• Cisco Router 1841, will not Recongnise ip http secure-server command

    I want to install SDM on my Cisco 1841 router, but the router will not Recongnise ip http secure-server command,but i still manage to install the SDM on the router now i cannot configure the VPN because is not available i think due to wrong ios release on the router.please how can i update it or...

    Olu15 pointsBadges:
  • Route map Cisco

    I have a cisco router 1841. It has 2 outside adsl interfaces, and an inside interface connected to local lan. I want to use the 1st adsl interface for http, ftp and the 2nd adsl interface for the rest of the internet traffic. Below is a sample of my configuration: interface FastEthernet0/0  ip...

    Meglo161020 pointsBadges:
  • Why does my Cisco ASA hang when I enable no NAT statements?

    I am using Cisco ASA-55x0 Version 7.2(2) to secure my business network. When I enable the  no NAT statement, the ASA gets hanged. How do I fix this, and why does this happen?

    NetworkingATE1,545 pointsBadges:
  • cisco 4507 gigabit int down line protocol down

    hi can any one help with this i am setting up 4507 with fiber connections but int never comes up it says gigabit int down line protocol down

    Ank19825 pointsBadges:
  • Factors to consider for mass broadcasting on a switch

    Hi all, I am a newbie in network domain and will need your expertise :p Scenario: 2 grps of servers (grp A - 3 units, grp B - 10 units) are connected in the same segment on a Cisco 2960g, WS-C2960G-24TC-L. Each server only has one 100Mbps network interface connected in this segment. The task of...

    LinkThemAll15 pointsBadges:
  • Part number for Cisco ASA5510 256MB memory module

    Hello All, Can anybody tell me the part number of 256MB memory module for Cisco ASA5510 Firewall?

    Choonapk15 pointsBadges:
  • When do I use RIP, EIGRP, IGRP AND OSPF?

    When do I use RIP, EIGRP, IGRP AND OSPF?

    NetworkingATE1,545 pointsBadges:
  • How do I configure network ports to full-duplex on McData switches?

    I want to know how to configure a network port on my McDATA Intrepid 6140 switch to full-duplex. Until now it's been on half-duplex.

    NetworkingATE1,545 pointsBadges:
  • Two exchange servers on one WAN. Emails are being kicked back

    New location with its own exchange server was added to WAN now when sending emails to this new location emails are being kicked back. The exchange servers are on diffrent LANs but on the same MPLS Network Cloud. Both can ping eachother through the MPLS cloud. Thanks

    Rortiz12065 pointsBadges:
  • forwarder question – DNS

    Hello   As part of a systems migration to RA Airways I am required to to remove RA subdomains from our DNS (that we were formerly authoritative for) and forward them to our Untrusted DNS which then on -forwards to the RA net DNS servers for the correct (un NAT'd) resolution.   I am doing a trial...

    Richsark5 pointsBadges:
  • Enable SSH

    Hi All, I have bought a new c3950 switch, what should i do to enable ssh service for the first time.Should we install cryptographic image if so how to install it.

    Vptechie70 pointsBadges:
  • How should be through to get a cisco certified network job?

    I am a desktop/pc technical support engineer with 7 years of work experience on windows os and basic network operations, now i want to be a network professional as it is my dream from my graduation. i am now certified with CCNA, i need help from you to get a job in this profession. how should be...

    Myfirstjob10 pointsBadges:
  • Remote Acess VPN problem on ASA 5540

    Dear I have configure remote access VPN on asa. i have assign ip pool for remote user same as inside subet ip scheme.from remote i can able to make VPN tunnel with asa outside interface.at remote i can get ip address from inside ip pool but i cant able to ping inside network resources.then try...

    Jatin7075 pointsBadges:
  • dynamic routing and static routing

    when is dynamic routing used?  And when is static routing used?

    Billdollar5 pointsBadges:
  • Windows Network Authentication Popup

    Hi, Can anyone please tell me when we enter a network path of any machine like (192.168.1.1) a popup appears. if you can tell me what services start this popup and which ports on network it uses.

    Mazhar995 pointsBadges:
  • How to install the passthru server?

    Dear domino experts, I've some problems. Currently we are trying to setting up one more server to be used only as a passthru server. In order to install a domino server to it, may I know do I have to select "Set up the first server or a stand alone server" or "Setup an additional server" ? I've...

    Anevil140 pointsBadges:
  • Cisco Network

    I am using Cisco Packet Tracer 5.2 for study, it seem to be good. I have configure Intervaln routing on 3 coreswitches which is workign fine with vast topology. I tried to place one router 2811 as a firewall between my wan and lan. But i am not able to ping from router to core switch Please suggest...

    Ekansh400 pointsBadges:
  • TCP/IP Timeout

    I am using Client Access 5250 emulation connecting to a model 270 at V5R2. The host has a public IP address so there is no VPN, etc. After 5 minutes of no keyboad activity my job is disconnected. Does anyone have any ideas on what I can do to keep my job active? Thank you.

    LBurkett99830 pointsBadges:
  • how to map a network drive on server 2003 to vista machine shared folder

    How do I map a network drive on a windows server 2003 machine to a vista machine with a shared folder. I get an error that says network path not found and that the server 2003 does not have rights. I am logged in as the administrator. I can ping the vista machine.

    MiloGeek5 pointsBadges:
  • NT 4 to 2003 local server migration

    I am attempting to migrate a VERY OLD FTP server running on NT 4 (IIS4) to new hardware running 2003 R2. I am currently using local accounts on both servers as these are not connected to our AD environment. I am able to migrate the IIS FTP sites but am needing to migrate the corresponding NT...

    MicJ155 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following