• Error connecting to the server after changing the ip address of the server

    Hi. We have to change the ip address of all the mail servers in our environment. I tried to do this on testing server and found out that the server whose ip i had changed is working fine but the other server which was in cluster with this server is unable to connect to this server. I have changed...

    Mohit04130 pointsBadges:
  • Can’t Connect using 24 port Baylan Switch while working okay with an old baylan 08 port switch

    Can't Connect using 24 port Baylan Switch while working okay with an old baylan 08 port switch that has an Uplink additional port. When i connect using 24 port switch, it starrts dropping packets and ping response breaks continously. Can any one help on this. Please! My network structure is =>...

    Kimbukhari5 pointsBadges:
  • What is IPv4 forwarding?

    What is IPv4 forwarding? How is it used?

    SearchEnterpriseWAN1,105 pointsBadges:
  • How will IPv6 header extensions improve routing?

    How will IPv6 header extensions improve routing?

    SearchEnterpriseWAN1,105 pointsBadges:
  • Cisco 3560 IP ARP command

    how do i use show ip arp command? I can use this command on my core switches, but i want to use this on my access layers switches i.e. cisco 3560 but it is not giving any results. please suggest  

    Ekansh400 pointsBadges:
  • What happens after CCNA?

    Hi, I am planning to take CCNA certification and I am interested in securty side. So, After CCNA, what id the Cisco course I need to prefer. I have heard CCNP has a diversed group with Security as one of the domains. So if its CCNP Security, what would be after it? Is there anything like CCIE...

    Kochuvila20 pointsBadges:
  • NPS RADIUS auth problem

    We have an NPS RADIUS auth. problem. Currently we are running a site with 1 RODC and 1 RWDC in paralell as we are transfering all the services to the new RWDC and preparing to demote the RODC. What is left to transfer before i demote RODC is NPS. We were testing RADIUS yesterday evening by powering...

    I486dx26670 pointsBadges:
  • Setting bandwidth allowances on Windows Server 2003 R2

    Can we set bandwidth allowances for domain users and cut off internet access when it hits a predefined threshold? We are running on a Windows Server 2003 R2 standard network.

    Troubleshooter24755 pointsBadges:
  • Windows Server 2000’s IP address

    From a DOS prompt how can I find out what my Windows Server 2000's  IP address is and how can I verify network connectivity?

    Troubleshooter24755 pointsBadges:
  • InterVlan on Cisco 3560G series switch and Internet Access

    I have a cisco 3560G and 2911 series router.The Router has 2 internet interface.One is already configured to an unmanaged switch.The second interface is also configure and it can go to the internet.My task is to configure vlans on the switch and the vlans should communicate with each others.Also...

    ralph12360 pointsBadges:
  • Avaya CM SIP trunk to Cisco Unity Connection

    Has anyone successfully gotten MWI to pass from Cisco Unity Connection to Avaya CM over SIP trunks?

    Jmac90685 pointsBadges:
  • PIX firewall internet problem

    Hello this is my pix firewall 515E configuration. Password: Type help or '?' for a list of available commands. pixfirewall> en Password: pixfirewall# show runn : Saved : PIX Version 6.3(4) interface ethernet0 auto interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1...

    Uzairahmad25 pointsBadges:
  • VLAN routing in Forinet Firewall

     3 VLANAs define inCisco 3560 L3 switch, switch is connected to Fortigate firewall. VLAN routing is working fine through fortigate but cannot connect to internet through PC any  VLAN

    TRSIT5 pointsBadges:
  • 10 Chances to Win $100

    Starting today (April 25th) and running through May 31st, you have 10 chances to win a $100 Amazon.com gift card. The 10 IT Knowledge Exchange members with the most Knowledge Points earned between today and May 31st will win. Learn how to earn points in the Community Blog, or start answering...

    ITKE353,270 pointsBadges:
  • Cisco VPN not connecting

    Hello Friends. I have a Laptop (HP Elitebook 6930) that has internet connection. Whenever I try to connect to my Company's Network through CVPN, it starts connecting and afterawhile it just brings up a prompt "NOT CONNECTED". Please is anyone aware of this kind of error and how it can be fixed. ...

    Jjjjjjjj95 pointsBadges:
  • Authentication for more than one subnet

    I have about 8 vlans on my catalyst switch connecting pple to the internet.I want to configure authentication for all the users on the vlans. vlan 1 192.168.11.1 255.255.255.0 vlan 2 192.168.12.1 255.255.255.0 vlan 3 192.168.13.1 255.255.255.0 ... vlan 8 192.168.18.1 255.255.255.0 What type of...

    ralph12360 pointsBadges:
  • Can ISPs or the company that issued a Blackberry to me track my internet history?

    I use my Blackberry in place of a wireless card for my laptop (tether feature). I connect to the internet using Verizon's Wireless Broadband service. I would like to know if Verizon or the company that gave me the phone can track or know what I am looking at when I'm using the tether feature....

    Maverick61975 pointsBadges:
  • Pushing out baseline Windows 7 image to Active Directory clients

    Can we easily create a baseline image of our Windows 7 workstations and push it out to each Active Directory client wiping its current OS naming the system by its MAC address. It will have the OS and apps that were in the image. How can we do this?

    NewnanIT1,110 pointsBadges:
  • Configuring managed switch and router in order to have Internet…

    Dear Sir, Could you please help me concerning the following matter: I have Cisco Catalyst 2950 managed switch connected to Linksys WRT54G - Wireless-G Broadband Router, which is then connected to ADSL modem. I need the following scenario: -two VLANs configured on the managed switch, so there will...

    Ivoivo0 pointsBadges:
  • Internet shortcut URL encoding

    How do I force a desktop internet shortcut to go to the specific point I want on a web-page, ie NOT the top of the page ?

    Johnaldo160 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following