• Uplinking one 4000m Hp Procurve to another

    What is the proper way to connect two HP 4000M pro curve switches together? Is there a specific uplink port? Can we connect the switch to the other using two ports for redundancy? (We tried this and it takes the network down!)

    Karl Gechlik9,860 pointsBadges:
  • Figure out length of ethernet runs after the fact

    How can I asses how long my Ethernet runs are to the jacks at a users desk? Is there a software or hardware tool we can use to figure this out?

    Karl Gechlik9,860 pointsBadges:
  • How to configure two default gateways to be 2 ISP (PIX 525)

    I have a network as follows: PIX Firewall 525 uses three network interface Ethernet1, Ethernet2, Ethernet3. E1 (10.0.0.1, Inside) connected to LAN E2 (117.16.126.35, Outside) connected to the modem (117.16.126.33) ISP1 (This address by the ISP level) E3 (192.168.1.2, Outside2) connected to the...

    Arowana200015 pointsBadges:
  • Building a VB application

    I'm about to create a project using VB.net and Microsoft SQL Server. It's not difficult when i'm running it on 1 single computer. The problem is, this application should be located in 1 server and accessible through the network. Is there something different i have to do, or i only need to add the...

    ALittleKid40 pointsBadges:
  • Can a remote access install LoJack to recover a stolen laptop?

    My laptop got stolen yesterday. It has Windows Vista Ultimate 64-bit. Can a remote access find or install LoJack on it?

    NetworkingATE1,545 pointsBadges:
  • No access to mail from outside the network

    Lost all access to my mail from outside the network.  What could be wrong

    Larae5 pointsBadges:
  • ID Theft and National Security

    If it turns out, as I believe, that enemies of the United States are behind a lot of the major ID thefts in the US, that would mean that a lot of money is going to our enemies. Can we therefore surmise that those who mishandle our identity information, by means of their poor stewardship of our...

    InfoSafety75 pointsBadges:
  • How do I set up a NAS network drive and how is it accessed? What about security?

    How can I set up a NAS device on my network? Will the users access files directly on it? Do we need to set security here or will the device be an extension of one of my Windows servers using it’s security? What is common practice?

    Karl Gechlik9,860 pointsBadges:
  • BIOS updates while system is running and without reboot

    We need to do bios updates on our Poweredge 6800. They say that it can be done while the system is running and does not require a reboot. Is this true and if so how is that possible?

    Troubleshooter24755 pointsBadges:
  • Server 2008 R2 DNS and Load testing

    How can I test my DNS server to make sure it is operating properly on a Windows 2008 R2 server? Can I run a stress or load test from there as well? If not how can I do that?

    Karl Gechlik9,860 pointsBadges:
  • Setting up a backup AD server.

    what is the proper method of setting up a second AD server for backup and load balancing? What needs to be setup and what is the proper procedure?

    Karl Gechlik9,860 pointsBadges:
  • Security policy for decommissioning printers & copiers

    We are about to scrap several old copy machines. I know they have hard drives in them. Should they be removed, wiped or what are normal company procedures for destroying any potential data on it before decommissioning it.

    Karl Gechlik9,860 pointsBadges:
  • Netgear router says connected, but there is interference

    My neatgear router says "Connected to wireless network" On my desktop, but, It won't let me get on google chrome. It just says "Webpage not available" and I can't install the drivers because, when I try to it says "Network adapter not connected please connect." Something like that. Anyone know how...

    Totallyblackzebra5 pointsBadges:
  • Update drivers to a Lenovo computer

    Is there a free way to update my outdated drivers? comp:Lenovo system:windows xp

    925025 pointsBadges:
  • Bridging or bonding ethernet & firewalls from separate carriers

    We have two 10 MBit internet connections. They are both Ethernet handoffs and enter two different sonicwall firewalls. Is there a way to bridge or bond these two separate lines? They are from two separate carriers and have separate IP ranges.

    Troubleshooter24755 pointsBadges:
  • Script IP address depending on network or location

    How can we script IP addresses to change depending on location? If a user connects to a specific wireless network set the IP address but if it the ssid is not recognized it leaves dhcp on. Can this be done on a Windows 7 computer?

    Karl Gechlik9,860 pointsBadges:
  • Beginner question #1 – how do I change the ‘mapping’ of material to bin?

    When I generate a TO (I'm using VL01NO), I can specify the material of course, but the bin gets chosen automatically based on a mapping table somewhere. Where can I find, and modify, this mapping?

    JDM10 pointsBadges:
  • windows password question

    I recently purchased a computer from a "going out of business" sale for my fathers business and when I try to logon to Windows I get the logon screen with domain. I have a valid username and password but obviously i am not connected to a domain. I need to bypass this if possible. The safe mode...

    Minxcomp10 pointsBadges:
  • Basic v6 migration steps for companies with public-facing IP addresses

    Hi, My company has public-facing IP addresses, so with the pending IPv4 address exhaustion, I know an IPv6 migration is inevitable. If my goal is to migrate all of the wide area network's IPv4 addresses to v6, what are some very basic steps I need to take to put together a migration plan, i.e.,...

    SearchEnterpriseWAN1,080 pointsBadges:
  • Where are common places IP addresses hide?

    I'm looking to migrate my IPv4-based network to IPv6. But I keep hearing that IP addresses work their way into parts of a network infrastructure that we don't normally think of. So before I do a trial-and-error approach to testing the IPv6 network, what are there common places IP addresses hide so...

    SearchEnterpriseWAN1,080 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following