• Is there a way to look at a specific port using a command line?

    Hi everyone! I'm looking for a way to examine the status of a port using the Microsoft Windows command line. I know there's NETSTAT that examines all ports but it's really slow so I want to look at one specific port.

    ITKE345,295 pointsBadges:
  • I need cisco aironet 802.11a/b/g driver for windows xp

    Hi I lost my cd that contained my network wireless adapter aironet 802.11a/b/g driver and I couldn't download it from cisco site!! Could anyone help me!? Thank you. --- Regards Mahnaz

    Aliyani265 pointsBadges:
  • What would be the quickest way to HTTP GET in Python?

    I need to know what the quickest way is to HTTP GET in Python (when I already know the content will be a string). I've been searching documents for one-liners like this: contents = url.get("http://example.com/foo/bar") But all I'm finding is "HTTPLIB" and "URLLIB" and I can't find a shortcut with...

    ITKE345,295 pointsBadges:
  • InterVlan Routing on Cisco

    Hi, I have Ipbase Image on a Cisco 4506 switch and configured several vlans eg. 2,3,4 and each have ip addresses associated with them as given below. interface vlan 2 ip address 172.16.2.1 255.255.255.0 interface vlan 3 ip address 172.16.12.1 255.255.255.0 i have said ip routing but i do not see ip...

    Mannie198035 pointsBadges:
  • To copy IOS of PIX version 6.3 from flash to tftp?

    Hello All, I want to copy ios of pix version 6.3 from flash to tftp……….. Can someone give me the exact command for this? Thanks Rahul

    Rahul Shrivastava330 pointsBadges:
  • Why is a TCP/IP reset RST flag being sent?

    Over the past several days, I can't seem to figure out why my application's TCP/IP connection is basically "hiccuping" every 10 minutes or so. After running Wireshark, I realized the other end is sending a packet with the reset RST flag set (after 10 minutes of inactivity). From what I've read,...

    ITKE345,295 pointsBadges:
  • Intemittent ping timout

    We are getting intermittent ping timeouts (Request Timed Out / Destination host unreacheable) from most of the client workstations that are connecting to an exchange server 5.5 running on W2K server. There are about sixty users on the LAN and 20 others that are coming through the VPN link via a...

    Dechamp0 pointsBadges:
  • Failed to open the group policy object

    On a XP machine I am trying to edit a group policy using the group policy management snap-in and keep getting a error: failed to open the group policy object. you may not have appropriate rights. It works on my other XP machine I'm a domain admin and have the logged on as the same user?

    Sjptarlo0 pointsBadges:
  • How to find packet sent address

    I need to create an automated response so that when I receive a UDP packet for a sender, that sender receives the address it was sent from. I tried using the recvform, but that only brings up the address of the sender, not the the address from which the packet was sent.

    ITKE345,295 pointsBadges:
  • Cisco router 2811 ipv6 configuration

    hi, can someone help me out how to configure ipv6 on fastethernet n serial interface? thanks.

    Vm8185 pointsBadges:
  • how to reduce high CPU and memory utilization

    please suggest me , is there any set of command to reduce high CPU and memory utilization of cisco router

    Vinesh123480 pointsBadges:
  • How to upload & run the .tar file onto Cisco 3750 Switch

    Hello, I have .tar file which i need to upload to switch & run the .tar file , can anyone has steps to do it , please let me know on my mail id . Thanks & Regards Sunny

    8SU15 pointsBadges:
  • Able to ping L3 VPN but unable to tracepath

    I am running an L3 VPN between 2 edge routers and have connected one router to a client (Linux Host). I tried pinging from the client an IP address (present on the other router) that was learnt via BGP VPN. It's pinging, but I am unable to do tracepath from the client. It gives me a "No Reply"...

    SearchEnterpriseWAN1,040 pointsBadges:
  • How to configure Cisco 2811

    How configure cisco 2811 for my small network with two c class ip serieses; keeping the valid security; and configuring ADSL and ISDN module in cisco 2811; from scratch ... step by step

    RizGhauri5 pointsBadges:
  • Is there a command to reset my network adapter?

    When I'm switching between my home and office network, I'm constantly facing issues while trying to get connected to my network. I always have to use "diagnostic service" and the problem gets solved when I reset the network adapter. But it still takes a lot of time and I'm looking for a command...

    ITKE345,295 pointsBadges:
  • How can I get the MAC address from a client’s machine?

    I'm trying to get MAC Address for one of my client's PCs where their website is running. How can I get that? I need the script to be compatible with with IE, Firefox, Safari and Chrome. Thanks for all the help!

    ITKE345,295 pointsBadges:
  • VMware vSphere 5.1 causing network timeouts

    We have a VMware vSphere 5.1 Have recently migrated an application,currently Windows 2008 R2 OS from a previous HP-UX server. Application is much faster and very efficient, except we are having a problem with system timeouts. All application timeout settings have been set to 60 min. But users are...

    dougtom10 pointsBadges:
  • How to configure DNS server & client in Linux RedHat

    How can I configure a DNS server & client in Linux RedHat?

    Sujeet6465 pointsBadges:
  • Two domains, two dhcp servers (help with subnet)

    Hi all, I am having some trouble and I can't get forward... I have two different domains running, both are in the same network. (Scenario is that DC1 is the primary domain of an existing company and DC2 is a new domain for a new company) The DC1 of Domain1 has the ip 10.128.101.3 and the DC2 of...

    Encrypt115 pointsBadges:
  • VPN connection ok, can not ping intranet subnet

    Hello! I am having problem with configuring routing settings in RRS in Windows Server 2003 which is used as VPN server. VPN servers private NIC is in subnet 10.10.0.0/16 and can reach subnet 10.30.0.0/16 (ping request are answered ok). But when I connect to VPN server from client that has public...

    marko0050 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following