Open IT Forum: Goals to round out 2011 – The goals that have been set for our department to finish out this year (2011) and move into 2012 are simple; establish a base line of where we are currently with our software (back office) and begin the planning to fully implement the new back office [...]
Check disk drive use, also disk cache battery
O.K…….I get the following when I try to telnet from home…… Could not open connection to the host, on port 23; connect failed Do I need to port forward other port(s) in addition to port 23 ?
Hi, You just need to tell your customer to add your domain as a trusted domain in her mail server and you too add her domain as a trusted domain in your mail server.Hope this solves your problem.
The best method for this is have the router perform the VPN connection. First off you need to coordinate with the VPN manager if this is an allowed activity and determine if they already have a solution. Note that corporate VPNs often have detection software/devices scanning VPN connections to prevent just what you are attempting. [...]
I just answered the Cisco ASA question <a href=”http://itknowledgeexchange.techtarget.com/itanswers/asa/#viewquestion”>here</a>. Check it out! I LOVE CISCO!
Hello, I’m including the command line procedure here with the assumption that you are familiar with accessing and utilizing the command line in a Cisco device. 1. We have to first create and RSA key pair (this is an SSH prerequisite) by using the command: <pre>hostname (config) # crypto key generate rsa modulus modulus_size </pre> [...]
Hi, I’ve posted an answer which you can check in the following url: http://itknowledgeexchange.techtarget.com/itanswers/power-shell-script-change-screen-resolutions/ Regards
My documentation is written to be understood by the least knowledgable person who will be using it. If I’m writing disaster recovery procedures, they are written to be understood by the least qualified and knowledgable person in our department. This is no means a reflection on their abilities, but simply an opinion that if they [...]
Hello Rajasekhar15, Assuming everything is correctly configured, network, ip addresses, etc. you might only need to configure port forwarding on your router. You need to forward all connections made to you public IP address (router outside interface) and port (RDP uses 3389) to the internal IP address of your server and port. This way you’ll [...]
A timely response is always encouraged and just good customer service of course. Nothing worse than asking for help and then waiting hours or even days for a response. If you say someone will be with the customer shortly, don’t keep them waiting forever please! I don’t mind giving a level of severity. If I [...]
Yes you can run multiple servers on the same LAN, that is completely normal. Just don’t run two DHCP servers and you’ll be fine. It sounds like this is just an application server where the users connect either via a web browser to a website on the server or via a fat client to a [...]
The main problem in our area are ice storms, freezing rain, severe thunderstorms and tornados. Most of these result in power outages which is dealt with by UPS and backup generators. Now our company has experienced growth over the past decade to the point where we are now beginning to implement 2 co-locations for our [...]
Thanks but i have noticed that this only applies to IPv6 and not to IPv4, is that right ? Best Regards If it is windows 2008 go to the Microsoft library: http://technet.microsoft.com/en-us/library/dd759178.aspx After you enable it, you will find event logs for the following: ID: A DHCP server event ID code. Date: The logged on [...]
Hi, You can employ URL shortening, just click on the link: For further queries, you can ask on the same thread. Thank you Anil I would add a canonical tag instead. That way something like http://www.homepage.com and http://www.homepage.com?source=techtarget aren’t viewed as different pages.
What is the full text of the error message? Add the complete error message Thank you Anil Lepide softwares www.lepide.com
Go to the link below: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network I hope this would help. Thank you Anil Lepide Softwares
It is possible. Do not configure any Layer 3 properties by using “no ip routing” in global config. Also, you can do “switch-port mode access” for a particular port to act as Layer 2.
well it can be done in two ways but not to recover just u can change or remove the password. 1) on the system in safe mode and u can remove the password 2) another is just type in cmd prompt as follows net users net users “account name” * it will ask type new [...]
A series of stories.





