Cisco 2811 configuration for managing traffic through two Internet connections
How can I use a Cisco 2811 configuration for managing traffic through two Internet connections?

Answer Question   |  June 10, 2013  9:08 PM
Cisco 2811, Cisco 2811 configuration, Network traffic management

Static Routing and Dynamic Routing
I have some very important questions regarding dynamic and static routing. I donot understand that how static routing is more secure than dynamic routing? My other question is that in static routing ,what we do is simply enter the information regarding the neighbouring Router in the routing table of our Router ,but if the remote [...]

Answer Question   |  March 4, 2009  7:25 PM
Dynamic or Static IP, Dynamic Routing, Routing, Static route, Static Routing

Bandwidth and Connection Speed
I have a question regarding bandwidth and connection speed. I know that bandwidth is provided by the ISP Service but I wanted to know that the does the wireless or wired NIC card in our computer uses the bandwidth provided by ISP to connect to the basestation(Router) or the connection speed between the NIC Cards [...]

Answer Question   |  July 22, 2009  7:07 PM
Bandwidth, ISP, Network speed, NIC, Routers

Wake on LAN: No light displays when the computer is in power off state
In BIOS on the Power Management Setup: I have enabled Resume on PME Enabled. Again, in NIC cards’ property in the power management section: I have enabled allow this device to wake the computer and only allow management station to wake the computer. But I even don’t know why there in blinking light in nic [...]

Answer Question   |  March 3, 2009  2:50 AM
BIOS, Enterprise Desktop, NIC, Power management, Wake on LAN

Multiple public IP’s from 1 internet connection on different networks?
Is this a possible scenario? A cable modem is hooked up via ethernet to a Linksys 5-port switch. That switch is then hooked to a Cisco SOHO router (not managed by me) and my Linksys router. I cannot get my public IP to work on my router but the Cisco routers public ip comes up [...]

Answer Question   |  March 9, 2009  9:14 PM
Cisco Routers, Internet access, IP address, Linksys, Network design, Router Troubleshooting, Switches

Networking Problem
I have Windows XP professional OS. I have networking problem in my laptop. I am able to ping successfully on google.com (0 packet loss), however I am unable to open any web page. I spoke with my cable provider Customer Support & he said everything is fine but it looks like some of the security [...]

Answer Question   |  March 9, 2009  8:32 PM
Network Connection Problem, Windows XP, Windows XP Professional

Blocking LogMeIn and remote access programs
Hi, I have a Watchguard X1250e and I would like to block “LogMeIn” from accessing the internal network from the WAN side. Looked on the Watchguard FAQ. Cannot seem to find a place where to enable this setting. Any help would be appreciated.

Answer Question   |  October 28, 2011  3:32 PM
Firewalls, LogMeIn, Remote access, WatchGuard

Which wireless routers will work with PlusNet?
which wireless routers will work with plusnets provided modem the d link dsl 320b?

Answer Question   |  March 2, 2009  9:25 AM
D-Link, PlusNet, Router configuration, Routers, Wireless router configuration, Wireless routers

Sharing Internet between two PCs
Need a help in sharing the internet between two PC. I have the first PC that connects to teh internet through USB WLAN adapter. The second connects to the first PC through crossover cable (wired ethernet). Please suggest me, how to share the internet with with setup. Thanks in advance.

Answer Question   |  March 9, 2009  6:22 AM
Internet access, Internet connectivity, Internet Sharing, Shared Internet Connection

CWDM PON
I have to design a passive optical network that uses WDM technology ( CWDM in particular ) for triple play broadband services including HDTV to residential and buisness customers. There is also a hospital which provides long distance medical imaging and 2 colleges that has distance learning (live video broadcasts and video conferencing with other [...]

Answer Question   |  March 2, 2009  8:18 PM
Coarse Wavelength Division Multiplexing, CWDM, CWDM PON, Network design, Network Topology, Optical Networking, Passive Optical Network, PON

Problem viewing Shared Folder on server
THIS IS NOT AS SIMPLE AS IT SEEMS. I appreciate your time and effort, I have a weird one here…hopefully someone can help. I have a VPN server setup. working perfectly. I connect to it from computer A- using xp pro sp2. everything works. B – using VISTA ultimate – everything works. C – using [...]

