• Unable to import registry key silently.

    Hi, Trying to install a registry key using a .bat: regedit.exe /s \\Serverpath*.reg but it still prompts the user every log on to install the key. The key is dictate what texture the screensaver 3d Flying Objects will use. Any thoughts what I could be missing? Thanks for taking the time to read...

    Redhog5 pointsBadges:
  • One wire protocol

    Hello Can we connect 2 or more computer or devices ( like microproccessor or microcontroller ) together and transfering data in the same time with only 2 wire ( 1 for ground and another for data transfering )? IS this way good or not? Thanks.

    IC0d3R5 pointsBadges:
  • Setting power save mode on Windows 7 machines

    How can we set power save mode properly on new Windows 7 machines and wake on LAN to save on electricity costs?

    TeachMeIT975 pointsBadges:
  • Booting generic machines to the network & installing image of Windows 7

    We purchased 200 generic machines without operating systems. We need them to boot to the network and install an image of Windows 7. What is the best way to do this? Can it be done with Windows services?

    TeachMeIT975 pointsBadges:
  • Remote copy from DOS to Linux

    Is it possible to copy folder from Linux to Dos env via dos command. I want to copy folders from Linux os over network when I fire the command from DOS env. Please any one give step by step guide. Don't tell me to copy from Linux cause it is not possible. I have only Dos Env and connected thru lan...

    Subhendu Sen30,250 pointsBadges:
  • Station with a mac address 00:11:22:33:44:55 shown on wireless clients

    station with a mac address 00:11:22:33:44:55 shown on wireless clients: Multiple Clients have same Mac address 00:11:22:33:44:55 I guessed it might be an issue from some of the NIC manufacturers.I am wondering what is the impact to the users on the wireless network will be? If two users have the...

    Truth5 pointsBadges:
  • Access Control List for users allowed to access network

    Is it possible to setup an access list for allowed computers on the network and prevent others from using any network resources like internet and printers. Even with a valid username and password I want them blocked if they are not on the Access Control List.

    Troubleshooter24755 pointsBadges:
  • How to configure ASA 5510 with dynamic IP address

    I want to configure the Cisco ASA 5510 with my ADSL connection. Adsl conection getting the dynamic IP address from ISP so how can i configure the ASA so i can use site to site connection and vpn client. On site also having ASA 5505 and pix 506 with ADSL connection. Office user also wants to connect...

    Cicso5 pointsBadges:
  • Solution other than MPLS with Leased Line Link

    We have MPLS managed services provided by the ISP. CE router connects to our router with L3 link and we are running OSPF on L3 links connected to CE routers. Earlier we had leased lines and we could use multiple leased lines with load balancing and high availability, terminated on the same router....

    Eesh125 pointsBadges:
  • Toshiba Laptop (wireless – netgear router) Windows Vista to print to Gateway desk top Windows XP with HP Laser Jet 2100 PCL6

    I have a wireless (netgear) network for my Toshiba Windows Vista laptop and I am trying to print to a Gateway desktop Window XP with a HP Laser Jet 2100 PCL6.  I have turned on the sharing for the desk top and tried to add the driver to the lap top but it said it was incompatible so I browsed the...

    Sweetie15 pointsBadges:
  • Forcing HTTP/HTTPS Traffic Thru a Specific Connection

    Hello I have several sites connected via a MPLS network for MS Exchange and other shared resources. Currently we have an Internet connection going into one site and making HTTP/HTTPS traffic accessable to the other sites over the MPLS network. We would like to use a secondary Internet connection...

    Gongos5 pointsBadges:
  • Locked out of Cisco Router – Password reset doesn’t work

    do work for a local non-profit group. Apparently some prior network admin left under unhappy circumstances and did something to the cisco router(s) there. We had no password access, so I went through the password recovery/reset procedure. Everything seemed to be fine except for two little details:...

    Bobkberg1,070 pointsBadges:
  • How to determine password expiration

    Recently this iSeries user wrote in with a question about password expiration. He writes, "How can I tell if a user's password does not expire? I've used the user profile report, but all it gives me for expiration values are 0's or -1's for all of the users." Can you help? Michelle Davidson Editor...

    MichelleDavidson435 pointsBadges:
  • IT Book Giveaway: Oracle Solaris Cluster Essentials

    We've got your ultimate in-depth resource on the start-to-finish lifecycle guidance for planning, implementation, management and troubleshooting your Oracle Solaris Cluster. There's even helpful advice for both Oracle and non-Oracle database environments. Win this valuable resource by answering one...

    MelanieYarbrough6,345 pointsBadges:
  • Slow Login process from client in Windows Server 2008

    Slow Login process from xp client to windows2008 Domain,How to speed up?

    Saa5 pointsBadges:
  • How to recover deleted files of file server from client?

    How to recover deleted files of file server from client, and server is not running with shadow copy??

    Cdsathya5 pointsBadges:
  • Access Point configuration with Cisco 1240

    how to configure two access point 1240 cisco with each other ?

    Rafatema10 pointsBadges:
  • Flow Control & Error Detection in OSI model

    In the OSI model, why does the Error Detection & Flow Control happen 2 times? As i know, these two happen in the DataLink layer and after that in the Transport layer. Whats the reason of checking them two times? Thanks

    Ariabarzan10 pointsBadges:
  • Which exams should I take for the CCNA and Mcitp path?

    Hello, im new here, and i take this occasion to say what a helpfull website is this.... Basically im very confused!!!! I just got ccna certified today and i was very happy until i got home wondering to see what is my next challenge in my IT career education  so i visited the microsoft web site and...

    Rock835 pointsBadges:
  • Linux / Windows server workgroup networking

    My network is runing on workgroup network, i want to install mail server on its, what is the better options for me choose, Linux server or window server. I have 150 users on my network. Can you give me a good suggestion please?

    0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following