• What is the multicast IP address reserved for RIP2?

    What is the multicast IP address reserved for RIP2?

    Yasir Irfan5,550 pointsBadges:
  • Added computers not recognizing Linksys router, network down

    i need to reset my network but none of my added computers are recognizing the router wrt54g do i need to change the name of my network. the network went down while i was awy for a couple of days and never has come back up.

    061015 pointsBadges:
  • How to make this DMZ routing work?

    Currently we have the DMZ ACL in the ASA firewall. One interface that was assigned as DMZ was connected to the core switch and within a VLAN. The server that was untagged to this DMZ VLAN will have the DMZ ACL applied to the inbound/outbound traffic.  This was quite simple setup.  This issue now...

    springman95 pointsBadges:
  • How to define local bandwidth and international bandwidth on Cisco 3845 with 2960 switch

    I have a 1gb local bandwidth with 10mb international bandwidth in my data center. and my problem is i don't know how to share the international bandwidth equally to my clients. I don't know if there are device i need to use or is there are anyways i could just control the international bandwidth....

    Bosslui5 pointsBadges:
  • Getting Ping Timeouts from Cisco 2948G-L3.

    Hello, I have Cisco 2948G-L3, the problem i am facing is that i am not getting ping response from the router. The senerio is that i have configured 192.168.1.1/24 in fa 1 and 192.168.1.5/24 in directly connected PC. Router is also sensing the port status, when i plug the cable in it, it shows port...

    Hab345 pointsBadges:
  • OCS and AutoLogon BSOD Issues

    Hi all, Recently, one of my clients has been experiencing issues with a BSOD (I'll enter the stop error details below). The first referenced communicator.exe, and the second referenced Autologon.exe as being the culprits. Has anyone had any experience with these two programs causing driver faults?...

    Lordhowe175 pointsBadges:
  • Do most providers charge an extra fee to run dual-stack?

    I'm talking to my current ISP about IPv6 migration, and I'd like to know whether service providers typically charge you to run dual-stack or not. Should I expect Internet service providers to charge extra for any other IPv6 migration costs?

    SearchEnterpriseWAN1,095 pointsBadges:
  • What is carrier grade NAT?

    What is carrier grade NAT and what is it used for?

    SearchEnterpriseWAN1,095 pointsBadges:
  • Application Access Control Management

    Is there an enterprise wide software management program that can manage access to our web-based applications, vendor specific programs located thru out the entire company, and our MS applications, including MS Outlook? In other words, we would like to control all of the various software programs...

    NBf9910 pointsBadges:
  • CCNA Certificate

    I want a CCNA certificate to view.Can anyone show me that?

    Gettubai5 pointsBadges:
  • ccna questions

    just signed up to start N+ certification, actually begin tonight, and then CCNA, both are to be finished by August 2008, taking Cisco b/c i have an "in" at a company, have no previous, formal networking experience, am i going to be able to pass the CCNA? starting to worry. i do really enjoy...

    Jjb2715 pointsBadges:
  • Open IT Forum: Security Worst-Cases

    Have you had rogue employees deploying to the cloud without your knowledge, that is, until something went wrong? Share your worst-case experiences including how you rectified the situation. We want to hear your security horror stories to help other members and potential rogue employees avoid the...

    MelanieYarbrough6,345 pointsBadges:
  • job prospects

    i am currently enrolling to begin N+ and the on to the CCNA, i was working on an Assoc. in networking, first quarter done, but left to puruse certifications b/c they will teach me what i want to learn at a much cheaper price and shorter time frame, on the job front, i have been in research for 9...

    Jjb2715 pointsBadges:
  • Do I have to start at helpdesk to get networking experience? Won’t that waste my CCNA certification?

    I currently hold my A+, Net+ and CCNA certifications and have experience in IT but not so much experience in the networking field with my CCNA. I am working with multiple staffing agencies looking to utilize my CCNA cert but am not having any luck. I hear all the time that I lack the experience...

    NetworkingATE1,545 pointsBadges:
  • My networking job isn’t going anywhere

    I am now working as desktop tech support in a school (that uses Netware and XP). With my present knowledge and experience (one year) I am not able to apply for a network engineering role or anything like that. With my current job I am not learning very much, as well as everything is setup. My team...

    NetworkingATE1,545 pointsBadges:
  • CCNA need to know Dos Command line/Registry/shell script???

    For any of Cisco certification job , do we need to know how to do DOS commmand line, fixing registry and writing shell script??? What I actually want to know is does cisco people only dealing with Physical side of newtork such as switch, routing & network configuration. do they need to know much of...

    ITfuture40 pointsBadges:
  • A+ cert require for MCSE / CCNA??????

    I would like to know if A+ certification is a neccessary before study either of CCNA or MCSE??? does CCNA/MCSE job need to know how to fix failure computer/server?? Do CCNA people only need to know how to fix/configure Network or should they know how to install RAM, write shell script/register, and...

    ITfuture40 pointsBadges:
  • What qualifications do I need to be recognised as knowledgable on networking

    Hi, I would like to study for some networking qualifications, but I'm not too sure which ones would be most useful for me in the job- market. I'm A++ qualified and have done a few networking jobs including a wireless network at my current work place. I enjoy networking but realise that without...

    Cmk5 pointsBadges:
  • Preparations for Cisco exams

    I am preparing CCNA exam. I have studied from 2 cisco press books. I have found out that I had beed studying for long duration to master the whole concepts of the book. I have found no time to spend with my frineds just to play sport or read newspapers or spend some time with my family. My question...

    1364784570 pointsBadges:
  • How do I show recruiters I’m valuable as a network analyst/engineer/manager when I have seven years of Telco experience?

    I have a CCNA and three of the four certs of CCNP. I should be getting CCNP this month. My question is I have seven years in a LOC test center in AT&T, and my only experience is Telco (WAN). How do I show recruiters I'm valuable as a network analyst/engineer/manager when most ask for 3-4 years of...

    NetworkingATE1,545 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following