  • Windows Server connectivity to local user

    I HAVE TIRED MANY TO CONNECT A USER TO DOMAIN BUT UNABLE TO CONNECT. I HAVE INSTALL ADS,DHCP,DNS SERVER... BUT THEN TO UNABLE TO CONNECT. PLS TELL WHAT ALL I NEED TO CHAECK ...THE ERROR THAT OCCURS IS THAT THERE IS SOME PROM INDNS SERVER CONFIG. PLS TELL ME STEP BY STEP PROCEDURE TO CONNECT THE...

    49932210 pointsBadges:
  • Benefits of VLANs?

    What are virtual lans or vlans? What are they used for and will they allow me to increase my networks overall speed and throughput ratio?

    ITKE352,565 pointsBadges:
  • How can I configure a connection by pppoe on a Cisco 2600 Router?

    please can somebody help me to find out the way i can configure a connection by pppoe on a Cisco 2600 Router?

    T8sta5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following