• Project management, network design for public hotspot

    I want to provide a public hot spot at my restaurant but I need to protect the computers that are on the wired LAN created by the WAP router. I need to protect the wired devices from unauthorized access but still provide authorized access for PC-Anywhere and video surveillance cameras. How can I do...

    NetworkingATE1,545 pointsBadges:
  • Problem VLAN DHCP Server

    Hi my friends! Here is my problem: I have a Switch L3 Dell Power Connect 6248 which has VLANs configured on it. Each VLAN is a LAB. Port 2: VLAN2. 172.31.2.x Port3: VLAN3. 172.31.3.x I have a DHCP Server Windows Server 2008 connected directly on port 20 of this switch and this server has the IP...

    Mdurra25 pointsBadges:
  • WAN Architecture Expert

    I would like to have the typical job activities of a WAN Architecture Expert and what qualifications are required. The WAN Architecture Expert is supposed to assist in the establishment of a Wide Area Network to link up 14 countries customs administrations IT systems to facilitate information...

    Kennygee5 pointsBadges:
  • How do I calculate the 48-bit of a MAC address?

    How do I calculate the 48-bit of a MAC address

    Bubai10 pointsBadges:
  • Need advise: Installing a new workgroup network w/ VoIP

    Hello. I'm installing a new workgroup network that has 25 users with ShoreTel VoIP setup. I'm looking these NETGEAR Products: NetGear GS748TP – 48 port managed switch w/ PoE NetGear FVS124G or FVX538 VPN/firewall NetGear WNDAP330 wireless access point w/ PoE NetGear RND4210 ReadyNAS Storage...

    Jbg00d20 pointsBadges:
  • NIC info via script

    Hiya all, I have made a script (Copy and paste from microsoft, then tweak!!!!) to give me certain PC specs, and want to know how to add the NIC information to it, the script gvies me PC name, manufacturer, CPU make, model, speed, RAM, VGA adapter, and i just wanna add the NIC to it. If I can do...

    Carl0s810 pointsBadges:
  • How do I become an ICT professional?

    How do I become an information and communications technologies (ICT) professional?

    NetworkingATE1,545 pointsBadges:
  • AS/400 Control Panel 65 + 21

    Hi guys, I have a POWER6 using HMC as a console running a stand alone AS/400. What I want is to use LAN console instead of HMC. I set from the control panel to Manual mode. Then pressed 25 + 26, but I noticed that there is no option 65 in the panel, only up to 64. I tried to power down the whole...

    excellentrandy1,275 pointsBadges:
  • Netgear storage with SQL 7

    I have a database stored in my Netgear storage central. When I start my PC, it runs SQL 7 before the drivers for the Netgear, so my database can not be found. What can I do?

    Simonedp5 pointsBadges:
  • Non technical user setting up router.

    I'm a non-technical customer that needs help setting up network. I only know my computers IP address and I need to set up my router. What do I do?

    Cyke97935 pointsBadges:
  • How to establish a VPN?

    What information about a peer would I need to establish a VPN?

    Egilmore350 pointsBadges:
  • One or multiple service providers for the WAN?

    Do you use one or more service providers to provide connectivity to your WAN? Is it worth the extra cost to have redundancy from multiple partners, or is this just throwing money down the drain?

    ITKE361,865 pointsBadges:
  • RS-232 Port Buffer – Hardware protection

    I am looking for a device that attaches between the RS-232 port on a computer (in this case a laptop) and a Serial device (in this case an old programmable logic controller) that acts as a signal buffer. I'm NOT looking for something that stores data, rather I'm looking for a device that will...

    Flame14,925 pointsBadges:
  • Remote Management Via Satellite

    I'm a small ISP. I have approx 40 subscribers. My backhaul is via satellite. The LAN side of the Satellite is Wireless (Router linked to satellite modem, Wireless access point linked to Router via ethernet, CPE's associate wirelessly with AP and customers PC's are linked to CPE via ethernet.)...

    Oigeboy5 pointsBadges:
  • Linux Routing Solution – with Proxy ARP/HTTP management

    Hi Guys, does anyone know of a good Linux routing solution? I need to do the following: network 1 ----> Linux router ---Network 2 ---> ISP switch However, I cannot add a route on the ISP switch due to restrictions. I'm hoping proxy ARP with be the solution. However, I don't know much about...

    IronHedge360 pointsBadges:
  • OSI layer services

    May I know what are the services provided by each of the layers of OSI reference model?

    Alex0535 pointsBadges:
  • Setting up distributed file system on Windows server 2003

    I am trying to implement DFS or distributed file system to replicate my user’s shares across several machines. How can I set this up on Windows 2003? What requirements are there and are there any prerequisites?

    ITKE361,865 pointsBadges:
  • My current network challenge

    Hi everyone, The following is my current task. Setup a network with 6 computers Must have file and printer sharing Internet access Things to consider SECURITY - some computers will be laptops (wireless) and some desktop (hardwired) Connectivity - at least one of these computer will be a mac laptop...

    Ithlete5 pointsBadges:
  • IP Planning

    How do I tell if a IP address ring is full or used up?

    Allion5 pointsBadges:
  • Protecting our internal network

    Hi Network engineers/ managers, I've been faced with a challenge on how to protect our internal network from threats outside with minimal cost, or none at all (at least for the software when using open source) Can anyone advise me what to use? Ive searched about, CISCO ASA, ISA 2003, SNORT,...

    JuneC155 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following