Answer Question   |  March 10, 2009  6:24 PM
Network Shared Folder, Shared folders, VPN connectivity, Windows Vista, Windows XP

Admin Password
I am new to becoming the head of IT and i’m replacing an admin who supported 50 users for a law firm now that i’ve been accepted for the position i am walking in the dark without any knowledge of what operating system is on the server, or how to change the admin password or [...]

Answer Question   |  March 9, 2009  8:12 AM
Administrative privileges, Administrator password, it management, Network administration

How to rate limit on Cisco Catalyst 3550-EMI
Hello, I have a cisco switch 3550 EMI and I need to do rate limiting on ethernet ports. class-map match-all 5M description 5M with 500K burst ! policy-map 5M class 5M police 5120000 51200 exceed-action drop interface FastEthernet0/3 switchport access vlan 100 switchport mode dynamic desirable speed 100 duplex full service-policy input 5M service-policy output [...]

Answer Question   |  March 2, 2009  12:48 AM
Bandwidth limits, Bandwidth management, Cisco, Cisco 3550, Cisco Catalyst 3550, Cisco Catalyst 3550-EMI, Cisco switch configuration, Switch configuration, Switches

Infrared Wireless Link Applet default dettings
If I have an XP computer with an Infrared port and open the Wireless Link applet for the very first time, what are the security default settings on the Infrared and Image Transfer tabs?

Answer Question   |  March 2, 2009  10:22 PM
Infrared communications, Infrared Transfer, Windows XP, Wireless Link Applet, Wireless security

SSL certificate for 2nd Exchange OWA
Hi all, Our external users access their email via https://owa.domain.com/exchange I am adding a second owa server to our domain for redundancy. The nlb cluster established on the 2 owa servers works fine. In front of the OWA servers is an ISA server that connects to the internet. The ISA connects to OWA using SSL [...]

Answer Question   |  March 4, 2009  11:06 AM
Exchange administration, Exchange security, ISA Server, Network Load Balancing cluster, NLB cluster, Outlook Web Access, OWA, SSL bridging, SSL certificate

Cisco 2811 configuration for managing HTTP and other traffic through two connections
Hi all, I have one Cisco 2811 router with serial interface for leased line connection to internet and an adsl wic for Internet connection too. What I what is to do is let HTTP traffic goes through the adsl connexion and other traffic go through the leased line. Is it possible and how? Thanks

Answer Question   |  June 10, 2013  7:51 AM
ADSL, Cisco, Cisco 2811, Cisco 2811 configuration, Cisco ADSL WIC, Cisco router configuration, Leased line management, Router configuration, Routers

Actiontec ADSL and Internet providers
Is the Actiontec GT724WGR modem/router compatabile with WOW internet service?

Answer Question   |  January 10, 2011  11:30 PM
ActionTec GT724WGR, ADSL modems, ISP, Modem/Internet compatability, WOW Internet

Hide Calling Number – Cisco Call Manager 5.x
Hello, I’m trtying to hide the DN of the Calling party when calling another internal number This will be used to stop the Service Desk agent being called back directly by users This is what I have done created new PT Created new CSS Added PT to new CSS changed phone device to have new [...]

Answer Question   |  February 27, 2009  5:53 PM
Cisco Call Manager, Cisco CallManager, Cisco CallManager 5.x

Wireless Network With User Name And Password Login
Hello I am looking to setup a wireless network. I want it to not have to use an authentication code but instead divert everyone who connects to it straight to a login page. I would setup a list of all user names and their passwords that I would want to be able to connect to [...]

Answer Question   |  February 27, 2009  3:40 PM
Linksys, Linksys Routers, Wireless networking, Wireless networks

SQL Server 2005 database mirroring over a VPN router
Can SQL Server 2005 database mirroring work if the mirror server is to be in another building with the networks connected via VPN router?

Answer Question   |  February 27, 2009  3:34 PM
Database mirroring, SQL Server 2005, SQL Server database, SQL Server Database Mirroring, VPN routers